Operating Instructions Cordless Telephone with Bluetooth and Digital Answering Machine Model No. KX-TGL460 KX-TGL462 KX-TGL463 Model shown is KX-TGL460. Before initial use, see “Getting Started” on page 10. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Consulte “Guía Rápida Española”, página 75. For assistance, visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A.
Table of Contents Introduction Caller ID Service Model composition .......................................3 Accessory information ..................................3 Using Caller ID service ...............................45 Caller list ....................................................45 Important Information Using Bluetooth® Devices For your safety .............................................6 Important safety instructions ........................7 For best performance ............................
Introduction Model composition Base unit Handset Part No. Part No. KX-TGL460 KX-TGL460 KX-TGLA40 1 KX-TGL462 KX-TGL460 KX-TGLA40 2 KX-TGL463 KX-TGL460 KX-TGLA40 3 Series Model No. KX-TGL460 series Quantity Accessory information Supplied accessories Quantity No.
Introduction Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 85). Accessory item Model number/Specifications Rechargeable batteries HHR-4DPA*1 R To order, please visit http://shop.panasonic.com/support Battery type: – Nickel metal hydride (Ni-MH) – 2 x AAA (R03) size for each handset Range extender KX-TGA405*2 Key detector KX-TGA20*3 *1 *2 *3 Replacement batteries may have a different capacity from that of the supplied batteries.
Introduction Bluetooth® devices You can expand your phone system by pairing the following units to a single base unit. Your Bluetooth cellular phone*1: 2 max. (for cellular calls: page 16) Your Bluetooth headset*1: 1 max. (for a wireless hands-free conversation: page 51) *1 Your cellular phone and headset must be Bluetooth wireless technology compatible. For more details and the list of compatible cellular phones, please visit our Web site: http://shop.panasonic.
Important Information For your safety To prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. R Completely insert the AC adaptor/power plug into the power outlet.
Important Information R This product is unable to make calls when: – the handset batteries need recharging or have failed. – there is a power failure. Battery R We recommend using the batteries noted on page 4. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. R Do not mix old and new batteries. R Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed.
Important Information R If the reception for a base unit location is not satisfactory, move the base unit to another location for better reception. Environment R Keep the product away from electrical noise generating devices, such as fluorescent lamps and motors. R The product should be kept free from excessive smoke, dust, high temperature, and vibration. R The product should not be exposed to direct sunlight. R Do not place heavy objects on top of the product.
Important Information Specifications R Standard: DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) Bluetooth wireless technology 2.1 R Frequency range: 1.92 GHz to 1.93 GHz (DECT) 2.402 GHz to 2.48 GHz (Bluetooth) R RF transmission power: 115 mW (max.) R Power source: 120 V AC, 60 Hz R Power consumption: Base unit: Standby: Approx. 1.1 W Maximum: Approx. 4.0 W Charger: Standby: Approx. 0.1 W Maximum: Approx. 1.
Getting Started n Charger Connect the AC adaptor to the power outlet. Setting up Connections R If you do not connect the telephone line cord and use only cellular lines, set the cellular line only mode to use this unit more conveniently (page 18). n Base unit Connect the AC adaptor to the unit by pressing the plug firmly. Fasten the cord by hooking it. Connect the AC adaptor to the power outlet.
Getting Started Battery charging Charge for about 7 hours. R Confirm “Charging” is displayed (1). R When the batteries are fully charged, “Fully charged” is displayed. 1 R Clean the charge contacts of the handset, base unit, and charger with a soft and dry cloth once a month. Before cleaning the unit, disconnect from power outlets and any telephone line cords. Clean more often if the unit is exposed to grease, dust, or high humidity. Battery level Icon Battery level High Medium Low Needs charging.
Getting Started Controls Handset G H A B C n Control type Soft keys By pressing a soft key, you can select the feature shown directly above it on the display. After a cellular phone is paired, MCELLN is displayed. Navigator key – MDN, MCN, MFN, or MEN: Scroll through various lists and items. – MDN (Mute): Put the call on mute. – MFN W: View the phonebook entry. – MEN (Redial/CID: Caller ID): View the redial list or caller list. – MCN (Call Block): View the call block list.
Getting Started MANSWER ON/OFFN ANSWER ON/OFF indicator ( ) MLOCATORN R You can locate a misplaced handset by pressing MLOCATORN. MERASEN Item Ringer volume is off.*3 (page 22, 35, 37) Silent mode is on. (page 41) Call sharing mode is off. (page 39) Alarm is on. (page 41) Display icons/Indicators Handset number Handset display items Item Meaning Battery level Meaning Blocked call (page 26) Within base unit range Clarity booster is on.*2 (page 23) Out of base unit range The landline is in use.
