Installation Manual Additional Rugged Cordless Handset Model No. KX-TGTA61 Link2Cell Cordless Telephone with Digital Answering Machine j Rugged Handset Model No. KX-TGD583 KX-TGD584 KX-TGD585 KX-TGE484 Model shown is TGTA61 Thank you for purchasing a Panasonic product. This installation manual describes only the steps needed to register and begin using the handset. Please read the base unit’s operating instructions for further details.
Table of Contents Installation Accessory information ..................................3 For KX-TGD583/KX-TGD584/KX-TGD585 users ............................................................4 For KX-TGE484 users ..................................5 Important Information For your safety .............................................6 Important safety instructions ........................7 Other information .........................................7 Getting Started Setting up ..................................
Installation Accessory information Supplied accessories Accessory item/Part number Quantity Charger/PNLC1083ZB 1 Rechargeable batteries*1 2 Handset cover*2/PNYNAGTA61BR 1 Belt clip*3/PNZMAGTA61BR 1 *1 *2 *3 See page 3 for replacement battery information. The handset cover comes attached to the handset. The belt clip comes attached to the handset. Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 19).
Installation For KX-TGD583/KX-TGD584/KX-TGD585 users For details about the operations, refer to the enclosed base unit’s operating instructions. Note: R Some features of KX-TGTA61 are slightly different from the descriptions in the base unit’s operating instructions (page 12). Model composition Series Model No. KX-TGD560 series KX-TGD583 KX-TGD584 KX-TGD585 Base unit Handset Part No. Part No.
Installation For KX-TGE484 users For details about the operations, refer to the enclosed base unit’s operating instructions. Note: R Some features of KX-TGTA61 are slightly different from the descriptions in the base unit’s operating instructions (page 12). Model composition Series Model No. KX-TGE470 series KX-TGE484 Base unit Handset Part No. Part No.
Important Information Ni-MH rechargeable batteries (supplied) For your safety To prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. R Regularly remove any dust, etc.
Important Information R Do not use the handset in high humidity places, such as bathroom. R Since water in headset jack may cause damage, close the headset jack cover completely when the optional headset is not in use. When the optional headset is connected, do not use the handset with wet hands. R If the handset is wet, wipe with a soft dry cloth. R The charger is not designed to be waterproof. Do not place near the water. Also do not place the handset on the charger if the handset is wet.
Getting Started Locking Unlocking Setting up Connections/Wall mounting Connect the AC adaptor to the power outlet. Drive the screws (1) (not supplied) into the wall, if necessary. 2 27.2 mm (1 1/16 inches) 2 2 1 1 1 4 Note: R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) R Make sure that the wall and the fixing method are strong enough to support the weight of the unit.
Getting Started Removing the battery Ni-MH battery performance (supplied batteries) Operation 1 2 Operating time In continuous use 8.5 hours max.*1 Not in use (standby) 4 days max.*1 *1 If eco mode is on except when using link to cell function and flash light. Note: R Actual battery performance depends on usage and ambient environment. Battery charging Charge for about 7 hours. R Confirm “Charging” is displayed (1). R When the batteries are fully charged, “Fully charged” is displayed.
Getting Started Controls Handset E MZN (SP-PHONE: Speakerphone) F MTALKN G Dial keypad *: Temporary tone dialing 0: ( ) Ringer off R You can turn the ringer on/off by pressing and holding [0] ( ) until the unit beeps. H Microphone I Receiver J Display K MLIGHTN R Press MLIGHTN to turn the flashlight on/off. The maximum lightning time is about 5 minutes. A I J B C K D L E F M G H N A A B A Flashlight B Speaker R The speaker is located behind the belt clip.
Getting Started Handset key print For the following functions, the key prints may different for your original handset and KX-TGTA61. Function Your original handset KX-TGTA61 Flash MFLASHN MFLASHN/M N Call waiting MCALL WAITN MFLASHN/M N Display icons Handset display items Item Meaning Within base unit range Out of base unit range The line is in use. R When flashing: The call is put on hold. R When flashing rapidly: An incoming call is now being received. Eco mode is on. Noise reduction is set.
Feature differences Feature differences between your original handset and KX-TGTA61 n Following functions or operations may be different between your original handset and KX-TGTA61. Available for models with a base unit that supports the functions. – Call block (page 12) – Automated call block (page 13) – Intercom, Transferring calls, conference calls (page 14) – Power backup operation (This handset is not compatible.) – Message indicator (This handset is not compatible.
Feature differences Adding call blocked numbers from the caller list Please change the operating procedure in step 3 instead of pressing MCALL BLOCKN n When a cellular phone is not paired: MMENUN a MbN: “Save call block” a MSELECTN n When a cellular phone is paired: MSELECTN a MSAVEN a MbN: “Call block” a MSELECTN Differences in call block operations You need to access the following features by using the direct command code or scrolling through the display menu instead of pressing the MCALL BLOCKN button,
Feature differences Intercom, Transferring calls, Conference calls There is no MINTERCOMN button on KX-TGTA61 and you need to change the operating procedure instead of pressing MINTERCOMN. 1 MMENUN a MbN: “Intercom” a MSELECTN 2 MbN: Select the desired unit. a MSELECTN 4 Press MOKN to exit. Note: R The setting you made is kept for each line (landline and cellular lines). R Depending on the condition and quality of your telephone line, this feature may emphasize existing line noise.
Feature differences Important: R Before using this feature, we recommend that you test this feature and adjust the baby monitor sensitivity as needed, especially if you plan to monitor from outside. R This feature should not be used as a substitute for a medical or caregiver’s supervision. It is the caregiver’s responsibility to stay close enough to handle any eventuality. Note: R If the unit is connected to a PBX system, you cannot set the baby monitor.
