Operating Instructions Digital Cordless Phone Model No. Model shown is KX-TG1611. KX-TG1611FX KX-TG1612FX KX-TG1613FX KX-TG1711FX Model shown is KX-TG1711. Before initial use, see “Getting Started” on page 10. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. TG161x_1711FX(en)_0521_ver003.
Table of Contents Introduction Model composition .......................................3 Accessory information ..................................3 General information ......................................4 Graphical symbols for use on equipment and their descriptions ..........................................5 Important Information For your safety .............................................6 Important safety instructions ........................7 For best performance ...................................
Introduction Model composition Base unit Handset Part No. Part No. KX-TG1611 KX-TG1611 KX-TGA161 1 KX-TG1612 KX-TG1611 KX-TGA161 2 KX-TG1613 KX-TG1611 KX-TGA161 3 KX-TG1711 KX-TG1711 KX-TGA171 1 Series Model No. KX-TG1611 series KX-TG1711 series Quantity Accessory information Supplied accessories Quantity No.
Introduction Other information R Design and specifications are subject to change without notice. R The illustrations in these instructions may vary slightly from the actual product. General information R This equipment is designed for use on the Czech, Slovakia, Estonia, Latvia, Lithuania, Croatia, Slovenia, Romania and Bulgaria analogue telephone network. R In the event of problems, you should contact your equipment supplier in the first instance.
Introduction Graphical symbols for use on equipment and their descriptions Symbol Explanation Symbol Explanation Alternating current (A.C.) Class P equipment (equipment in which protection against electric shock relies on Double Insulation or Reinforced Insulation) Direct current (D.C.
Important Information R Do not allow the AC adaptor or telephone line cord to be excessively pulled, bent or placed under heavy objects. For your safety To prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock.
Important Information R This product is unable to make calls when: – the handset batteries need recharging or have failed. – there is a power failure. Battery R We recommend using the batteries noted on page 3. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. R Do not mix old and new batteries. R Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed.
Important Information appliances, etc. It should not be placed in rooms where the temperature is less than 0 °C or greater than 40 °C. Damp basements should also be avoided. R The maximum calling distance may be shortened when the product is used in the following places: Near obstacles such as hills, tunnels, underground, near metal objects such as wire fences, etc. R Operating the product near electrical appliances may cause interference. Move away from the electrical appliances.
Important Information Specifications R Standard: DECT (Digital Enhanced Cordless Telecommunications), GAP (Generic Access Profile) R Frequency range: 1.88 GHz to 1.90 GHz R RF transmission power: Approx. 10 mW (average power per channel) 250 mW (max.) R Power source: 100–240 V AC, 50/60 Hz R Rechargeable battery: AAA (R03) Ni-MH battery (1.2 V, 550 mAh) R Power consumption: Base unit: Standby: 0.6 W Maximum: 1.5 W Charger: Standby: 0.1 W Maximum: 1.
Getting Started n KX-TG1711 series Setting up 4 Connections n Base unit Connect the AC adaptor to the unit by pressing the plug firmly. Fasten the cord by hooking it. Connect the AC adaptor to the power outlet. Connect the telephone line cord to the unit, then to the telephone line jack until you hear a click. A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service. Note: R Use only the supplied Panasonic AC adaptor PNLV226CE. R Use only the supplied telephone line cord.
Getting Started Removing the battery Battery installation R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (1). R Do NOT use alkaline/manganese/Ni-Cd batteries. R Confirm correct polarities ( , ). 1 1 2 4 2 3 Battery charging 1 Charge for about 7 hours. R Confirm is flashing (1). R When the batteries are fully charged, stops flashing. 1 11 TG161x_1711FX(en)_0521_ver003.
Getting Started Ni-MH battery performance (supplied batteries) Note when setting up Note for connections R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Getting Started M N (Locator) R You can locate a misplaced handset by pressing M N. n KX-TG1711 series: page 3 E Handset n KX-TG1611 series: page 3 F E G M I B F C G M H A J H A I B C D J K L D K L A A MWN (Phonebook) M N (Talk) MCN (Clear) R You can return to the previous screen or outside call by pressing MCN.
