TG6481E(e)_QG.fm Page 1 Thursday, April 16, 2009 6:52 PM Model No. KX-TG6481E KX-TG6482E Quick Guide Connections Base unit “Click” Correct Hooks Use only the supplied telephone line cord. DSL/ADSL filter* (Not supplied) To telephone line Press plug firmly. (220-240 V AC, 50 Hz) Base unit Wrong Base unit Use only the supplied Panasonic AC adaptor. *For DSL/ADSL service users Important: L If you use a telephone line cord which is not supplied, the unit may not work properly.
TG6481E(e)_QG.fm Page 2 Thursday, April 16, 2009 6:52 PM Battery installation/Battery charge Charge for about 7 hours. Confirm “Charging” is displayed. Rechargeable Ni-MH ONLY Note: L USE ONLY Ni-MH batteries AAA (R03) size. L Do NOT use Alkaline/Manganese/Ni-Cd batteries. L When the language selection is displayed after installing the batteries for the first time, you can select your desired language. {V}/{^}: Select your desired language.
TG6481E(e)_QG.fm Page 3 Thursday, April 16, 2009 6:52 PM Date and time (Handset) 1 2 3 4 5 6 7 K (middle soft key) {V}/{^}: “Handset Setup” i M {V}/{^}: “Time Settings” i M {V}/{^}: “Set Date/Time” i M Enter the current date, month, and year. Enter the current hour and minute. M i {ic} Basic operations Making/Answering calls (Handset) Making calls Dial the phone number.
TG6481E(e)_QG.fm Page 4 Thursday, April 16, 2009 6:52 PM Basic operations Phonebook (Handset) Making calls 1 n (left soft key) 2 {V}/{^}: Select the desired entry. L You can scroll through the phonebook entry by pressing and holding {V} or {^}. 3 {C} Answering system (Base unit) Answering on/off Press {s} to turn on/off the answering system. Listening to messages {6} Frequently asked questions Question Cause/solution Why is w flashing? L The handset is too far from the base unit. Move closer.
TG6481E(e)_QG.fm Page 5 Thursday, April 16, 2009 6:52 PM Frequently asked questions Question Cause/solution When should I replace the batteries? L If the batteries are fully charged until 1 is displayed, but 3 is displayed after a few calls, replace the batteries with new ones. What is a PIN? L The PIN is a 4-digit number that must be entered in order to change certain base unit settings. The default PIN is “0000”.
TG6481E(e)_QG.fm Page 6 Thursday, April 16, 2009 6:52 PM Registering a handset to the base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. Handset 1 K (middle soft key) 2 {V}/{^}: “Handset Setup” i M 3 {V}/{^}: “Register H.set” i M M Base unit Press and hold {x} for about 5 seconds, until the registration tone sounds. L The next step must be completed within 90 seconds.
TG6481E(e)_QG.fm Page 7 Thursday, April 16, 2009 6:52 PM Optional service (Caller ID) If you subscribe to a Caller ID service, 012345 caller information will be displayed when a call is received, or when viewing missed calls. Sales and support information Customer Care Centre L For customers within the U.K.: 0844 844 3898 L For customers within the Republic of Ireland: 01289 8333 L Visit our website for product information: www.panasonic.co.uk L E-mail: customer.care@panasonic.co.
TG6481E(e)_QG.fm Page 8 Thursday, April 16, 2009 6:52 PM IMPORTANT If you have any problems operating this product, please try the following: 1 Reconnect AC adaptor. 2 Use supplied telephone line cord. 3 Use rechargeable Ni-MH batteries. (Alkaline batteries CANNOT be used.) Refer to Troubleshooting in Operating Instructions and FAQs in this Quick Guide. If you still have any problems, please call the Panasonic DECT Helpline 0844 844 3898 (U.K.