Getting Started CELL indicators on the base unit Status Meaning The CELL indicators show each cellular line status. Light off – A Bluetooth headset is not paired to the base unit. – The Bluetooth headset is not connected to the base unit. Status Meaning On A cellular phone is connected. Ready to make/receive cellular calls. Flashing – The cellular line is in use. – Phonebook entries are being copied from a cellular phone (page 48). – The base unit is searching for the paired cellular phone.
Getting Started Note: R When English is selected as the display language, 12-hour clock format is used. When Spanish is selected, 24-hour clock format is used. Recording your greeting message You can record your own greeting message instead of using a pre-recorded greeting message. See page 53 for details. 1 2 3 MMENUN#302 MbN: “Yes” a MSELECTN Record a greeting message. a MSTOPN a MOFFN Other settings Dialing mode If you cannot make calls, change this setting according to your telephone line service.
Link to Cell Link to cell feature You can connect your base unit and cellular phone using Bluetooth wireless technology, so that you can make or answer cellular calls using your phone system. This allows you to: – use the unit to talk on cellular calls even if some areas of your home have poor cellular reception, simply by placing your cellular phone in an area with good reception. – talk on cellular calls even if your cellular phone is in your pocket or bag.
Link to Cell 2 MbN: “Yes” a MSELECTN R When the cellular phone is unpaired, the CELL indicator is turned off. 3 MOFFN Link to cell settings Selecting which unit receives cellular calls You can select which unit rings and receives calls for a cellular line. When “All” is selected, all handsets and the base unit ring. 1 For CELL 1: MMENUN#6271 For CELL 2: MMENUN#6272 2 MbN: Select the desired handset or “All”.
Link to Cell base unit, only 2 Bluetooth devices can be used with the unit at the same time, and the base unit loses its connection from other Bluetooth devices. To automatically resume the connection to Bluetooth devices, leave the auto connection on. R Some cellular phones lose connection after usage, please check the specifications of your cellular phone for more details. 1 2 MMENUN#632 MbN: Select the desired setting.
Link to Cell Cellular line selection This feature determines which cellular line is selected to make cellular calls when: – you press MCELLN on the handset. – you press M /ZN on the handset while the cellular line only mode is turned on. The following settings are available: – “Manual” (default): You can select the desired cellular line when making a call. – “Cellphone 1”*1: CELL 1 is selected. – “Cellphone 2”*1: CELL 2 is selected.
Making/Answering Calls Making cellular calls Making landline calls Important: R The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines, or the landline and 1 cellular line). R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). R Before making calls, confirm that the corresponding on the handset is displayed (page 13). 1 Lift the handset and then dial the phone number.
Making/Answering Calls 1 2 3 2 MEN (Redial/CID) R If the caller list is displayed, press MEN (Redial/CID) again to switch to the redial list. MbN: Select the desired entry. n To make a cellular call: MCELLN R The unit starts dialing immediately in the following situations. – Only 1 cellular phone is paired. – A specific line is set to make cellular calls (page 19). MbN: Select the desired cellular phone.
Making/Answering Calls Adjusting the ringer volume 3 Handset n While the handset is ringing for an incoming call: Press MjN or MkN repeatedly to select the desired volume. n While the handset is in standby mode: Press MjN or MkN repeatedly to select the desired volume for landline call. R To turn the ringer off, press MkN repeatedly. Base unit n While the base unit is ringing for an incoming call: Press MjN or MkN repeatedly to select the desired volume.
Making/Answering Calls Note: R MACCEPTN and MFLASHN are soft keys visible on the display during a call. R Please contact your phone service provider for details and availability of this service in your area. Temporary tone dialing for landline calls (for rotary/pulse service users) Press * (TONE) before entering access numbers which require tone dialing. Handset clarity booster This feature can improve sound clarity when the handset is used in an area where there may be interference.
Making/Answering Calls Transferring calls, conference calls Outside calls can be transferred or a conference call with an outside party can be made between 2 handsets. 1 2 3 During an outside call, press MMENUN. MbN: “Intercom” a MSELECTN MbN: Select the desired unit. a MSELECTN R If you select “Voice paging”, the call will be switched from the ear-receiver mode to the speakerphone mode. 4 Wait for the paged party to answer.
Making/Answering Calls Answering a 2nd call during a cellular call 1 2 3 4 *1 Press MMENUN during a cellular call. MbN: “Hold” a MSELECTN To answer the 2nd call: Press M /ZN or MCELLN while the 2nd call is being received. To hang up the 2nd call and return to the 1st call (cellular call), press MOFFN, then press MCELLN.*1 If you press MCELLN and the selection list is displayed, select the desired cellular line and press MSELECTN.
