Operating instructions

– 8 –
Registering a handset to the base unit
The supplied handset and base unit are pre-registered. If for some reason the
handset is not registered to the base unit, re-register the handset.
1 K (middle soft key)
2 {V}/{^}: “Handset Setup” i M
3 {V}/{^}: “Register H.set” i M
Press and hold {x} for about 5 seconds,
until the registration tone sounds.
LThe next step must completed within
90 seconds.
NKX-TG7331
NKX-TG7341
Wait until “Enter Base PIN” is displayed. i
Enter the base unit PIN (default: “0000”). i
M
LWhen the handset has been registered
successfully, w stops flashing.
Handset
M
Base unit
{x}
{x}
Handset
M
TG7331_7341FX(e)_QG.fm Page 8 Friday, July 11, 2008 9:47 AM