Operating instructions

5 Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Registering the handset to the base unit
Ensure that the handset is switched on. If it is not on, press and hold
{ic} for few seconds to turn the handset on.
1 Handset:
Lift the handset and press {ic}.
2 Base unit:
Press and hold {x} for about 5 seconds, until the registration tone
sounds.
LIf all registered handsets start ringing, press the same button to
stop. Then repeat this step.
3 Handset:
Place the handset on the base unit.
LContinue the operation even when the handset display shows
“Please wait for 1 minute.”.
4 With the handset still on the base unit, wait until a confirmation tone
sounds and w is displayed.
5 Handset:
Lift the handset.
L“Set Date/Time” is displayed.
If the date and time has already been set:
Press {ic} to exit.
If you want to correct the date and time:
Press M. i Enter the current date, month, and year. i M i
Enter the current hour and minute. i M i {ic}
Note:
LIf an error tone sounds, or if _ is displayed, register the handset
according to the base unit’s operating instructions.
TGA659E(e).fm Page 5 Friday, August 20, 2010 9:16 AM