Call Block Call block You can press the MCN (Call Block) key in the following situations to disconnect the current call and add a phone number to the call block list: – when an incoming call is being received – when an incoming call is being recorded by the answering system – when talking on an outside call Once a phone number has been added to the call block list, the unit will block calls from that phone number in the future. 1 Press MCN (Call Block) under the situations shown above.
Call Block n When a cellular phone is not paired: 1 MEN (Redial/CID) R If the redial list is displayed, press MEN (Redial/CID) again to switch to the caller list. 2 3 4 5 MbN: Select the desired entry to be blocked. a MMENUN R To edit the number: MbN: “Edit” a MSELECTN Press MEDITN repeatedly until the phone number is shown in the 10-digit format. a MSAVEN a MbN: “Call block” a MSELECTN a Go to step 4.
Call Block Erasing all call block numbers 1 2 3 4 5 28 MCN (Call Block) MbN: “Block a single number” or “Block range of numbers” a MSELECTN MMENUN a MbN: “Erase all” a MSELECTN MbN: “Yes” a MSELECTN MbN: “Yes” a MSELECTN a MOFFN For assistance, please visit http://shop.panasonic.com/support TGL46x(en)_1118_ver044.
Phonebook Key Operation Phonebook MFN MEN Move the cursor You can add 3,000 names (16 characters max.) and phone numbers (24 digits max.) to the phonebook, and assign each phonebook entry to the desired group (page 30). The following groups are available: – Group 1: “Home”*1 (default) – Group 2: “Cell 1”*1 – Group 3: “Cell 2”*1 – Group 4-9: You can change the group name for each group. *1 For groups 1-3, the group names cannot be changed.
Phonebook 5 Continue from step 3, “Editing entries”, page 31. n When a cellular phone is not paired: 1 MEN (Redial/CID) R If the redial list is displayed, press MEN (Redial/CID) again to switch to the caller list. 2 MbN: Select the desired entry. a MMENUN R To edit the number: MbN: “Edit” a MSELECTN Press MEDITN repeatedly until the phone number is shown in the desired format. a MSAVEN a MbN: “Phonebook” a MSELECTN a Go to step 4.
Phonebook Editing entries 1 2 3 4 5 Find the desired entry (page 30). MMENUN a MbN: “Edit” a MSELECTN Edit the name if necessary. a MOKN Edit the phone number if necessary. a MOKN MbN: Select the desired group (page 30). a MSELECTN 2 times a MOFFN Speed dial You can assign 1 phone number to each of the dial keys (1 to 9) on the handset.
Phonebook Erasing an entry 1 Press and hold the desired speed dial key (1 to 9). a MMENUN 2 3 MbN: “Erase” a MSELECTN MbN: “Yes” a MSELECTN a MOFFN Viewing an entry/Making a call n Using a cellular line: 1 Press and hold the desired speed dial key (1 to 9). 2 MCELLN R The unit starts dialing immediately in the following situations. – Only 1 cellular phone is paired. – A specific line is set to make cellular calls (page 19). 3 MbN: Select the desired cellular phone.
Programming Menu list To access the features, there are 2 methods. n Scrolling through the display menus 1 MMENUN 2 3 4 Press MCN or MDN to select the desired main menu. a MSELECTN Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN Press MCN or MDN to select the desired setting. a MSAVEN n Using the direct command code 1 MMENUN a Enter the desired code. Example: Press MMENUN#101. 2 Select the desired setting. a MSAVEN Note: R To exit the operation, press MOFFN.
