Operating Instructions Cordless Telephone with Digital Answering Machine Model No. KX-TGF540 KX-TGF542 KX-TGF543 KX-TGF544 KX-TGF545 Model shown is KX-TGF540. Before initial use, see “Getting Started” on page 10. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Consulte “Guía Rápida Española”, página 61. For assistance, visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A.
Table of Contents Introduction Answering System Model composition .......................................3 Accessory information ..................................3 Graphical symbols for use on equipment and their descriptions ..........................................5 Answering system ......................................43 Turning the answering system on/off .........43 Greeting message ......................................43 Listening to messages ...............................
Introduction Model composition Base unit Handset Part No. Part No. KX-TGF540 KX-TGF540 KX-TGFA50 1 KX-TGF542 KX-TGF540 KX-TGFA50 2 KX-TGF543 KX-TGF540 KX-TGFA50 3 KX-TGF544 KX-TGF540 KX-TGFA50 4 KX-TGF545 KX-TGF540 KX-TGFA50 5 Series Model No. KX-TGF540 series Quantity Accessory information Supplied accessories No. Supplied handset qty.
Introduction Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 66). Accessory item Model number/Specifications Rechargeable batteries HHR-4DPA*1 R To order, please visit http://shop.panasonic.
Introduction Graphical symbols for use on equipment and their descriptions Symbol Explanation Symbol Explanation Alternating current (A.C.) Class P equipment (equipment in which protection against electric shock relies on Double Insulation or Reinforced Insulation) Direct current (D.C.
Important Information For your safety To prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. R Completely insert the AC adaptor/power plug into the power outlet.
Important Information R This product is unable to make calls when: – the handset batteries need recharging or have failed. – there is a power failure. Battery R We recommend using the batteries noted on page 4. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. R Do not mix old and new batteries. R Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed.
Important Information R If the reception for a base unit location is not satisfactory, move the base unit to another location for better reception. Environment R Keep the product away from electrical noise generating devices, such as fluorescent lamps and motors. R The product should be kept free from excessive smoke, dust, high temperature, and vibration. R The product should not be exposed to direct sunlight. R Do not place heavy objects on top of the product.
Important Information Specifications R Standard: DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) R Frequency range: 1.92 GHz to 1.93 GHz R RF transmission power: 115 mW (max.) R Power source: 120 V AC, 60 Hz R Power consumption: Base unit: Standby: Approx. 1.0 W Maximum: Approx. 4.3 W Charger: Standby: Approx. 0.1 W Maximum: Approx. 1.8 W R Operating conditions: 0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 % relative air humidity (dry) For assistance, please visit http://shop.panasonic.
Getting Started n Charger Connect the AC adaptor to the power outlet. Setting up Connections n Base unit Connect the AC adaptor to the unit by pressing the plug firmly. Fasten the cord by hooking it. Connect the AC adaptor to the power outlet. Connect the telephone line cord to the unit, then to the single-line telephone jack (RJ11C) until you hear a click. A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service. Note: R Use only the supplied Panasonic AC adaptor PNLV226.
Getting Started Removing the battery Note when setting up Note for connections R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a horizontally oriented AC outlet that faces the floor, such as an AC outlet installed on a ceiling or under a table, as the weight of the adaptor may cause it to become disconnected.
Getting Started R You can set the unit to play a voice announcement when the battery is low or needs charging (page 15). Panasonic Ni-MH battery performance (supplied batteries) Operation Operating time In continuous use 12 hours max.*1 Not in use (standby) *1 7 days Controls Handset A I max.*1 If eco mode is on. Note: R Actual battery performance depends on usage and ambient environment.
Getting Started MOFFN ( ) MFLASHN MCALL WAITN Charge contacts n Control type Soft keys By pressing a soft key, you can select the feature shown directly above it on the display. Navigator key – MDN, MCN, MFN, or MEN: Scroll through various lists and items. – VOL. (Volume: MDN or MCN): Adjust the receiver or speaker volume while talking. – MFN W: View the phonebook entry. – MEN REDIAL: View the redial list. – MCN CID (Caller ID): View the caller list.
Getting Started Item Meaning Item Meaning Eco mode is on. (page 12) Line in use Someone is using the line. Noise reduction is set. (page 18) Equalizer is set. (page 18) Z Speakerphone is on. (page 16) Ringer volume is off. (page 17, 31) Silent mode is on. (page 36) Call sharing mode is off. (page 33) Alarm is on. (page 36) Handset number Battery level Blocked call (page 22) Clarity booster is on. (page 18) Baby monitor is activated.
