TG7301_7321FX(e)_QG.fm Page 1 Wednesday, March 12, 2008 11:08 AM Model No. Quick Guide KX-TG7301FX/KX-TG7302FX KX-TG7321FX To use this unit in your country, first change the unit’s region setting to match your country. Change the unit’s display language as needed. Refer to “Changing the unit’s region setting” in the operating instructions. Connections Base unit “Click” To telephone line Guide Plug DSL/ADSL filter (For DSL/ADSL service users) Use only the supplied telephone line cord.
TG7301_7321FX(e)_QG.fm Page 2 Wednesday, March 12, 2008 11:08 AM Battery installation/Battery charge Charge for about 7 hours. Charger *2 Base unit *1 Rechargeable Ni-MH ONLY “Charging” will be displayed. *1 Model shown is KX-TG7301. *2 KX-TG7302 Note: L USE ONLY Ni-MH batteries AAA (R03) size. L Do NOT use Alkaline/Manganese/Ni-Cd batteries.
TG7301_7321FX(e)_QG.fm Page 3 Wednesday, March 12, 2008 11:08 AM Display language (Handset) (default: English) 16 display languages are available. You can select “Deutsch”, “English”, “Magyar”, “Polski”, “SlovenČina”, “ČeŠtina”, “Hrvatski”, “Slovenscina”, “Eesti”, “LIETUVIŠKAI”, “LatvieŠu”, “Românã”, “БЪЛГАРСКИ”, “Srpski”, “МАКЕДОНСКИ”, or “Shqip”. 1 2 3 4 5 K (middle soft key) {V}/{^}: “Handset Setup” i M {V}/{^}: “Display Setup” i M {V}/{^}: “Select Language” i M {V}/{^}: Select your desired language.
TG7301_7321FX(e)_QG.fm Page 4 Wednesday, March 12, 2008 11:08 AM Basic operations Making/Answering calls (Handset) Making calls Dial the phone number. i {C}/{s} Answering calls {C}/{s} To hang up {ih} To adjust the receiver/ speaker volume Press {^} or {V} repeatedly while talking. Making a call using the redial list j (right soft key) i {V}/{^}: Select the desired phone number. i {C} Temporary tone dialling (for rotary/pulse service users) 1 Make a call.
TG7301_7321FX(e)_QG.fm Page 5 Wednesday, March 12, 2008 11:08 AM Frequently asked questions Question Cause/solution Why is w flashing? L The handset is too far from the base unit. Move closer. L The base unit’s AC adaptor is not connected. Check the connections. L You are using the handset or base unit in an area with high electrical interference. Place the base unit and use the handset away from sources of interference. L The handset is not registered to the base unit. Register it (page 7).
TG7301_7321FX(e)_QG.fm Page 6 Wednesday, March 12, 2008 11:08 AM Frequently asked questions Question Cause/solution What should I do to display caller information? L You must subscribe to a Caller ID service. Contact your service provider/telephone company for details. L The message “You must first subscribe to Caller ID.” will be displayed until you receive caller information after subscribing to a Caller ID service.
TG7301_7321FX(e)_QG.fm Page 7 Wednesday, March 12, 2008 11:08 AM Registering a handset to the base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, register the handset. Handset 1 K (middle soft key) 2 {V}/{^}: “Handset Setup” i M 3 {V}/{^}: “Register H.set” i M M Base unit Proceed with the operation for your model. N KX-TG7301/KX-TG7302 Press and hold {x} for about 5 seconds.
TG7301_7321FX(e)_QG.fm Page 8 Wednesday, March 12, 2008 11:08 AM Optional services (Caller ID and SMS) If you subscribe to a Caller ID service, you can: 012345 – display caller information To use SMS, you must subscribe to a Caller ID and/or an appropriate service.