Programming Sub-menu 1 Sub-menu 2 Settings Code New message alert*1 Outgoing call – On/Off On #338 55 Outgoing call – Notification to Settings – Outgoing call – Remote code Activate Base unit beep On #339 55 Ring count*1 Toll saver 2-7 rings <4 rings> #211 58 Recording time*1 <3 min> 1 min Greeting only*2 #305 58 Remote code*1 <111> #306 57 Screen call Off #310 58 Answer on*1 – – #327 53 Answer off*1 – – #328 53 Main menu: “Voicemail
Programming Main menu: “Bluetooth” Sub-menu 1 Sub-menu 2 Link to cell – 1:Add new device*4 (for CELL 1) – 2:Add new device*4 (for CELL 2) Connect*1/ Disconnect*1 Settings Code – #6251*5 Ringer volume – Handset Off–6 <6> Ringer volume – Base unit*1 Off–6 <1> Ringer tone*7 *5 *6 #6291*5 Select unit to ring*1 Handset 1-6 #6271*5 Ring as cell (limited)*1 On (without Talking CID) Off #6141*5 Alert settings*1 – Alert On/Off Off #6101*5 Al
Programming Sub-menu 1 Sub-menu 2 Settings Code Settings Auto connect*1 Off <1 min> 3 min 5 min 10 min #632 17 #633 19 Cell line only mode*1 On – #157 18 Cell line select Cellphone 1*4 Cellphone 2*4 #634 19 Set PIN*1 <0000> Cell area code*1 Main menu: #619 19 International code*1 – #117 48 Country code*1 – #118 Trunk prefix*1 – #119 “Set date & time” Sub-menu 2 Sub-menu 1 Memo alarm Alarm1–3 Time adjustment*1, *9 Main menu: Settings – Date and time*1
Programming Main menu: “Settings” Sub-menu 1 Sub-menu 2 Settings Code Ring adjustments Ringer volume (Incoming) – Handset*3 Off–6 <6> #160 – Ringer volume (Incoming) – Base unit*1, *3 Off–6 <1> #G160 – Intercom ringer volume (Handset) 1–6 <6> #175 – Ringer tone (Incoming)*3, *7, *10 (Handset) #161 – Intercom ringer tone*7, *10 (Handset) #163 – Interrupt tone*11 Off #201 24 Silent mode – On/Off On #238 41 Silent mode – Start/End <11:00 PM/06:00
Programming Sub-menu 1 Sub-menu 2 Settings Code Key detector setting*12 – 1:Add new device (for Detector1)*13 – 2:Add new device (for Detector2) – 3:Add new device (for Detector3) – 4:Add new device (for Detector4) Change name*1 Detector1 #6561 Detector2*14 #6562*14 Detector3*14 #6563*14 Detector4*14 #6564*14 Registration – #6571 – – #6572*14 #6573*14 #6574*14 Deregistration – #6581 – #6582*14 #6583*14 #6584*14 Call block*1 Block a single number – Block range of numbers – #217
Programming Settings Code Caller ID edit (Caller ID number auto edit) Sub-menu 1 Sub-menu 2 – Off #214 46 Auto talk*15 – On #200 21 Set dial mode*1 Pulse #120 15 Set flash time*1, *16 80 ms 90 ms 100 ms 110 ms 160 ms 200 ms 250 ms 300 ms 400 ms 600 ms <700 ms> 900 ms #121 22 Set line mode*1, *17 A #122 – Off #194 23 Set tel line*3 – Call sharing*1 Registration Change language Main menu: Register handset – #130 44 Deregistration*2 – #131 44 D
Programming Main menu: “Key detector”*12 Sub-menu 1 Sub-menu 2 Settings Code Search – – Battery check – – *1 *2 *3 *4 *5 *6 *7 *8 *9 *10 *11 *12 *13 *14 *15 *16 *17 40 #655 – If you program these settings using one of the units, you do not need to program the same item using another unit. This menu is not displayed when scrolling through the display menus. It is only available in direct command code. When the cellular line only mode is turned on, these menus are not displayed (page 18).
Programming Alarm An alarm sounds at the set time for 1 minute and is repeated 5 times at 5 minute intervals (snooze function). A text memo can also be displayed for the alarm. A total of 3 separate alarm times can be programmed for each handset. You can set one of 3 different alarm options (once, daily, or weekly) for each alarm time. Important: R Make sure the unit’s date and time setting is correct (page 14). 1 2 3 MMENUN#720 MbN: Select the desired alarm.
Programming 2 MbN: Select the desired setting. a MSAVEN R If you select “Off”, press MOFFN to exit. 3 Enter the desired hour and minute you wish to start this feature. 4 5 6 7 *: Select “AM” or “PM”. a MOKN Enter the desired hour and minute you wish to end this feature. *: Select “AM” or “PM”. MSAVEN a MOFFN Changing the start and end time 1 2 MMENUN#237 Continue from step 3, “Turning silent mode on/off”, page 41.
Programming n From the phonebook: 1 MMENUN#268 2 3 4 5 MbN: “On” a MSELECTN MbN: Select “Outgoing call” to monitor from outside. a MADDN MbN: “Phonebook” a MSELECTN MbN: Select the phonebook entry. a MSAVEN R “Baby monitor” will be displayed. Note: R If you edit a phonebook entry which is assigned for monitoring, the edited entry does not transfer to the monitor. n By entering phone numbers: 1 MMENUN#268 2 3 4 5 6 MbN: “On” a MSELECTN MbN: Select “Outgoing call” to monitor from outside.