Getting Started 4 5 6 Enter the current hour and minute (12-hour clock format) by selecting 2 digits for each. Example: 9:30 09 30 *: Select “AM” or “PM”. MSAVEN a MOFFN Note: R When English is selected as the display language, 12-hour clock format is used. When Spanish is selected, 24-hour clock format is used. Recording your greeting message You can record your own greeting message instead of using a pre-recorded greeting message. See page 43 for details.
Making/Answering Calls Making calls Using the handset 1 Lift the handset and then dial the phone number. R To correct a digit, press MCLEARN. 2 Press M N to make the call. R To make the call using the speakerphone, press MZN. 3 When you finish talking, press MOFFN or place the handset on the base unit or charger. Note: R To switch to the speaker, press MZN. To switch back to the receiver, press MZN/ M N. R In step 1, you can store the dialed phone number to the phonebook by pressing MSAVEN.
Making/Answering Calls Base unit 1 2 One-touch ringer off for the handset 9 a MPAUSEN Dial the phone number. aMZN Note for handset and base unit: R A 3.5 second pause is inserted each time you press MDN (Pause) on the handset or MPAUSEN on the base unit. Useful features during a call Answering calls Using the handset 1 Lift the handset and then press M M N when the unit rings. Press and hold 0 ( ) until the unit beeps to turn the ringer off.
Making/Answering Calls 2 To return to the call, press MMUTEN. Note for handset and base unit: R MMUTEN is a soft key visible on the display during a call. Flash Handset / Base unit MFLASHN allows you to use the special features of your host PBX such as transferring an extension call, or accessing optional telephone services. Note: R To change the flash time, see page 33.
Making/Answering Calls R To put the outside call on hold: MMENUN a MbN: “Hold” a MSELECTN To resume the conference: MMENUN a MbN: “Conference” a MSELECTN R To cancel the conference: MMENUN a MbN: “Stop conference” a MSELECTN You can continue the conversation with the outside caller. Base unit Call share You can join an existing outside call. Handset To join the conversation, press M N when the other unit is on an outside call.
Making/Answering Calls – Base unit: To finish intercom, press MZN. To answer the call, press MZN again. 2 Note for handset: R To change the ringer volume and ringer tone for intercom, see page 31. 1 2 Making an intercom call Turning auto intercom on/off Handset 1 MMENUN a MbN: “Intercom” a MSELECTN 2 MbN: Select the desired unit or “Voice paging”. a MSELECTN R If you select “Voice paging”, speak into the microphone after the beep.
Making/Answering Calls pressing MOFFN on the handset, place it on the base unit to start power backup mode. R Power backup mode will not work if the battery level of the power supplying handset is or . R Do not lift the power supplying handset from the base unit during power backup mode. Panasonic Ni-MH battery performance (supplied batteries) during power backup mode When the batteries are fully charged, operating time of the handset in power backup mode varies depending on usage.
Call Block Call block You can press the MCALL BLOCKN button in the following situations to disconnect the current call and add a phone number to the call block list: – when an incoming call is being received – when an incoming call is being recorded by the answering system – when talking on an outside call Once a phone number has been added to the call block list, the unit will block calls from that phone number in the future. Handset / Base unit 1 Press MCALL BLOCKN under the situations shown above.
Call Block 2 MbN: Select the entry to be blocked. R To edit the number: Press MEDITN repeatedly until the phone number is shown in the 10-digit format. 3 4 5 MCALL BLOCKN MbN: “Yes” a MSELECTN Edit the phone number if necessary (24 digits max.). a MSAVEN a MEXITN Adding call blocked numbers manually Handset 1 2 3 4 MCALL BLOCKN MbN: “Block a single number” a MSELECTN MMENUN a MbN: “Add” a MSELECTN Enter the phone number (24 digits max.).
Call Block Viewing/editing/erasing call block numbers Handset 1 2 MCALL BLOCKN MbN: “Block a single number” or “Block range of numbers” a MSELECTN 3 MbN: Select the desired entry. R After viewing, press MOFFN to exit. 4 To edit a number: MEDITN a Edit the number.
