Operating Instructions Digital Cordless Phone Model No. KX-TGB110E KX-TGB112E KX-TGB113E Model shown is KX-TGB110 Before initial use, see “Getting Started” on page 11. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. KX-TGB113E_151216.
Table of Contents Introduction Caller ID and Calls list Accessory information.................... 3 Caller ID and Calls list.................... 23 General information........................ 5 Programming Important Information Clock and Alarm............................. 25 For your safety............................... 6 Personal settings............................ 25 Important safety instructions.......... 7 Base settings.................................. 26 For best performance............
Introduction Accessory information Supplied accessories Quantity No. Accessory item/Part number KX-TGB110 KX-TGB112 KX-TGB113 1 AC adaptor/PNWYB110E00 1 2 3 2 Telephone line cord/ PNJA1113Y (Black/ for U.K.) or PNJA1037Z (Transparence/for U.K.) 1 1 1 6 3 4 Rechargeable batteries*1 2 4 Handset cover*2 1 2 3 5 Charger/PNLC1068ZB - 1 2 See below for replacement battery information. The handset cover comes attached to the handset.
Introduction Other information ●● Design and specifications are subject to change without notice. ●● The illustrations in these instructions may vary slightly from the actual product. Sales and support information Customer Communications Centre ●● For customers within the U.K.: 0344 844 3899 ●● For customers within Ireland: 01289 8333 ●● For further support on your product, please visit our website: www.panasonic.co.uk Direct Sales at Panasonic U.K.
Introduction General information ●● This equipment is designed for use on the U.K. and Ireland analogue telephone network. ●● In the event of problems, you should contact your equipment supplier in the first instance. Declaration of Conformity: ●● Panasonic Corporation declares that the radio equipment type (KXTGB110/KX-TGB112/KX-TGB113) is in compliance with Directive 2014/53/ EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.ptc.panasonic.
Important Information For your safety To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection ●● Use only the power source marked on the product. ●● Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. ●● Completely insert the AC adaptor/ power plug into the power outlet.
Important Information shielded from external RF (radio frequency) energy. (The product operates in the frequency range of 1881.792 to 1897.344MHz, and the RF transmission power is 250 mW (max.).) ●● Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
Important Information be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4.
Important Information than 0 °C or greater than 40 °C. Damp basements should also be avoided. ●● The maximum calling distance may be shortened when the product is used in the following places: Near obstacles such as hills, tunnels, underground, near metal objects such as wire fences, etc. ●● Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. Routine care ●● Wipe the outer surface of the product with a soft moist cloth.
Important Information For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. Information on Disposal in other Countries outside the European Union These symbols ( 1 , 2 , 3 ) are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.
Getting Started Setting up Connections ■■Base unit Connect the AC adaptor plug to the unit until you hear a click. Connect the AC adaptor to the power outlet. Connect the telephone line cord to the unit, then to the telephone line jack until you hear a click. A DSL/ADSL filter (not supplied) is required if you have a DSL/ ADSL service. Note: ●● Use only the supplied Panasonic AC adaptor S003AIB0600040. ●● Use only the supplied telephone line cord. Connect the AC adaptor to the power outlet.
Getting Started Battery charging During a power failure Charge for at least 7 hours. The unit will not work during a power failure. We recommend connecting a corded-type telephone (without AC adaptor) to the same telephone line or to the same telephone line jack using a T-adaptor. Your Panasonic sales shop can offer you more information about connection possibilities.
Getting Started Panasonic Ni-MH battery performance (supplied batteries) Operation Operating time In continuous use 10 hours max.*1 Not in use (standby) 200 hours max.*1 *1 If eco mode is off. Note: ●● Actual battery performance depends on usage and ambient environment. Date and time 1 d “CLOCK/ m, ALARM”, press m . L R L R L R 2 “DATE & TIME”. 3 m to select. 4 Enter the date using the keypad L R (e.g. 12--08--15 for 12th of August 2015), press m to confirm.
Getting Started 1 2 Controls Handset 3 1 4 9 10 5 6 7 2 3 11 4 12 13 5 6 14 7 15 8 16 17 14 KX-TGB113E_151216.indd 14 8 9 10 11 Speaker Up During a call, press to increase earpiece volume, page 17. When the phone is ringing, press to increase the handset ringer volume, page 17. Press to scroll through the menu options, redial list, calls list and phonebook entries. Menu/OK/Mute Press to open the Menu. Press to select menu options and to confirm a displayed option.