Programming n When monitoring from outside: Answer the call. If you want to respond from your monitoring phone, press #1 using tone dialing. You can turn off the baby monitor feature by pressing #0. Note: R The unit disconnects the call automatically after 2 minutes. Other programming Changing the handset name The default handset name is “Handset 1” to “Handset 6”. You can customize the name of each handset (“Bob”, “Kitchen”, etc.). This is useful when you make intercom calls between handsets.
Caller ID Service Using Caller ID service Important: R This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. Contact your phone service provider for details. Caller ID features When an outside call is being received, the caller information is displayed. Caller information for the last 50 callers is logged in the caller list from the most recent call to the oldest.
Caller ID Service 4 MCELLN R The unit starts dialing immediately in the following situations. – Only 1 cellular phone is paired. – A specific line is set to make cellular calls (page 19). 5 MbN: Select the desired cellular phone. a MSELECTN n Using a landline 1 MEN (Redial/CID) R If the redial list is displayed, press MEN (Redial/CID) again to switch to the caller list. 2 Press MCN to search from the most recent call, or MDN to search from the oldest call.
Caller ID Service Erasing selected caller information 1 2 3 MEN (Redial/CID) R If the redial list is displayed, press MEN (Redial/CID) again to switch to the caller list. MbN: Select the desired entry. MERASEN a MbN: “Yes” a MSELECTN a MOFFN Erasing all caller information 1 MEN (Redial/CID) R If the redial list is displayed, press MEN (Redial/CID) again to switch to the caller list. 2 MERASEN a MbN: “Yes” a MSELECTN a MOFFN For assistance, please visit http://shop.panasonic.
Using Bluetooth® Devices Copying phonebook from a cellular phone (phonebook transfer) You can copy phonebook entries from the paired cellular phones or other cellular phones (not paired) to the unit’s phonebook. A cellular phone must be compatible with Bluetooth wireless technology. Important: R Your cellular phone must support Phone Book Access Profile (PBAP) or Object Push Profile (OPP) specification. R If a copied entry has 2 or more phone numbers, each phone number (6 max.
Using Bluetooth® Devices – “Trunk prefix”: A trunk prefix; the initial digit(s) to be dialed in a domestic call, prior to the area code. 1 2 MMENUN To store “International code”: #117 To store “Country code”: #118 To store “Trunk prefix”: #119 3 Enter the desired number. a MSAVEN a MOFFN Note: R After you copy the entries, confirm that the numbers were transferred correctly.
Using Bluetooth® Devices – Handset: “Alert On/Off” must be turned on (page 50). R If this feature does not work, turn on your device’s Bluetooth feature, unplug the base unit’s AC adaptor, and then reconnect it. *1 Turning on [Application Alerts manager] Use the following procedure after installing the Link to Cell app. Android 2.x: Open your device’s [Settings] app. a Tap [Accessibility]. a Turn on the [Accessibility] and [Application Alerts manager] checkboxes. Android 4.
Using Bluetooth® Devices Using a Bluetooth wireless headset (optional) for landline calls Connecting/disconnecting a headset If you cannot connect the headset and base unit using the headset, you can connect using the handset. To use your headset with another Bluetooth device such as a cellular phone, you may need to disconnect it from the base unit. Important: R Make sure that the headset is turned on.
Using Bluetooth® Devices Switching between the base unit and your headset You can switch between the base unit and your headset while listening to messages recorded on the base unit answering system. R You can only switch from the base unit to your headset. n To switch to your headset: Turn on the headset referring to your headset operating instructions. Call sharing between your headset and the handset Important: R To activate this feature, you should set call sharing mode to on beforehand (page 39).
Answering System for Landline Answering system for landline The answering system can answer and record calls for you when you are unavailable to answer the phone. You can also set the unit to play a greeting message but not to record caller messages by selecting “Greeting only” as the recording time setting (page 58). Important: R Make sure the unit’s date and time setting is correct (page 14). Memory capacity (including your greeting message) The total recording capacity is about 18 minutes.
Answering System for Landline Resetting to a pre-recorded greeting message Use this procedure to erase your greeting message and use a pre-recorded one. 1 2 Key Operation MERASEN Erase currently playing message *1 MMENUN#304 MYESN a MOFFN If pressed within the first 5 seconds of a message, the previous message is played. Erasing all messages Playing back the greeting message Press MERASEN 2 times while the unit is not in use. 1 2 Using the handset MMENUN#303 To exit, press MOFFN.