Phonebook Phonebook You can add 100 names (16 characters max.) and phone numbers (24 digits max.) to the phonebook, and assign each phonebook entry to the desired group (page 26). Important: R All entries can be shared by the base unit and any registered handset. Adding phonebook entries Handset 1 2 3 4 5 MFN W a MMENUN R If you do not press any dial key within 2 seconds after entering a character, the character is fixed and the cursor moves to the next space.
Phonebook 4 Continue from step 3, “Editing entries”, page 26. Base unit 1 2 5 MbN: Select the current setting of the group ringer tone. a MSELECTN a MbN: Select the desired ringer tone. a MSAVEN MOFFN MCIDN MbN: Select the desired entry. R To edit the number, press MEDITN repeatedly until the phone number is shown in the desired format.
Phonebook Erasing entries Erasing an entry Handset 1 2 3 Find the desired entry (page 26). MMENUN a MbN: “Erase” a MSELECTN MbN: “Yes” a MSELECTN a MOFFN Base unit 1 2 Find the desired entry (page 26).
Phonebook Editing an entry Handset 1 Press and hold the desired speed dial key (1 to 9). a MMENUN 2 3 4 MbN: “Edit” a MSELECTN Edit the name if necessary. a MOKN Edit the phone number if necessary. a MOKN a MSELECTN a MOFFN Erasing an entry Handset 1 Press and hold the desired speed dial key (1 to 9). a MMENUN 2 3 MbN: “Erase” a MSELECTN MbN: “Yes” a MSELECTN a MOFFN Viewing an entry/Making a call Handset 1 Press and hold the desired speed dial key (1 to 9). 2 To make a call, press M 28 N.
Programming Menu list To access the features, there are 2 methods. Handset / Base unit n Scrolling through the display menus 1 MMENUN 2 3 4 Press MCN or MDN to select the desired main menu. a MSELECTN Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN Press MCN or MDN to select the desired setting. a MSAVEN n Using the direct command code 1 MMENUN a Enter the desired code. Example: Press MMENUN#101. For available code: – Handset: see page 29. – Base unit: see page 34.
Programming Sub-menu 1 Sub-menu 2 Greeting Record greeting*1 – #302 43 Check greeting – #303 44 Pre-recorded*1 (Reset to pre-recorded greeting) – #304 44 #338 45 New message alert*1 Settings Outgoing call – On/Off On Outgoing call – Notification to Settings Code – Outgoing call – Remote code Activate Base unit beep On #339 45 Ring count*1 Toll saver 2-7 rings <4 rings> #211 48 Recording time*1 <3 min> 1 min Greeting only*2 #305 48 Remote code*1
Programming Sub-menu 1 Sub-menu 2 – Time adjustment*1, *3 Main menu: Settings Code Manual #226 “Speed dial” Operation Code Viewing the speed dial entry.
Programming Sub-menu 1 Sub-menu 2 Settings Code Key detector setting*6 – 1: Add new device (for Detector1)*7 – 2: Add new device (for Detector2) – 3: Add new device (for Detector3) – 4: Add new device (for Detector4) Change name*1 Detector1 #6561 Detector2*8 #6562*8 Detector3*8 #6563*8 Detector4*8 #6564*8 Registration – #6571 – – #6572*8 #6573*8 #6574*8 Deregistration – #6581 – #6582*8 #6583*8 #6584*8 Call block*1 Block a single number – Block range of numbers – #217 22 23 Blo
Programming Sub-menu 1 Sub-menu 2 – Auto talk*9 Set tel line Set dial mode*1 Set flash time*1, *10 Set line mode*1, *11 – Call sharing*1 Registration Main menu: Code On #200 17 Pulse #120 15 80 ms 90 ms 100 ms 110 ms 160 ms 200 ms 250 ms 300 ms 400 ms 600 ms <700 ms> 900 ms #121 18 A #122 – Off #194 19 Register handset – #130 39 Deregistration*2 – #131 40 Off #152 20 Display Español #110 14 Announcement*1 Español #112
Programming “Key detector”*6 Main menu: Sub-menu 1 Sub-menu 2 Settings Code Search – – Battery check – – #655 – n Base unit Main menu: W “Phonebook” Operation Code Viewing the phonebook entry. #280 Main menu: “Caller list” Operation Code Viewing the caller list.
Programming Settings Code Auto intercom Sub-menu 1 – On #273 20 Caller ID edit (Caller ID number auto edit) – Off #214 42 Change language (Display) – Español #110 14 Main menu: Sub-menu 2 “Cust. Support” Operation Code Displaying customer support Web address. #680 – *1 If you program these settings using one of the units, you do not need to program the same item using another unit. *2 This menu is not displayed when scrolling through the display menus.