Feature differences Turning off the baby monitor The monitored handset cannot be used while baby monitor is set to “On”. 1 Press MMENUN on the handset being monitored. 2 3 MbN: “On/Off” a MSELECTN MbN: “Off” a MSELECTN a MOFFN Editing an outside monitoring number 1 2 3 4 5 6 7 Press MMENUN on the handset being monitored. MbN: “On/Off” a MSELECTN MbN: “On” a MSELECTN MbN: Select the outside line. MMENUN a MbN: “Edit” a MSELECTN Edit the name if necessary. a MOKN Edit the phone number if necessary.
Feature differences 3 MbN: Select the desired alarm option. a MSELECTN “Off” Turns alarm off. Go to step 10. “Once” An alarm sounds once at the set time. “Daily” An alarm sounds daily at the set time. Go to step 5. “Weekly” Alarm sounds weekly at the set time(s). 4 Proceed with the operation according to your selection in step 3. n Once: Enter the desired month and date. a MOKN n Weekly: MbN: Select the desired day of the week and press MSELECTN. a MOKN 5 6 7 Set the desired time.
Appendix FCC and other information This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316. When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone.
Appendix Customer services Shop Accessories! for all your Panasonic gear Go to hp://shop.panasonic.com/support Get everything you need to get the most out of your Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Baeries, Backup Chargers & more… Customer Services Directory For Product Informa!on, Opera!ng Assistance, Parts, Owner’s Manuals, Dealer and Service info go to hp://shop.panasonic.
Appendix Limited Warranty (ONLY FOR U.S.A.
Appendix Limited Warranty Limits and Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
Appendix IMPORTANT! If your product is not working properly. . . 1 Reconnect AC adaptor to the base unit. 2 Check if telephone line cord is connected. 3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.) 4 Read troubleshooting page in the Operating Instructions. Visit our Web site: http://shop.panasonic.com/support L FAQ and troubleshooting hints are available.
Notes 23 TGTA61(en)_0731_ver110.
TGTA61(es-es)_0619_ver032.
Pasos iniciales # a MbN: Seleccione el idioma deseado. a MOKN Símbolo en teclas del auricular Para las siguientes funciones, las teclas son diferentes para el auricular original y KX-TGTA61. MCALL WAITN Llamada en espera MFLASHN Flash Su auricular original Función KX-TGTA61 N MFLASHN/M N MFLASHN/M Iconos de la pantalla Elementos de la pantalla del auricular Artículos Significado Dentro del alcance de la unidad base Fuera del alcance de la unidad base La línea se está usando.
2 MbN: Seleccione la configuración deseada. a MGUARDARN a MOFFN Controles C D Pasos iniciales G MTALKN F MZN (SP-PHONE: Altavoz) E Toma para audífono D Auricular C Linterna A MLUZN R Oprima MLUZN para encender o apagar la linterna. El tiempo máximo de iluminación es de 5 minutos.
Pasos iniciales Extracción de la batería 1 2 Rendimiento de las baterías Ni-MH recargables (baterías que se suministran) 4 días máx.*1 Mientras no esté en uso (en espera) 8.5 horas máx.*1 En uso continuo Tiempo de funcionamiento Operación *1 Si el modo ecológico está encendido, excepto cuando se usan las funciones de enlace a celular y de linterna. Cómo registrar un auricular a una unidad base Cargue aproximadamente durante 7 horas. R Confirme que se muestre “Cargando” (1).
Bloquear Pasos iniciales Desbloquear Instalación Conexiones/Montaje en la pared Conecte el adaptador de corriente a la toma de corriente. Si lo requiere, inserte los tornillos (1) (no se suministran) en la pared. 2 27.2 mm (1 1/16 pulgadas) 2 2 1 1 1 4 Nota: R El adaptador de corriente debe permanecer conectado en todo momento (es normal que el adaptador se caliente durante su uso).
Instalación Para usuarios de KX-TGE484 Para obtener detalles sobre las operaciones, consulte el manual de instrucciones de la unidad base adjunto. Nota: R Algunas funciones de KX-TGTA61 son ligeramente diferentes a las descripciones del manual de instrucciones de la unidad base.
Instalación Para usuarios de KX-TGD583/KX-TGD584/KX-TGD585 Para obtener detalles sobre las operaciones, consulte el manual de instrucciones de la unidad base adjunto. Nota: R Algunas funciones de KX-TGTA61 son ligeramente diferentes a las descripciones del manual de instrucciones de la unidad base.
Instalación Información de los accesorios Accesorios que se suministran Accesorio/Pieza número Cantidad 1 Sujetador para cinturón*3/PNZMAGTA61BR 1 Tapa del auricular*2/PNYNAGTA61BR 2 Baterías recargables*1 1 Cargador/PNLC1083ZB *1 *2 *3 Consulte la página 2 para obtener información acerca de la batería de reemplazo. La tapa del auricular viene unida a él. El sujetador para cinturón viene unido al auricular.
Manual de instalación Auricular inalámbrico resistente adicional Modelo Nº KX-TGTA61 Teléfono inalámbrico Link2Cell con contestador de llamadas digital j auricular resistente Modelo Nº KX-TGD583 KX-TGD584 KX-TGD585 KX-TGE484 El modelo que se muestra es el TGTA61 Gracias por adquirir un producto Panasonic. Este manual de instalación solo describe los pasos necesarios para registrar y comenzar a usar el auricular.