Answering System for Landline Key Operation 9 or MSTOPN Stop recording Stop playback 0 Turn answering system off *4*3 Erase currently playing message *5 Erase all messages *6 Reset to a pre-recorded greeting message *1 If pressed within the first 5 seconds of a message, the previous message is played.
Answering System for Landline – store a phone number to which the unit makes the call to. – turn on the new message alert setting. After you answer the new message alert call, you can listen to messages from that call (page 56). This feature is only available for landline. Important: R A new message alert is stopped 1 minute after the unit starts to call. The unit will not retry the call even if the call is not answered.
Answering System for Landline n When the remote access code is set to “Activate”: 1 Enter the remote access code (page 57) during the announcement. 2 Press 4 to play the new message. Note: R Within 10 seconds after listening to new messages, you can press #9 during the call to turn off the new message alert by a call feature. R Even if the unit makes a new message alert call, the handset redial list does not show the record.
Answering System for Landline Key Operation *5 Erase all messages *# End remote operation (or hang up) *1 *2 *3 If pressed within the first 5 seconds of a message, the previous message is played. For English voice guidance only For Spanish voice guidance only Turning on the answering system remotely 1 Dial your phone number from a touch-tone phone. 2 Let the phone ring 15 times. R A long beep is heard. 3 Enter your remote access code within 10 seconds after the long beep.
Useful Information Example: Voicemail service for landline In addition to your unit’s answering system you may also have voicemail service from your phone service provider. Voicemail is an answering service that may be offered by your phone service provider. This service can also record calls when you are unavailable to answer the phone or when your line is busy. Messages are recorded on the phone company system and not on the unit’s answering system.
Useful Information 2 3 Follow the pre-recorded instructions. 2 When finished, hang up. Note: R You can also use the MACCESSN soft key, if displayed, to play new voicemail messages. R If the handset still indicates there are new messages even after you have listened to all new messages, turn it off by pressing and holding # until the handset beeps. Tuck the telephone line cord inside the wall mounting adaptor (A). Connect the AC adaptor cord and telephone line cord (B).
Useful Information 4 Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until it clicks into place. 5 Mount the unit on a wall then slide down to secure in place. 1 AC adaptor cord R This product is compliant with the following wall phone plate sizes (2 types). 2 83 mm (3 1/4 inches) 3 102 mm (4 inches) Fit the slots of the unit onto the corresponding wall phone plate tabs for (4) and (5) respectively. 1 4 5 4 2 5 3 For assistance, please visit http://shop.
Useful Information To remove the wall mounting adaptor While pushing down the release levers (A), remove the adaptor (B). A A B Charger Drive the screws (1) (not supplied) into the wall. 2 27.2 mm (1 1/16 inches) 2 1 62 For assistance, please visit http://shop.panasonic.com/support TGL46x(en)_1118_ver044.
Useful Information Error messages Display message Cause/solution Ask phone company for VM access # R You have not stored the voicemail access number. Store the number (page 59). Base no power or No link. Reconnect base AC adaptor. R Confirm the base unit’s AC adaptor is connected to the unit and the power outlet correctly. R The handset has lost communication with the base unit. Move closer to the base unit and try again. R Unplug the base unit’s AC adaptor to reset the unit.
Useful Information Display message Cause/solution Requires subscription to Caller ID. R You must subscribe to a Caller ID service. Once you receive caller information after subscribing to a Caller ID service, this message will not be displayed. Use rechargeable battery. R A wrong type of battery such as alkaline or manganese was inserted. Use only the rechargeable Ni-MH batteries noted on page 4, 7.
Useful Information Problem Cause/solution I cannot connect a cellular phone to the base unit. R Confirm that your cellular phone is turned on. R Confirm that your cellular phone is within base unit range (page 13). R Your cellular phone’s Bluetooth feature is turned off. Turn it on. R Depending on the state of the wireless environment, such as the presence of any electrical interference, there may be a delay even if the auto connection feature is turned on.
Useful Information Problem Cause/solution I fully charged the batteries, but – still flashes, – is displayed, or – the operating time seems to be shorter. R Clean the battery ends ( , ) and the charge contacts with a dry cloth and charge again. R It is time to replace the batteries (page 10). Making/answering calls, intercom Problem Cause/solution R The handset is too far from the base unit. Move closer. R The base unit’s AC adaptor is not properly connected. Reconnect AC adaptor to the base unit.
Useful Information Problem Cause/solution I can make and answer cellular calls but cannot hear a sound. R The Bluetooth technology on your cellular phone may not be functioning normally. Turn off and on your cellular phone. R Disconnect and reconnect the base unit AC adaptor and try again. I cannot switch cellular calls from the unit to the cellular phone. R Your cellular phone may not support this feature. Refer to the operating instructions of your cellular phone.