Programming Alarm An alarm sounds at the set time for 1 minute and is repeated 5 times at 5 minute intervals (snooze function). A text memo can also be displayed for the alarm. A total of 3 separate alarm times can be programmed for each handset. You can set one of 3 different alarm options (once, daily, or weekly) for each alarm time. Important: R Make sure the unit’s date and time setting is correct (page 14). Handset 1 2 3 MMENUN#720 MbN: Select the desired alarm.
Programming 3 4 5 6 7 Enter the desired hour and minute you wish to start this feature. *: Select “AM” or “PM”. a MOKN Enter the desired hour and minute you wish to end this feature. *: Select “AM” or “PM”. MSAVEN a MOFFN Base unit 1 2 3 4 5 6 7 MMENUN#238 MbN: Select the desired setting. a MSAVEN R If you select “Off”, press MEXITN to exit. Enter the desired hour and minute you wish to start this feature. MAM/PMN: Select “AM” or “PM”.
Programming 6 Handset 1 2 3 MMENUN#268 MbN: “On” a MSELECTN MbN: Select the desired unit’s number to monitor with. a MSAVEN R “Baby monitor” will be displayed. R The registered unit’s name/number is displayed. Note: R When this feature is on, another handset or the base unit can hear the monitored handset by making an intercom call. To monitor from outside If you enable this feature, the unit will call a pre-programmed phone number when the handset detects sound.
Programming Baby monitor sensitivity You can adjust the sensitivity of the baby monitor. Increase or decrease the sensitivity to adjust the sound level needed to trigger the baby monitor feature. R This feature cannot be set during a monitoring call. Handset 1 Press MMENUN on the handset being monitored. 2 MbN: “Sensitivity level” a MSELECTN 3 MbN: Select the desired setting. a MSAVEN a MOFFN Other programming Changing the handset name The default handset name is “Handset 1” to “Handset 6”.
Programming is not registered to the base unit, re-register the handset. 1 Handset: MMENUN#130 2 Base unit: Press and hold MLOCATORN for about 5 seconds. R If all registered handsets start ringing, press MLOCATORN again to stop, then repeat this step. 3 Handset: Press MOKN, then wait until a long beep sounds. Deregistering a handset A handset can cancel its own registration to the base unit, or other handsets registered to the same base unit.
Caller ID Service Using Caller ID service Important: R This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. Contact your phone service provider for details. Phonebook name display When caller information is received and it matches a phone number stored in the phonebook, the stored name in the phonebook is displayed and logged in the caller list.
Caller ID Service Base unit: MCIDN 2 Press MCN to search from the most recent call, or MDN to search from the oldest call. 3 Proceed with the operation for your unit. Handset: – To call back, press M N. – To exit, press MOFFN. Base unit: – To call back, press MZN. – To exit, press MEXITN. Note for handset and base unit: R If the entry has already been viewed or answered, “ ” is displayed.
Answering System Answering system The answering system can answer and record calls for you when you are unavailable to answer the phone. You can also set the unit to play a greeting message but not to record caller messages by selecting “Greeting only” as the recording time setting (page 48). Important: R Make sure the unit’s date and time setting is correct (page 14). Memory capacity (including your greeting message) The total recording capacity is about 17 minutes.
Answering System Resetting to a pre-recorded greeting message Use this procedure to erase your greeting message and use a pre-recorded one. Key Operation MDN or MCN Adjust the speaker volume MMENUN#304 M N Repeat message*1 MYESN a MOFFN M N Skip message M N (STOP) Handset 1 2 Playing back the greeting message MERASEN *1 Handset 1 2 Operating the answering system during playback MMENUN#303 To exit, press MOFFN.
Answering System 3 Key Operation MDN or MCN Adjust the receiver/speaker volume (during playback) 1 or MFN Repeat message (during playback)*1 Erasing all messages 2 or MEN Skip message (during playback) 1 2 Press MEDITN repeatedly until the phone number is shown in the desired format N (page 42).
