Operating instructions

4 Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
– We recommend using the Panasonic rechargeable batteries noted
in the base unit’s operating instructions for replacement battery
information.
1 Firmly press the notch on the handset cover and slide it in the
direction of the arrow.
2 Insert the batteries negative (T) end first. Close the handset cover.
3 Place the handset on the charger for about 7 hours before initial
use.
Note:
LThe handset display may show “Please Wait...” when the
handset is placed on the charger if it is not registered to the base unit.
LIf the batteries are fully charged, but the operating time seems to be
shorter, clean the battery ends (S, T) and the charge contacts with a
dry cloth and charge again.
Registering the handset to the base unit
Ensure that the handset is switched on. If it is not on, press and hold
{ih} for few seconds to turn the handset on.
1 Handset:
Lift the handset and press {ih}.
2 Base unit:
Press and hold {x} for about 5 seconds, until the registration tone
sounds.
LIf all registered handsets start ringing, press the same button to
stop. Then repeat this step.
TGA830E(e).fm Page 4 Thursday, February 14, 2008 10:50 AM