Useful Information Problem Cause/solution Caller information is not announced. R The ringer volume for landline is turned off. Adjust the ringer volume (page 37). R The ringer volume for cellular line is turned off. Adjust the ringer volume (page 35). R The unit which is not selected to ring for cellular calls does not announce caller information. To change the selection, see page 17. R The Talking Caller ID feature is turned off. Turn it on (page 37).
Useful Information Using Bluetooth devices Problem Cause/solution I cannot copy phonebook entries from a cellular phone. R Confirm that the cellular phone supports Bluetooth wireless technology. R Confirm that the cellular phone supports the Phone Book Access Profile (PBAP) or Object Push Profile (OPP) specification. R If the cellular phone is already connected to another Bluetooth device such as a Bluetooth headset, turn it off or disconnect it from the cellular phone.
Useful Information Problem Cause/solution App alert is not displayed or announced. or Text message alert is not displayed or announced. R Confirm that the cellular phone supports the Message Access Profile (MAP) specification to use text message alert feature. R Confirm that the cellular phone supports the Serial Port Profile (SPP) specification to use App alert feature. R Confirm that the [Application Alerts manager] setting of your Android phone is turned on. R “Alert On/Off” is set to “Off”.
Useful Information Problem Cause/solution The unit does not emit the specified number of rings. R If the first ring is turned off (“No”) (page 27), the number of rings decreases by 1 from the specified number of rings. Bluetooth PIN Problem Cause/solution I cannot remember the PIN. R Change the PIN using the following method. 1 2 3 4 MMENUN#619 *7000 Enter the new 4-digit PIN. a MOKN Enter the new 4-digit PIN again. a MSAVEN a MOFFN Voicemail Problem Cause/solution “Voicemail msg. via phone co.
Useful Information FCC and other information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------. If requested, this number must be provided to the telephone company. L Registration No.............(found on the bottom of the unit) L Ringer Equivalence No. (REN).......0.
Useful Information manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices. WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS: 1) Remain on the line and briefly explain to the dispatcher the reason for the call. 2) Perform such activities in the off-peak hours, such as early morning or late evenings. This device complies with Part 15 of the FCC Rules.
Useful Information Compliance with TIA-1083 standard: Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants. Compatible with Hearing Aid T-Coil T TIA-1083 74 For assistance, please visit http://shop.panasonic.com/support TGL46x(en)_1118_ver044.
Guía Rápida Española Guía Rápida Española Conexiones Unidad base 1 Conecte el adaptador de corriente alterna a la unidad presionándolo firmemente. 2 Enganche el cable para fijarlo. 3 Conecte el adaptador de corriente alterna a la toma de corriente. 4 Conecte el cable de la línea telefónica a la unidad, y después a la toma telefónica de una sola línea (RJ11C) hasta que escuche un clic. 5 Se requiere un filtro DSL/ADSL (no incluido) si tiene este tipo de servicio.
Guía Rápida Española Sugerencias de operación Teclas de función Al oprimir una tecla de función, puede seleccionar la función que aparece directamente encima de ella en la pantalla. Preste atención a la pantalla para ver qué funciones están asignadas a las teclas de función durante la operación. Tecla de volumen Oprima {+} o {-} repetidamente: − ajustar el volumen del timbre. − ajustar el volumen del receptor o del altavoz mientras habla.
Guía Rápida Española Fecha y hora (Auricular) 1 2 3 4 {MENU}(1)1 Introduzca el día, mes y año actuales. s {OK} Introduzca la hora y minuto actuales (formato de reloj de 24 horas). {GUARDAR} s {OFF} Cómo grabar el mensaje de saludo del contestador de llamadas para la línea terrestre (Auricular) Puede grabar su propio mensaje de saludo en lugar de usar uno pregrabado. 1 {MENU}(3)2 s {r}: “Sí” s {SELEC.
Guía Rápida Española Enlace a celular Cómo emparejar un teléfono celular con Bluetooth 1 Unidad base: Oprima y mantenga oprimido {CELL 1} o {CELL 2} durante aproximadamente 5 segundos. L Después de que el indicador de CELL correspondiente comienza a parpadear en la unidad base, el resto del procedimiento debe completarse en menos de 5 minutos.
Guía Rápida Española Enlace a celular Cómo conectar o desconectar el teléfono celular (Auricular) Conexión automática a los dispositivos con Bluetooth (teléfonos celulares) La unidad se conecta a los dispositivos Bluetooth a intervalos regulares si se pierde la conexión. Consulte las instrucciones de operación para cambiar el intervalo (predeterminado: “1 min”).
