Installation Manual Additional Digital Cordless Handset Model No. KX-TGDA30E Thank you for purchasing a Panasonic product. This unit is an additional handset compatible with the following series of Panasonic Digital Cordless Phone: - KX-TGD310/KX-TGD320/KX-TGK310/KX-TGK320 (The corresponding models are subject to change without notice.) You must register this handset with your base unit before it can be used. This installation manual describes only the steps needed to register and begin using the handset.
Installation Accessory information Supplied accessories Accessory item/Part number Quantity Charger*1 1 AC adaptor/PNLV233EKZ 1 Rechargeable batteries*2 2 Handset cover*3 1 *1 *2 *3 PNLC1064ZB (Black), PNLC1064ZG (Carbon Grey & Black) Please read the base unit’s operating instructions for replacement battery information. The handset cover comes attached to the handset. Note: R Please read the base unit’s operating instructions for additional/replacement accessories.
Installation Setting up Connections Connect the AC adaptor plug to the unit until you hear a click. Connect the AC adaptor to the power outlet. 1 2 Note: R Use only the supplied Panasonic AC adaptor PNLV233E. R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) Battery installation/Battery charging Important: R Use the supplied rechargeable batteries.
Installation 1 2 Note: R The handset display may show “Please wait for 1 minute.” when the handset is placed on the charger if it is not registered to the base unit. R If the batteries are fully charged, but the operating time seems to be shorter, clean the battery ends ( , ) and the charge contacts with a dry cloth and charge again. Registering the handset to the base unit Ensure that the handset is switched on. If it is not on, press and hold MOFFN for few seconds to turn the handset on.
Installation For your safety To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth.
Installation may cause the batteries and/or the conductive material to overheat and cause burns. R Charge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual. R Only use a compatible base unit (or charger) to charge the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode.
Installation Information for Users on Collection and Disposal of Old Equipment and used Batteries 1 2 3 These symbols (A, B, C) on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.
Installation Sales and support information Customer Communications Centre R For customers within the U.K.: 0844 844 3899 R For customers within Ireland: 01289 8333 R For further support on your product, please visit our website: www.panasonic.co.uk Direct Sales at Panasonic U.K. R Order accessory and consumable items for your product with ease and confidence by phoning our Customer Communications Centre Monday - Friday 9:00am - 5:00pm (Excluding public holidays).
Notes 9 TGDA30E(en-en)_1225_ver021.
Sales Department: Panasonic House, Willoughby Road, Bracknell, Berkshire, RG12 8FP 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan © Panasonic System Networks Co., Ltd. 2014 *PNQX6830ZA* *PNQX6830ZA* PNQX6830ZA TGDA30E(en-en)_1225_ver021.
