Operating Instructions

2 MbN: Select the entry to be barred. a
a
3 MbN: “Caller Barred” a
4 MbN: “Yes” a a M N
n By entering phone numbers:
1
(middle soft key) #217 a
2 Enter the phone number (24 digits
max.). a
R To erase a digit, press .
3 M
N
Viewing/editing/erasing bar call
numbers
1
(middle soft key) #217
2 MbN: Select the desired entry.
R To exit, press M
N.
3 To edit a number:
a Edit the phone number. a
a M N
To erase a number:
a MbN: “Yes” a a M N
Note:
R When editing, press the desired dial key to
add,
to erase.
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
(middle soft key) #256
2 Enter the base unit PIN (default: “0000”).
R If you forget your PIN, see page 58.
3 Select the handsets to be restricted by
pressing 1 to 6.
R All handsets registered to the base unit
are displayed.
R “ ” is displayed next to the selected
handset numbers.
R To cancel a selected handset, press
the same dial key again. “
”
disappears.
4
5 Select a memory location by pressing 1
to 6. a
6 Enter the phone number or area code to
be restricted (8 digits max.). a
a
M
N
R To erase a restricted number, press
.
Changing the base unit PIN
(Personal Identification Number)
Important:
R If you change the PIN, please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, see
page 58.
1
(middle soft key) #132
2 Enter the current 4-digit base unit PIN
(default: “0000”).
3 Enter the new 4-digit base unit PIN. a
a M N
Calendar/Schedule
You can program 20 schedule alarms for each
handset using the calendar. A schedule alarm
sounds at the set time for 1 minute. A text
memo can also be displayed for the schedule
alarm.
Important:
R Set the date and time beforehand
(page 15).
R If the unit is connected to a PBX system,
date information may not be properly
received. Set the PBX system to receive
the correct date information. Contact your
PBX supplier if necessary.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
33
Programming
TG8561E(en-en)_0420_ver101.pdf 33 2012/04/20 14:29:12