Quick Start Guide

– 10 –
Using a Bluetooth headset (optional)
By pairing a Bluetooth headset to the base unit, you can enjoy hands-free conversations when
talking on landline calls.
L Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular
lines, or the headset and 1 cellular line
*1
).
*1 You cannot use a Bluetooth headset to talk on a cellular line.
Pairing a Bluetooth headset to the base unit
1 Bluetooth headset:
Set your headset to pairing mode.
L Refer to your headset’s operating instructions.
2 Handset:
{MENU}(621
1 Pair using the handset.
2 Paring
3 If your headset’s PIN is “0000”, go to step 4.
If your headset’s PIN is not “0000”, press {CLEAR}, then enter your headset’s PIN.
L Typically, the default PIN is “0000”. Refer to the headset's operating instructions.
4 Press {OK}, then wait until a long beep sounds. s {OFF}
L When the Bluetooth headset is ready for use:
− is displayed on the handset (H: Bluetooth headset),
− the CELL 2/HEADSET indicator on the base unit lights up.
Operating a Bluetooth headset using a landline (Base unit)
Refer to your headset’s operating instructions for details.
N Making landline calls with your headset
1 Press your headset’s button referring to your headset’s operating instructions.
2 Press the desired memory dial key ({M1} to {M3}).
3 When you finish talking, press your headset’s button referring to your headset’s operating
instructions.
L If you cannot hang up the call using your headset, press {s} on the base unit 2 times.
N Answering landline calls with your headset
To answer a landline call, press your headset’s button referring to your headset’s operating
instructions.
When you finish talking, press your headset’s button referring to your headset’s operating
instructions.
N Switching between the base unit and your headset
You can switch between the base unit and your headset:
− during a landline call with the base unit speakerphone.
− during an intercom call between the base unit and handset.
− while listening to messages recorded on the base unit answering system.
To switch to your headset:
Turn on the headset referring to your headset’s operating instructions.
To switch to the base unit:
Press {s} on the base unit.
Using Bluetooth devices
2
1
TGM43x_QG(en-en).fm Page 10 Tuesday, April 19, 2016 3:06 PM