TG643x_QG(e).fm Page 1 Thursday, November 27, 2008 4:57 PM Model No. KX-TG6431/KX-TG6432 KX-TG6433/KX-TG6434 KX-TG6441/KX-TG6442 KX-TG6443/KX-TG6444 KX-TG6445 Quick Guide Setting up Base unit L Use only the supplied Panasonic AC adaptor PQLV219. Press plug firmly. Hooks “Click” (120 V AC, 60 Hz) To single-line telephone jack (RJ11C) Correct Base unit Wrong Base unit DSL/ADSL filter* (Not supplied) *For DSL/ADSL service users Handset L USE ONLY Ni-MH batteries AAA (R03) size.
TG643x_QG(e).fm Page 2 Thursday, November 27, 2008 4:57 PM Operating tips Navigator key/? (Volume) key By pressing this key ({^} or {V}) repeatedly, you can: − scroll through (up or down) various lists or items − adjust the receiver or speaker volume (up or down) while talking − move the cursor (left or right) to edit number or name Volume up {^} {V} Volume down Soft keys The handset features 3 soft keys. By pressing a soft key, you can select the feature shown directly above it on the display.
TG643x_QG(e).fm Page 3 Thursday, November 27, 2008 4:57 PM Basic operations Making/Answering calls (Handset) Making calls Dial the phone number. i {C}/{s} Answering calls {C}/{s} To hang up {OFF} To adjust the receiver or speaker volume Press {^} or {V} repeatedly while talking. Making a call using the redial list {REDIAL} i {V}/{^}: Select the desired phone number. i {C} To adjust the handset ringer volume 1 {MENU} i {#}{1}{6}{0} 2 {V}/{^}: Select the desired volume.
TG643x_QG(e).fm Page 4 Thursday, November 27, 2008 4:57 PM Frequently asked questions Question Cause/solution Why is _ displayed? L The handset is too far from the base unit. Move closer. L The base unit’s AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. L You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. L The handset is not registered to the base unit.
TG643x_QG(e).fm Page 5 Thursday, November 27, 2008 4:57 PM Quick troubleshooting 1 Handset shows: “No link. Reconnect base AC adaptor.” Place the handset on the base unit, then check if “Charging” is displayed. “Charging” is not displayed. Unplug and then plug AC adaptor properly to both the base unit and AC outlet. “Charging” is displayed. “Charging” is displayed, now. “Charging” is still not displayed. Lift the handset, then try again.
TG643x_QG(e).fm Page 6 Thursday, November 27, 2008 4:57 PM Quick troubleshooting 2 No dial tone is heard from handset. See if “Check tel Displayed line” is shown on the handset display. Not displayed Lift up the handset from the base unit or charger. Press {C} at the handset, then check if the display shows “Talk”. No link. Reconnect base AC adaptor. Check if the telephone cord is properly connected to both the base unit and telephone line jack on the wall.
TG643x_QG(e).fm Page 7 Thursday, November 27, 2008 4:57 PM Registering a handset to a base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. Handset {MENU} i {#}{1}{3}{0} {MENU} Base unit Press and hold {LOCATOR} for about 4 seconds until the registration tone sounds. L The next step must be completed within 90 seconds. {LOCATOR} Handset Press {OK}, then press {OFF} after a long beep sounds.
TG643x_QG(e).fm Page 8 Thursday, November 27, 2008 4:57 PM IMPORTANT! If your product is not working properly ... 1 Reconnect AC adaptor to the base unit. 2 Check if telephone line cord is connected. 3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.) 4 Read FAQ in this Quick Guide and troubleshooting page in the Operating Instructions. Visit our web site: http://www.panasonic.