Answering System Storing a phone number to which the unit makes an alert call Handset n From the phonebook: 1 MMENUN#338 2 3 4 MbN: “Notification to” a MSELECTN a MADDN 3 4 5 MbN: “Notification to” a MSELECTN a MADDN MbN: “Manual” a MSELECTN Enter the desired name (16 characters max.). a MOKN Enter the desired number (24 digits max.). a MOKN a MSELECTN a MOFFN Turning on/off the new message alert setting Handset 1 2 3 MMENUN#338 MbN: “On/Off” a MSELECTN MbN: Select the desired setting.
Answering System Note: R Within 10 seconds after listening to new messages, you can press #9 during the call to turn off the new message alert by a call feature. R Even if the unit makes a new message alert call, the handset redial list does not show the record. However, on the base unit redial list it is shown as “Message alert”. Remote operation Using a touch-tone phone, you can call your phone number from outside and access the unit to listen to messages or change answering system settings.
Answering System *1 *2 *3 If pressed within the first 5 seconds of a message, the previous message is played. For English voice guidance only For Spanish voice guidance only Turning on the answering system remotely 1 Dial your phone number from a touch-tone phone. 2 Let the phone ring 15 times. R A long beep is heard. 3 Enter your remote access code within 10 seconds after the long beep. R The greeting message is played back.
Useful Information Example: Voicemail service In addition to your unit’s answering system you may also have voicemail service from your phone service provider. Voicemail is an answering service that may be offered by your phone service provider. This service can also record calls when you are unavailable to answer the phone or when your line is busy. Messages are recorded on the phone company system and not on the unit’s answering system.
Useful Information Listening to voicemail messages When new messages have been recorded, “Voicemail msg. via phone co.”*1/ “Voicemail msg.”*2 are displayed if message indication service is available. *1 Handset *2 Base unit Handset 1 MMENUN#330 R The speakerphone turns on. 2 3 Follow the pre-recorded instructions. When finished, hang up. Wall mounting The base unit can be mounted on a wall by revolving the bracket to “WALL”position (default: “DESK” stand position).
Useful Information 1 83 mm (3 1/4 inches) 2 102 mm (4 inches) Charger Fit the slots of the unit onto the corresponding wall phone plate tabs for (3) and (4) respectively. Drive the screws (1) (not supplied) into the wall. 2 27.2 mm (1 1/16 inches) 2 3 1 4 3 1 4 2 To stand on a desk Turn the bracket 180 degrees clockwise from the “WALL” position to the “DESK” direction until a click is heard. For assistance, please visit http://shop.panasonic.com/support TGF54xUSA_(en)_1201_ver031.
Useful Information Error messages Display message Cause/solution Ask phone company for VM access # R You have not stored the voicemail access number. Store the number (page 49). Main unit no power or No link. Reconnect base AC adaptor. or No link. R Confirm the base unit’s AC adaptor is connected to the unit and the power outlet correctly. R The handset has lost communication with the base unit. Move closer to the base unit and try again. R Unplug the base unit’s AC adaptor to reset the unit.
Useful Information Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset, and then insert them into the handset again. General use Problem Cause/solution The handset does not turn on even after installing charged batteries. R Place the handset on the base unit or charger to turn on the handset. The unit does not work.
Useful Information Problem Cause/solution I fully charged the batteries, but – still flashes, – is displayed, or – the operating time seems to be shorter. R Clean the battery ends ( , ) and the charge contacts with a dry cloth and charge again. R It is time to replace the batteries (page 10). Making/answering calls, intercom Problem Cause/solution R The handset is too far from the base unit. Move closer. R The base unit’s AC adaptor is not properly connected. Reconnect AC adaptor to the base unit.
Useful Information Caller ID/Talking Caller ID Problem Cause/solution Caller information is not displayed. R You must subscribe to Caller ID service. Contact your phone service provider for details. R If your unit is connected to any additional telephone equipment such as a Caller ID box or cordless telephone line jack, plug the unit directly into the wall jack. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack.
Useful Information Answering system Problem Cause/solution The unit does not record new messages. R The answering system is turned off. Turn it on (page 43). R The message memory is full. Erase unnecessary messages (page 44, 45). R The recording time is set to “Greeting only”. Change the setting (page 48). R Your phone service provider’s voicemail service may be answering your calls before the unit’s answering system can answer your calls.
Useful Information Liquid damage Problem Cause/solution Liquid or other form of moisture has entered the handset/base unit. R Disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorized service center.
Useful Information FCC and other information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------. If requested, this number must be provided to the telephone company. L Registration No.............(found on the bottom of the unit) L Ringer Equivalence No. (REN).......0.
