Operating Instructions

ManualsBrandsPanasonic ManualsCommunication ProductsKXTG7100FX

PQQW15234ZA DC0406DH0

FX-2/3

Digital Cordless Phone

Model No. KX-TG7100FX/KX-TG7102FX

Digital Cordless Answering System

Model No. KX-TG7120FX

To use this product in Czech or Slovakia, change the unit’s region setting to match your

country.

Refer to “Changing the unit’s region settings” in the operating instructions.

1 Connections

Quick Guide

Base unit Charger (KX-TG7102 only)

(220–240 V,

50 Hz)

To telephone

network

Hook

Use only the included

AC adaptor and

telephone line cord.

Use only the included AC adaptor.

(220–240 V,

50 Hz)

Hooks

TG7100_7120FX(e-e)_QG.fm Page 1 Wednesday, March 29, 2006 7:41 PM

Summary of content (6 pages)

PAGE 1
TG7100_7120FX(e-e)_QG.fm Page 1 Wednesday, March 29, 2006 7:41 PM Digital Cordless Phone Model No. KX-TG7100FX/KX-TG7102FX Digital Cordless Answering System Model No. KX-TG7120FX Quick Guide To use this product in Czech or Slovakia, change the unit’s region setting to match your country. Refer to “Changing the unit’s region settings” in the operating instructions. 1 Connections Base unit Charger (KX-TG7102 only) Hook Hooks (220–240 V, 50 Hz) Use only the included AC adaptor and telephone line cord.
PAGE 2
TG7100_7120FX(e-e)_QG.fm Page 2 Wednesday, March 29, 2006 7:41 PM 2 Battery installation/ Battery charge (Initial charge: 7 hours) Base unit *1 Charger *2 Charge contact *1 The pictured model is KX-TG7100. *2 KX-TG7102 only Note: L Use only the included rechargeable batteries. 3 Symbols used in these operating instructions Symbol Meaning {j/OK} Press {j/OK}. i Proceed to the next operation. “ ” Select the words in quotations shown on the display (e.g., “Handset Setup”) by pressing {^} or {V}.
PAGE 3
TG7100_7120FX(e-e)_QG.fm Page 3 Wednesday, March 29, 2006 7:41 PM Dialling mode (tone/pulse) 1 2 3 4 5 {j/OK} Press {^} or {V} to select “Base Unit Setup”. i {>} Press {^} or {V} to select “Call Options”. i {>} Press {^} or {V} to select “Dial Mode”. i {>} Press {^} or {V} to select the desired setting. i {>} i {ih} Date and time 1 {j/OK} 2 Press {^} or {V} to select “Handset Setup”. i {>} 3 Press {^} or {V} to select “Time Settings”. i {>} i Press {^} or {V} to select “Set Date & Time”.
PAGE 4
TG7100_7120FX(e-e)_QG.fm Page 4 Wednesday, March 29, 2006 7:41 PM Feature Operation Changing ringtone (outside calls) {j/OK} i “Handset Setup” i {>} i “Ringer Setup” i {>} i “Ext. Ringtone” i {>} i Select the desired ringtone. i {>} i {ih} Answering system (KX-TG7120 only) Feature Operation Answering on/off {j/OK} i “Answer System” i {>} i “Answer On” or “Answer Off” i {>} i {ih} Listening to messages {j/OK} i “Answer System” i {>} i “Play New Msg.” or “Play All Msg.
PAGE 5
TG7100_7120FX(e-e)_QG.fm Page 5 Wednesday, March 29, 2006 7:41 PM Question Cause & solution How long is the battery operating time? When you are using fully-charged Ni-MH batteries (included batteries); In continuous use: 17 hours max. In continuous standby mode: 180 hours max. L It is normal for batteries not to reach full capacity at the initial charge. Maximum battery performance is reached after a few complete cycles of charge/discharge (use).
PAGE 6
TG7100_7120FX(e-e)_QG.fm Page 6 Wednesday, March 29, 2006 7:41 PM 6 Optional service (Caller ID and SMS) If you subscribe to Caller ID service, you can: Tom 012345 – display caller information To use SMS, you must subscribe to Caller ID and/or appropriate service.