TG6481FX(e)_QG.fm Page 1 Friday, June 5, 2009 4:49 PM Model No. KX-TG6481FX Quick Guide To use this unit in your country, first change the unit’s region setting to match your country. Change the unit’s display language as needed. Refer to “Changing the unit’s region setting” in the operating instructions. Connections Base unit “Click” Correct Hooks Use only the supplied telephone line cord. To telephone line Press plug firmly.
TG6481FX(e)_QG.fm Page 2 Friday, June 5, 2009 4:49 PM Battery installation/Battery charge Charge for about 7 hours. Confirm “Charging” is displayed. Rechargeable Ni-MH ONLY Note: L USE ONLY Ni-MH batteries AAA (R03) size. L Do NOT use Alkaline/Manganese/Ni-Cd batteries. L When the language selection is displayed after installing the batteries for the first time, you can select your desired language. {V}/{^}: Select your desired language.
TG6481FX(e)_QG.fm Page 3 Friday, June 5, 2009 4:49 PM Display language (Handset) (default: English) 9 display languages are available. You can select “ ”, “ “ ”, “ ”, “ ”, “ ”, “ ”, “ ” or “ ”, ”. If you select a language you cannot read: {ic} i K i {^} 3 times i M i {V} 2 times i M 2 times i {V}/{^}: Select your desired language. i M i {ic} Dialling mode (Handset) (default: Tone) 1 2 3 4 K (middle soft key) {V}/{^}: “Base Unit Setup” i M {V}/{^}: “Dial Mode” i M {V}/{^}: Select the desired setting.
TG6481FX(e)_QG.fm Page 4 Friday, June 5, 2009 4:49 PM Basic operations Making/Answering calls (Handset) Handset ringer volume 1 2 3 4 5 K (middle soft key) {V}/{^}: “Handset Setup” i M {V}/{^}: “Ringer Setup” i M {V}/{^}: “Ringer Volume” i M {V}/{^}: Select the desired volume. i M i {ic} Phonebook (Handset) Adding entries 1 n (left soft key) i K 2 {V}/{^}: “New Entry” i M 3 Enter the party’s name (16 characters max.). i M L You can change the character entry mode by pressing /.
TG6481FX(e)_QG.fm Page 5 Friday, June 5, 2009 4:49 PM Frequently asked questions Question Cause/solution Why is w flashing? L The handset is too far from the base unit. Move closer. L The base unit’s AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. L You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. L The handset is not registered to the base unit.
TG6481FX(e)_QG.fm Page 6 Friday, June 5, 2009 4:49 PM Frequently asked questions Question Cause/solution What should I do to display caller information? L You must subscribe to a Caller ID service. Contact your service provider/telephone company for details. L The message “You must first subscribe to Caller ID.” will be displayed until you receive caller information after subscribing to a Caller ID service.
TG6481FX(e)_QG.fm Page 7 Friday, June 5, 2009 4:49 PM Registering a handset to the base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. Handset 1 K (middle soft key) 2 {V}/{^}: “Handset Setup” i M 3 {V}/{^}: “Register H.set” i M M Base unit Press and hold {x} for about 5 seconds, until the registration tone sounds. L The next step must be completed within 90 seconds.
TG6481FX(e)_QG.fm Page 8 Friday, June 5, 2009 4:49 PM Optional services (Caller ID and SMS) If you subscribe to a Caller ID service, 012345 caller information will be displayed when a call is received, or when viewing missed calls. To use SMS, you must subscribe to a Caller ID and/or an appropriate service such as SMS.