Useful Information manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices. WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS: 1) Remain on the line and briefly explain to the dispatcher the reason for the call. 2) Perform such activities in the off-peak hours, such as early morning or late evenings. This device complies with Part 15 of the FCC Rules.
Useful Information Compliance with TIA-1083 standard: Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants. Compatible with Hearing Aid T-Coil T TIA-1083 60 For assistance, please visit http://shop.panasonic.com/support TGF54xUSA_(en)_1201_ver031.
Guía Rápida Española Guía Rápida Española Conexiones Unidad base 1 Conecte el adaptador de corriente alterna a la unidad presionándolo firmemente. 2 Enganche el cable para fijarlo. 3 Conecte el adaptador de corriente alterna a la toma de corriente. 4 Conecte el cable de la línea telefónica a la unidad, y después a la toma telefónica de una sola línea (RJ11C) hasta que escuche un clic. 5 Se requiere un filtro DSL/ADSL (no incluido) si tiene este tipo de servicio.
Guía Rápida Española Instalación y carga de la batería Cargue aproximadamente durante 7 horas. 4 2 2 3 1 1 Nota: L UTILICE SOLO baterías recargables de Ni-MH tamaño AAA (R03) ( 1 ). L NO utilice baterías alcalinas, de manganeso ni de Ni-Cd. L Confirme que las polaridades estén correctas (S, T). L Cambie el idioma de la pantalla. L Confirme que aparezca “Cargando” ( 2 ). Retire la batería 1 2 62 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés) TGF54xUSA_(en)_1201_ver031.
Guía Rápida Española Sugerencias de operación Teclas de función Al oprimir una tecla de función, puede seleccionar la función que aparece directamente encima de ella en la pantalla. Preste atención a la pantalla para ver qué funciones están asignadas a las teclas de función durante la operación. Auricular Tecla navegadora Auricular: − {^}, {V}, {<}, o {>}: Navegue por diversas listas y elementos. − VOL. (Volumen: {^} o {V}): Ajuste el volumen del receptor o el altavoz mientras habla.
Guía Rápida Española Cómo grabar el mensaje de saludo del contestador de llamadas (Auricular) Puede grabar su propio mensaje de saludo en lugar de usar uno pregrabado. 1 2 3 {MENU}(3)2 s {r}: “Sí” s {SELEC.} Después de que se emita un pitido, sostenga el auricular a una distancia aproximada de 20 cm (8 pulgadas) y hable con claridad en el micrófono (máx. de 2 minutos). Oprima {PARAR} para dejar de grabar.
Guía Rápida Española Operaciones básicas Sistema contestador de llamadas (Unidad base) Contestador encendido/ apagado Oprima {ANSWER ON/OFF} para encender y apagar el contestador de llamadas. Para escuchar mensajes {P} (PLAY) Sistema contestador de llamadas (Auricular) Para escuchar mensajes Para escuchar mensajes nuevos: {REPROD.
Appendix Customer services Shop Accessories! for all your Panasonic gear Go to hp://shop.panasonic.com/support Get everything you need to get the most out of your Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Baeries, Backup Chargers & more… Customer Services Directory For Product Informa!on, Opera!ng Assistance, Parts, Owner’s Manuals, Dealer and Service info go to hp://shop.panasonic.
Appendix Limited Warranty (ONLY FOR U.S.A.
Appendix Limited Warranty Limits and Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
Index Index # A B C D E F 3-way conference: 19 Additional handset: 39 Alarm: 36 Answering calls: 17 Answering system Call screening: 48 Erasing messages: 44, 45, 47 Greeting message: 43 Greeting only: 48 Listening to messages: 44, 47 New message alerting: 45 Number of rings: 48 Recording time: 48 Remote access code: 47 Remote operation: 47 Ring count: 48 Toll saver: 48 Turning on/off: 43 Auto intercom: 20 Auto talk: 17, 33 Baby monitor: 37 Battery: 10, 11 Booster (Clarity booster): 18 Call block: 22
Notes 70 TGF54xUSA_(en)_1201_ver031.
Notes 71 TGF54xUSA_(en)_1201_ver031.
IMPORTANT! If your product is not working properly. . . 1 Reconnect AC adaptor to the base unit. 2 Check if telephone line cord is connected. 3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.) 4 Read troubleshooting page in the Operating Instructions. Visit our Web site: http://shop.panasonic.com/support L FAQ and troubleshooting hints are available.