Getting Started 12 13 14 15 16 17 End Call/Exit/Handset on/off Press to end a call. When viewing the redial / calls list / phonebook or when in the menu, press to exit and return to standby. Press and hold for about 2 seconds to switch the handset on. Press and hold for about 5 seconds to switch the handset off. Down/Calls list During a call, press to decrease earpiece volume, page 17. When the phone is ringing, press to decrease the handset ringer volume, page 17.
Getting Started Signal icon Steady when registered and in range. Flashes when out of range of the base or searching for the base.* Eco mode is ON handset will automatically reconnect.
Making/Answering Calls Making calls 1 t. 2 When there is a dial tone, dial the L R phone number. 3 When you finish talking, press e or place the handset on the base unit or charger. L R OR 1 Lift the handset and dial the phone number. ●● To correct a digit, press L R When an external call is received, the phone rings and icon flashes on the display. 1 Lift the handset, press t when the unit rings. Note: ●● When “BUSY” is displayed, another handset is in use. Wait and try again later.
Making/Answering Calls For call waiting or Call Waiting Caller ID service users To use call waiting or Call Waiting Caller ID, you must first subscribe with your service provider/telephone company. This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a call waiting tone.
Making/Answering Calls other handset rings automatically. 2 If 3 or more handsets are registered to the base, press to select the I handset that is to be called, press t. L R L R d L R 3 Once the second handset answers, press and hold join all 3 callers. 4 Press e L m L R to to end the call. R 5 m L to confirm or R p L R to cancel. Copy a Redial list number to the phonebook 1 2 r. L R : Select the desired phone number. LsR 3 m . “SAVE NUMBER". 4 m . “ENTER NAME”.
Making/Answering Calls Handset locator The handset locator can be used to alert a handset user that they are wanted or locate a missing handset. Locator calls cannot be answered by a handset. 1 p on the rear of the base. All handsets registered to the base will ring. L R 2 To stop the ringing, p or press any button except f , r , and I on the handset. L L L R R L R R 20 KX-TGB113E_151216.indd 20 Helpline Tel. No.: U.K.
Phonebook View or dial an entry Phonebook The phonebook can store up to 50 names and numbers. Names can be up to 12 characters long and numbers up to 24 digits. 1 2 Store a name and number When subscribed to Caller ID, to display the name of the caller instead of the number, save the full telephone number including the area code to the phonebook. Multiple entries can be stored with the same name. However, to prevent unnecessary duplicated entries, the number can be stored only once. 1 m . “PHONEBOOK”.
Phonebook Delete an entry 1 2 3 m . “PHONEBOOK”. d “DELETE”, press m, m. L R L R L R L R : To select the entry that needs to be deleted, or search alphabetically, press m . LsR L 4 m L to confirm or R R p L R to cancel. Delete all entries 1 2 m . “PHONEBOOK”. d “DELETE ALL”, m, press m . m to confirm or p to cancel. L R L R L L 3 L R R R L R Store a quickdial number Your phone can store 2 quickdial numbers for key 1 and 2.
Caller ID and Calls list Caller ID and Calls list IMPORTANT To use Caller ID, first subscribe to the service from the network provider. A subscription fee may be payable. To ensure that the caller’s name is displayed, make sure the full telephone number, including the area code is stored in the phonebook. If the caller’s number is stored in the phonebook, the name assigned to it will be displayed. If the number is unavailable, “UNKNOWN” will be displayed.
Caller ID and Calls list Delete an entry 1 2 3 4 5 d L R to open the Calls list. s : To the required entry. L R d “DELETE”. m, m , “CONFIRM ?”. m to confirm or p to cancel. L R L R L R L R L R Delete the entire Calls list 1 2 3 4 d L R to open the Calls list. d “DELETE ALL”. m, m , “CONFIRM ?”. m to confirm or p to cancel. L R L R L R 24 KX-TGB113E_151216.indd 24 L R L R Helpline Tel. No.: U.K.
