TG7331_7341FX(e)_QG.fm Page 1 Friday, July 11, 2008 9:47 AM Model No. KX-TG7331FX KX-TG7341FX Quick Guide To use this unit in your country, first change the unit’s region setting to match your country. Change the unit’s display language as needed. Refer to “Changing the unit’s region setting” in the operating instructions. Connections Base unit “Click” To telephone line DSL/ADSL filter (For DSL/ADSL service users) Use only the supplied telephone line cord.
TG7331_7341FX(e)_QG.fm Page 2 Friday, July 11, 2008 9:47 AM Battery installation/Battery charge Charge for about 7 hours. Rechargeable Ni-MH ONLY “Charging” is displayed. * Model shown is KX-TG7331. Note: L USE ONLY Ni-MH batteries AAA (R03) size. L Do NOT use Alkaline/Manganese/Ni-Cd batteries. Operating tips Using the navigator key The handset navigator key can be used to navigate through menus and to select items shown on the display by pressing {^}, {V}, {<}, or {>}.
TG7331_7341FX(e)_QG.fm Page 3 Friday, July 11, 2008 9:47 AM Display language (Handset) (default: English) 16 display languages are available. You can select “Deutsch”, “English”, “Magyar”, “Polski”, “SlovenČina”, “ČeŠtina”, “Hrvatski”, “Slovenscina”, “Eesti”, “LIETUVIŠKAI”, “LatvieŠu”, “Românã”, “БЪЛГАРСКИ”, “Srpski”, “МАКЕДОНСКИ”, or “Shqip”. 1 2 3 4 5 K (middle soft key) {V}/{^}: “Handset Setup” i M {V}/{^}: “Display Setup” i M {V}/{^}: “Select Language” i M {V}/{^}: Select your desired language.
TG7331_7341FX(e)_QG.fm Page 4 Friday, July 11, 2008 9:47 AM Basic operations Making/Answering calls (Handset) Making calls Dial the phone number. i {C}/{s} Answering calls {C}/{s} To hang up {ih} To adjust the receiver/ speaker volume Press {^} or {V} repeatedly while talking. Making a call using the redial list j (right soft key) i {V}/{^}: Select the desired phone number. i {C} Temporary tone dialling (for rotary/pulse service users) 1 Make a call.
TG7331_7341FX(e)_QG.fm Page 5 Friday, July 11, 2008 9:47 AM Basic operations Phonebook (Handset) Adding entries 1 n (left soft key) i K 2 {V}/{^}: “New Entry” i M 3 Enter the party’s name (16 characters max.). i M L You can change the character entry mode by pressing /. 4 Enter the party’s phone number (24 digits max.). i M 2 times i {ih} L To enter a name, see the character table in the operating instructions. Making calls 1 n (left soft key) 2 {V}/{^}: Select the desired entry.
TG7331_7341FX(e)_QG.fm Page 6 Friday, July 11, 2008 9:47 AM Frequently asked questions Question Cause/solution How long is the battery operating time? L When you are using fully-charged Ni-MH batteries (supplied batteries); In continuous use: 17 hours max. Not in use (standby): 150 hours max. L It is normal for batteries not to reach full capacity at the initial charge. Maximum battery performance is reached after a few complete cycles of charge/discharge (use).
TG7331_7341FX(e)_QG.fm Page 7 Friday, July 11, 2008 9:47 AM Frequently asked questions Question Cause/solution What do I need to do to erase y (Missed call) from the display? L There are unviewed missed calls remaining. View them and erase y in the following way. 1 K (middle soft key) 2 {V}/{^}: “Caller List” i M 3 Press {V} to search from the most recent call, or press {^} to search from the oldest call.
TG7331_7341FX(e)_QG.fm Page 8 Friday, July 11, 2008 9:47 AM Registering a handset to the base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. Handset M 1 K (middle soft key) 2 {V}/{^}: “Handset Setup” i M 3 {V}/{^}: “Register H.set” i M N KX-TG7331 Base unit Press and hold {x} for about 5 seconds, until the registration tone sounds. L The next step must completed within 90 seconds.
TG7331_7341FX(e)_QG.fm Page 9 Friday, July 11, 2008 9:47 AM Optional services (Caller ID and SMS) If you subscribe to a Caller ID service, 012345 caller information will be displayed when a call is received, or when viewing missed calls. To use SMS, you must subscribe to a Caller ID and/or an appropriate service such as SMS.
TG7331_7341FX(e)_QG.