Guía Rápida Española Operaciones básicas Cómo hacer y contestar llamadas (Auricular) Para hacer llamadas de celular 1 2 Marque el número telefónico. s {CEL.} L Cuando el modo exclusivo para la línea celular está configurado, también puede oprimir {C/s} en lugar de {CEL.}. L Cuando solo hay 1 teléfono celular emparejado, la unidad comienza a marcar. Cuando hay 2 teléfonos celulares emparejados: {r}: Seleccione el teléfono celular deseado. s {SELEC.
Guía Rápida Española Operaciones básicas Directorio telefónico (Auricular) Para añadir entradas 1 2 3 4 Para hacer llamadas 1 2 {<} k s {MENU} {r}: “Agregar Ent. Nueva” s {SELEC.} Introduzca el nombre de la persona (máx. 16 caracteres). s {OK} Introduzca el número telefónico de la persona (máx. 24 dígitos). s {OK} 5 {r}: Seleccione el grupo deseado. s {SELEC.} 2 veces s {OFF} L En el paso 3, puede cambiar el idioma de introducción de caracteres. ( s {r}: Seleccione el idioma deseado.
Guía Rápida Española Cómo usar dispositivos Bluetooth Copiado de entradas del directorio telefónico desde un teléfono celular con Bluetooth (transferencia del directorio telefónico) Puede copiar entradas del directorio telefónico desde los teléfonos celulares emparejados o desde otros teléfonos celulares (no emparejados) al directorio telefónico de la unidad. 1 Auricular: {MENU}(618 2 Auricular: Para copiar desde teléfonos celulares emparejados: {r}: Seleccione el teléfono celular deseado. s {SELEC.
Guía Rápida Española Cómo usar dispositivos Bluetooth Cómo usar un audífono Bluetooth (opcional) para llamadas por la línea terrestre Al emparejar un audífono Bluetooth con la unidad base, podrá tener conversaciones inalámbricas a manos libres para llamadas terrestres. L Solo se pueden usar 2 dispositivos Bluetooth con la unidad al mismo tiempo (por ejemplo, 2 líneas celulares o el audífono y 1 línea celular).
Guía Rápida Española Preguntas frecuentes Pregunta Causa y solución ¿Por qué aparece _? L El auricular está demasiado lejos de la unidad base. Acérquelo. L El adaptador para corriente de la unidad base no está conectado correctamente. Conecte de nuevo el adaptador para corriente a la unidad base. L El auricular no está registrado en la unidad base. Regístrelo. 1 Auricular: {MENU}(13) 2 Unidad base: Oprima y mantenga oprimido {LOCATOR} durante aproximadamente 5 segundos.
Appendix Customer services Shop Accessories! for all your Panasonic gear Go to hp://shop.panasonic.com/support Get everything you need to get the most out of your Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Baeries, Backup Chargers & more… Customer Services Directory For Product Informa!on, Opera!ng Assistance, Parts, Owner’s Manuals, Dealer and Service info go to hp://shop.panasonic.
Appendix Limited Warranty (ONLY FOR U.S.A.
Appendix Limited Warranty Limits and Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
Index Index # A B C D 3-way conference: 23 Additional handset: 44 Alarm: 41 Answering calls: 21 Answering system Call screening: 58 Erasing messages: 54, 55, 57 Greeting message: 53 Greeting only: 58 Listening to messages: 54, 57 New message alerting: 55 Number of rings: 58 Recording time: 58 Remote access code: 57 Remote operation: 57 Ring count: 58 Toll saver: 58 Turning on/off: 53 Auto intercom: 25 Auto talk: 21, 39 Baby monitor: 42 Battery: 10, 11 Bluetooth wireless technology Cellular phone (Link
Index V W Troubleshooting: 64 TTY: 85 VM (Voicemail): 59 Voice announcement language: 14 Voice paging: 25 Voicemail: 59 Volume Receiver: 20 Ringer (Base unit): 22, 35, 37 Ringer (Handset): 22, 35, 37 Ringer for intercom call (Handset): 37 Ringer for outside call (Handset): 22, 35, 37 Speaker: 20 Wall mounting: 60 89 TGL46x(en)_1118_ver044.
Notes 90 TGL46x(en)_1118_ver044.
Notes 91 TGL46x(en)_1118_ver044.
IMPORTANT! If your product is not working properly. . . 1 Reconnect AC adaptor to the base unit. 2 Check if telephone line cord is connected. 3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.) 4 Read troubleshooting page in the Operating Instructions. Visit our Web site: http://shop.panasonic.com/support L FAQ and troubleshooting hints are available.
