Quick Start Guide

– 6 –
Registering a handset to the base unit
The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to
the base unit, re-register the handset.
1 8 (middle soft key)
2 {V}/{^}: “Handset Setup” i M
3 {V}/{^}: “Register H.set” i M
Press and hold {x} for about 5 seconds, until the
registration tone sounds.
LThe next step must be completed within 90 seconds.
Wait until “Base PIN” is displayed. i Enter the base
unit PIN (default: “0000”). i M
LWhen the handset has been registered successfully,
w stops flashing.
Handset
M
Base unit
{x}
Handset
M
TG6461E_QG(e).fm Page 6 Friday, March 13, 2009 3:08 PM