TG562x_QG(e).fm Page 1 Tuesday, December 13, 2005 2:57 PM Model No. KX-TG5621 KX-TG5622 KX-TG5623 Quick Guide Setting up Base unit CHARGE 7 HOURS Use only the included Panasonic AC adaptor PQLV1 or PQLV256. Press plug firmly. OR Hook (120 V AC, 60 Hz) To single-line telephone jack (RJ11C) “Click” Noise filter (For DSL Service users) “Click” Handset Confirm CHARGE indicator is on. B A Confirm “Charging” is displayed.
TG562x_QG(e).fm Page 2 Tuesday, December 13, 2005 2:57 PM Operating tips { }: shows button names. Using the navigator key After pressing {MENU} or {Phonebook}, the handset navigator key can be used. Press {^}, {V}, {<}, or {>} to navigate through menus and to select items shown on the display. {^} {>} {<} {V} Adjusting audio volume Press {^} or {V} repeatedly while talking. Handset soft keys The handset features 2 soft keys.
TG562x_QG(e).fm Page 3 Tuesday, December 13, 2005 2:57 PM Basic operation (Handset) Feature Operation Adjusting the receiver/ speaker volume Press {^} or {V} repeatedly while talking. Viewing the caller list and calling back Press {^} or {V} repeatedly to select the desired item. i {C} Ringer volume 1 {MENU} i {1}{1} 2 Select the desired volume. i {Save} Answering call-waiting call (2nd call) Press {CALL WAIT} when you hear call waiting tone.
TG562x_QG(e).fm Page 4 Tuesday, December 13, 2005 2:57 PM Quick troubleshooting 1 Handset shows: “No link to base. Move closer to base, try again.” Place the handset on the base unit, then check if CHARGE indicator is on. CHARGE indicator is OFF. Unplug and then plug AC adaptor properly to both the base unit and AC outlet. CHARGE indicator is still OFF. OR CHARGE indicator is ON. CHARGE indicator is ON, now. Lift the handset, then try again.
TG562x_QG(e).fm Page 5 Tuesday, December 13, 2005 2:57 PM Quick troubleshooting 2 No dial tone is heard from handset. Lift up the handset from the base unit or charger. Press {C} (TALK) at the handset, then check if the display shows “Talk”. No link to base. Move closer to base, try again. {C} “No link to base. Move closer to base, try again.” is displayed. Talk K(VE) “Talk” is displayed. MuteL Press {s} (SP-PHONE), then check if the dial tone is heard from the speaker on the back.
TG562x_QG(e).fm Page 6 Tuesday, December 13, 2005 2:57 PM Frequently asked questions Question Cause/solution How can I increase handset volume level? L Press navigator key {^} repeatedly while talking. Why is the conversation noisy or cutting off? L Try to relocate the base unit so that distance from location to use the handset will be minimized. L Send your unit to service, if your unit has same problem when the handset is next to the base unit.
TG562x_QG(e).fm Page 7 Tuesday, December 13, 2005 2:57 PM Registering a handset to base unit The included handset and base unit are preregistered. If for some reason the handset is not registered to the base unit, register the handset. Handset Press {MENU}, then press {0}{0}. Refer to manual to prepare base. Then press OKL {MENU} Base unit L KX-TG5621 Press and hold {HANDSET LOCATOR} until the CHARGE indicator flashes.
TG562x_QG(e).fm Page 8 Tuesday, December 13, 2005 2:57 PM IMPORTANT! If your product is not working properly. . . 1 Read this Quick Guide or Operating Instructions L If you lost Operating Instructions, you can download at http://www.panasonic.com/phonehelp 2 Visit our website: http://www.panasonic.com/phonehelp L FAQs and troubleshooting hints are available. 3 Contact us via the web at: http://www.panasonic.