Getting Started – (Volume: MDN or MCN) : Adjust the receiver volume while talking. – MFN ( : Caller list): View the caller list. – MEN (T: Redial): View the redial list. Language setting Display language 1 2 Display icons Handset display items Item The line is in use. R When flashing slowly: The call is on hold. R When flashing rapidly: An incoming call is now being received. R Missed call*1 (page 23) R When flashing: Call waiting is being received. R Ringer volume is off.
Making/Answering Calls Making calls Answering calls 1 Lift the handset and then dial the phone number. R To correct a digit, press MCN. 1 2 3 Press M N to make the call. When you finish talking, press MeN or place the handset on the base unit or charger. Adjusting the receiver volume Press MDN or MCN repeatedly while talking. Making a call using the redial list The last 10 phone numbers dialled are stored in the redial list (24 digits max. each).
Making/Answering Calls extension call, or accessing optional telephone services. Note: R To change the recall/flash time, see page 21. Transferring calls, conference calls Available for: KX-TG1612/KX-TG1613 For call waiting or Call Waiting Caller ID service users Outside calls can be transferred or a conference call with an outside party can be made between handsets in the same radio cell. To use call waiting or Call Waiting Caller ID, you must first subscribe with your phone service provider.
Making/Answering Calls R If you receive an outside call while talking on the intercom, the interrupt tone sounds. To finish intercom, press MeN. To N. answer the call, press M Making an intercom call 1 2 3 M 4 When you finish talking, press MeN. N MbN: “Intercom” a M N MbN: Select the desired unit. a M R To page all handsets, press *, or N again. M R To stop paging, press MeN. N Answering an intercom call 1 2 Press M N to answer the page. When you finish talking, press MeN.
Phonebook Phonebook You can add 50 names (16 characters max.) and phone numbers (24 digits max.) to the phonebook. Important: R All entries can be shared by any registered handset. Finding and calling from a phonebook entry 1 2 Adding phonebook entries 1 2 3 MWN a M N MbN: “New Entry” a M N N Enter the party’s name. a M R You can change the character entry mode (page 25) by pressing MWN a MbN: Select a character entry mode. N aM 4 Enter the party’s phone number.
Phonebook 1 2 3 During an outside call, press MWN. MbN: Select the desired entry. Press M N to dial the number. Note: R When storing a calling card access number and your PIN in the phonebook as one phonebook entry, press MPN (Pause) to add pauses after the number and PIN as necessary (page 15). R If you have rotary/pulse service, you need to press * before pressing MWN in step 1 to change the dialling mode temporarily to tone.
Programming Menu list To access the features, there are 2 methods. n Scrolling through the display menus N 1 M 2 3 4 Press MCN or MDN to select the desired main menu. a M N Press MCN or MDN to select the desired item from the next sub-menus. a M Press MCN or MDN to select the desired setting. a M N N n Using the direct command code 1 M N a Enter the desired code. N#101. Example: Press M 2 Select the desired setting. a M N Note: R To exit the operation, press MeN.
Programming Main menu: “Caller List” Operation Code Viewing the caller list. #213 23 Main menu: “InitialSetup” Sub-menu 1 Sub-menu 2 Settings Code Display Clock Disp.*5 Off #198 – Contrast (Display contrast) Level 1–6 <3> #145 – Keytones*6 – Off #165 – Auto Talk*7 – On #200 15 Line Setup Dial Mode*3 Pulse #120 14 Recall/Flash*3, *8, *9 80 msec. 90 msec. 100 msec. 110 msec. 160 msec. 200 msec. 250 msec. 300 msec. 400 msec. <600 msec.> 700 msec.
Programming *3 If you program these settings using one of the handsets, you do not need to program the same item using another handset. (KX-TG1612/KX-TG1613) *4 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received. To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”. (Caller ID subscribers only) To use this feature, set the date and time first (page 14).
Caller ID Service Using Caller ID service Important: R This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. Contact your phone service provider for details. Phonebook name display When caller information is received and it matches a phone number stored in the phonebook, the stored name in the phonebook is displayed and logged in the caller list. Caller ID features Caller list When an outside call is being received, the caller information is displayed.
