TG934x_QG(e).fm Page 1 Wednesday, December 5, 2007 10:12 AM Model No. KX-TG9331/KX-TG9332 KX-TG9333/KX-TG9334 KX-TG9341/KX-TG9342 KX-TG9343/KX-TG9344 Quick Guide Setting up Base unit L Use only the supplied Panasonic AC adaptor PQLV207. L Use only the supplied telephone line cord. CHARGE FOR ABOUT 7 HOURS “Click” To single-line telephone jack (RJ11C) Press plug firmly. DSL/ADSL filter (For DSL/ADSL service users) (120 V AC, 60 Hz) Hook Handset L USE ONLY Ni-MH batteries AAA (R03) size.
TG934x_QG(e).fm Page 2 Wednesday, December 5, 2007 10:12 AM Operating tips Using the navigator key The handset navigator key can be used to navigate through menus and to select items shown on the display by pressing {^}, {V}, {<}, or {>}. To adjust the receiver or speaker volume, press {^} to increase the volume, or press {V} to decrease the volume repeatedly while talking. Volume up {^} {<} {>} {V} Volume down Soft keys The handset features 2 soft keys.
TG934x_QG(e).fm Page 3 Wednesday, December 5, 2007 10:12 AM Basic operations Making/Answering calls (Handset) Making calls Dial the phone number. i {C}/{s} Answering calls {C}/{s} To hang up {OFF} To adjust the receiver or speaker volume Press {^} or {V} repeatedly while talking. Making a call using the redial list {REDIAL} i {V}/{^}: Select the desired phone number. i {C} To adjust the handset ringer volume 1 {MENU} i {#}{1}{6}{0} 2 {V}/{^}: Select the desired volume.
TG934x_QG(e).fm Page 4 Wednesday, December 5, 2007 10:12 AM Frequently asked questions Question Cause/solution How can I increase the handset volume level? L Press navigator key {^} repeatedly while talking. Why is the conversation noisy or cutting off? L Try to relocate the base unit so that distance from location to use the handset will be minimized. L If the same problem occurs even if the handset is next to the base unit, send your unit for service.
TG934x_QG(e).fm Page 5 Wednesday, December 5, 2007 10:12 AM Quick troubleshooting 1 Handset shows: “No link to base. Reconnect AC adaptor.” Place the handset on the base unit, then check if “Charging” is displayed. “Charging” is not displayed. Unplug and then plug AC adaptor properly to both the base unit and AC outlet. “Charging” is displayed. “Charging” is displayed, now. “Charging” is still not displayed. Lift the handset, then try again.
TG934x_QG(e).fm Page 6 Wednesday, December 5, 2007 10:12 AM Quick troubleshooting 2 No dial tone is heard from handset. See if “Check tel Displayed line” is shown on the handset display. Not displayed Lift up the handset from the base unit or charger. Press {C} (TALK) at the handset, then check if the display shows “Talk”. 5 No link to base. Reconnect AC adaptor. Check if the telephone cord is properly connected to both the base unit and telephone line jack on the wall.
TG934x_QG(e).fm Page 7 Wednesday, December 5, 2007 10:12 AM Registering a handset to a base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, register the handset. Handset 5 {MENU} i {#}{1}{3}{0} Press LOCATOR on base for 4sec Then press OKL {MENU} Base unit Press and hold {LOCATOR} for 4 seconds until the registration tone sounds. L The next step should be completed within 90 seconds.
TG934x_QG(e).fm Page 8 Wednesday, December 5, 2007 10:12 AM IMPORTANT! If your product is not working properly. . . 1 Read this Quick Guide or Operating Instructions L If you lost the Operating Instructions, you can download a copy at http://www.panasonic.com/help 2 Visit our website: http://www.panasonic.com/help L FAQs and troubleshooting hints are available. 3 Contact us via the web at: http://www.panasonic.
