TG74xx_QG(e).fm Page 1 Thursday, November 27, 2008 5:32 PM Model No. KX-TG7431/KX-TG7432 KX-TG7433/KX-TG7434 Quick Guide Setting up Base unit L Use only the supplied Panasonic AC adaptor PQLV219. “Click” Correct Base unit (120 V AC, 60 Hz) Hook Wrong Base unit To single-line telephone jack (RJ11C) Hook Press plug firmly. “Click” DSL/ADSL filter* (Not supplied) *For DSL/ADSL service users Handset L USE ONLY Ni-MH batteries AAA (R03) size. L Do NOT use Alkaline/Manganese/Ni-Cd batteries.
TG74xx_QG(e).fm Page 2 Thursday, November 27, 2008 5:32 PM Operating tips Joystick Volume up By pushing the joystick ({^}, {V}, {<}, or {>}) repeatedly, you can: − scroll through (up, down, left, or right) various lists or items − adjust the receiver or speaker volume (up or down) while talking Volume down Soft keys The handset features 2 soft keys and a joystick. By pressing a soft key, or by pressing the center of the joystick, you can select the feature shown directly above it on the display.
TG74xx_QG(e).fm Page 3 Thursday, November 27, 2008 5:32 PM Date and time (Handset) 1 2 3 4 {MENU} (center of joystick) i {#}{1}{0}{1} Enter the current month, date, and year. i {OK} Enter the current hour and minute (12-hour clock format). {AM/PM}: Select “AM” or “PM”. i {SAVE} i {OFF} Basic operations Making/Answering calls (Handset) Making calls Dial the phone number.
TG74xx_QG(e).fm Page 4 Thursday, November 27, 2008 5:32 PM Frequently asked questions Question Cause/solution Why is _ displayed? L The handset is too far from the base unit. Move closer. L The base unit’s AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. L You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. L The handset is not registered to the base unit.
TG74xx_QG(e).fm Page 5 Thursday, November 27, 2008 5:32 PM Quick troubleshooting 1 Handset shows: “No link to base. Reconnect main base AC adaptor.” Place the handset on the base unit, then check if “Charging” is displayed. “Charging” is not displayed. Unplug and then plug AC adaptor properly to both the base unit and AC outlet. “Charging” is displayed. “Charging” is displayed, now. “Charging” is still not displayed. Lift the handset, then try again.
TG74xx_QG(e).fm Page 6 Thursday, November 27, 2008 5:32 PM Quick troubleshooting 2 No dial tone is heard from handset. See if “Check tel Displayed line” is shown on the handset display. Not displayed Lift up the handset from the base unit or charger. Press {C} at the handset, then check if the display shows “Talk”. No link to base. Reconnect main base AC adaptor. Check if the telephone cord is properly connected to both the base unit and telephone line jack on the wall.
TG74xx_QG(e).fm Page 7 Thursday, November 27, 2008 5:32 PM Registering a handset to a base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. Handset {MENU} (center of joystick) i {#}{1}{3}{0} {MENU} Base unit Press and hold {LOCATOR} for about 4 seconds until the registration tone sounds. L The next step must be completed within 90 seconds.
TG74xx_QG(e).fm Page 8 Thursday, November 27, 2008 5:32 PM IMPORTANT! If your product is not working properly ... 1 Reconnect AC adaptor to the base unit. 2 Check if telephone line cord is connected. 3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.) 4 Read FAQ in this Quick Guide and troubleshooting page in the Operating Instructions. Visit our web site: http://www.panasonic.