Caller ID Service 2 MbN: Select the desired entry. a M N 3 MbN: “Erase” or “Erase All” a N 2 times M 4 MeN 24 TG161x_1711FX(en)_0521_ver003.
Useful Information Voicemail service Voicemail is an answering service that may be offered by your phone service provider. This service can also record calls when you are unavailable to answer the phone or when your line is busy. Messages are recorded on the phone company system. is displayed on the handset if message indication service is When you have new messages, available. Please contact your phone service provider for details of this service.
Useful Information Numeric entry table (0-9) z 1 2 Greek character table ( z 1 2 3 1 2 5 6 7 8 9 y 4 5 6 7 8 9 y 4 5 6 7 8 9 y 7 8 9 y ) 3 Extended 1 character table ( z 4 ) 3 R The following are used for both uppercase and lowercase: Extended 2 character table ( z 1 2 ) 3 4 5 6 R The following are used for both uppercase and lowercase: 26 TG161x_1711FX(en)_0521_ver003.
Useful Information Cyrillic character table ( z 1 2 ) 3 4 5 6 7 8 9 y Error messages Display message Cause/solution Base NoPower or No Link R Confirm the base unit’s AC adaptor is connected to the unit and the power outlet correctly. R The handset has lost communication with the base unit. Move closer to the base unit and try again. R Unplug the base unit’s AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handset’s registration may have been cancelled.
Useful Information Problem Cause/solution The unit does not work. R R R R The handset display is blank. R The handset is not turned on. Turn the power on (page 14). I cannot hear a dial tone. R Make sure that you are using the supplied telephone line cord. Your old telephone line cord may have a different wiring configuration. R The base unit’s AC adaptor or telephone line cord is not connected. Check the connections.
Useful Information Making/answering calls, intercom Problem is flashing. Cause/solution R The handset is too far from the base unit. Move closer. R The base unit’s AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. R The handset is not registered to the base unit. Register it (page 30). Noise is heard, sound cuts in and out. R You are using the handset or base unit in an area with high electrical interference.
Useful Information Liquid damage Problem Cause/solution Liquid or other form of moisture has entered the handset/base unit. R Disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorised service centre.
Useful Information Wall mounting Note: R Make sure that the wall and the fixing method are strong enough to support the weight of the unit. R Drive the screws (not supplied) into the wall (recommended heights £ 1.5 m). 1 Screws 2 30 mm 3 25 mm n Base unit n Charger Available for: KX-TG1611/KX-TG1612/KX-TG1613 2 3 1 1 Caution: R Place the handset properly on the cradle to prevent harm from accidental fall. 31 TG161x_1711FX(en)_0521_ver003.
Index Index A B C D E H I K M P R T V Alarm: 22 Answering calls: 15 Auto talk: 15, 21 Battery: 11, 12 Call share: 16 Call waiting: 16 Call Waiting Caller ID: 16 Caller ID service: 23 Caller list: 23 Caller list edit: 23 Chain dial: 18 Character entry: 25 Conference calls: 16 Control type: 13 Date and time: 14 Dialling mode: 14 Direct command code: 20 Display Clock: 21 contrast: 21 Language: 14 Error messages: 27 Handset Deregistration: 30 Locator: 13 Registration: 30 Hold: 15 Intercom: 16 Key tone
Notes 33 TG161x_1711FX(en)_0521_ver003.
Notes 34 TG161x_1711FX(en)_0521_ver003.
Notes 35 TG161x_1711FX(en)_0521_ver003.
N Czech / Česká republika Produkt Panasonic Doklad o nákupu si prosím uschovejte. Informace a podmínky záruky pro tento produkt jsou k dispozici na www.panasonic.com/cz nebo na následujících telefonních číslech: 236032911 – číslo pro volání z pevné linky panasonic.praha@eu.panasonic.com N Slovakia / Slovenská republika Výrobok Panasonic Odložte si doklad o kúpe. Záručné podmienky a informácie o tomto výrobku sú dostupné na www.panasonic.