Programming Clock and Alarm Personal settings Setting the date and time Handset ringer volume If you have subscribed to Caller ID Service, the date and time will be set on your handset whenever a call is received. You can also manually set the date and time. 1 m, “CLOCK/ ALARM”, press m . The handset ring volume can be set to different volume level. Choose from 5 volume levels or Off. 1 m, “PERSONAL SET”, press m . L d R L R L R 2 “DATE & TIME”. 3 m to select.
Programming Key tones 1 d m, SET”, press L R 3 4 “PERSONAL m. L R L R 2 “HANDSET TONE”, press m . 3 : Select “KEY TONE”, press L R LsR m. L 4 5 : Select “ON” or “OFF”. m to confirm or p to return to the previous menu. L R L R Handset name A personalized name can be set for each handset to easily distinguish between them. A name can be up to 10 characters long. 1 m, “PERSONAL SET”, press m . L d R L R L 2 d R “HANDSET NAME”, press m.
Programming activate the unit and it will revert back to the normal mode. This feature is set to OFF by default. 1 m, “ADVANCED SET”, press m . L d R L R L 2 3 4 d L R “ZERO EMIT”, press R m. L R m to confirm or p to return to the previous menu. L R L R Auto Prefix You can set the phone to detect a dialling number and replace it with another number. The number to be detected can be up to 5 digits long. It can be replaced with a number up to 10 digits. 1 m, “ADVANCED SET”, press m .
Programming Registering a handset De-register a handset Note: Handset batteries must be fully charged before registration. Hold the handset close to the base during the registration process. Handsets that were supplied with the base are already pre-registered. Available for: KX-TGB112/ KX-TGB113 Use one handset to de-register another. The handset being used cannot de-register itself. 1 m, “ADVANCED SET”, press m . On the base: 2 “UNREGISTER”, press m .
Programming Note: Once reset the handset will prompt you to reset the date and time, see page 25. Default settings by reset Key tone Auto answer Ringer melody Ringer volume Receiver volume Language Phonebook Calls list Redial list PIN code Eco mode Zero Emit Handset name Auto Prefix Recall Time KX-TGB113E_151216.indd 29 ON OFF 5 5 3 ENGLISH Unchanged Empty Empty 0000 OFF OFF HANDSET EMPTY MEDIUM Helpline Tel. No.: U.K.
Useful Information Troubleshooting Voicemail Voicemail is an automatic answering service offered by your service provider/telephone company. After you subscribe to the service, your service provider/telephone company’s voicemail system answers calls for you when you are unavailable to answer the phone or when your line is busy. Messages are recorded by your service provider/telephone company, not your telephone.
Useful Information ●● Check that the mains power is connected properly and switched on. Keypad does not seem to work ●● Check that the keypad lock is not on, see page 19. icon is not scrolling during charge ●● Adjust the handset slightly on the base. ●● Clean the charging contacts with a cloth moistened with alcohol. ●● Check that the mains power is connected properly and switched on. ●● The battery is full. When the icon handset is fully charged, will appear steadily on the display.
Useful Information Conditions of guarantee This guarantee is in addition to and does not in any way affect any statutory or other rights of consumer purchasers. If within the applicable guarantee period, the product proves to be defective by reason of faulty design, workmanship or materials, we undertake subject to the following conditions to have the defective product (or any part or parts there of) repaired or replaced free of charge. 1.
Index Index A Alarm: 25 Answering calls: 17 Auto answer: 26 I Intercom: 18 K Keypad lock: 19 Key tones: 26 L Language: 26 M Making calls: 17 Menu Map: 16 Auto Prefix: 27 B Base unit controls: 15 Battery: 3, 7 Mute: 17 P Phonebook: 21 Battery charging: 12 PIN code: 27 Battery installation: 11, 12 Battery level: 12 Battery performance: 13 C Caller ID and Calls list: 23 Power failure: 12 Q Quickdial number: 22 R Recall: 17, 27 Receiver volume: 17 Call Waiting Caller ID: 18 Redial C
Notes 34 KX-TGB113E_151216.
KX-TGB113E_151216.
IMPORTANT! If your product is not working properly. . . 1 Reconnect AC adaptor to the base unit. 2 Check if telephone line cord is connected. 3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.) 4 Read troubleshooting page in the Operating Instructions. If you still have any problems, please call the Panasonic DECT Helpline 0344 844 3899 (U.K.) 01289 8333 (Ireland) or contact us through our website: www.panasonic.co.
