Operating Instructions Digital Cordless Phone Model No. KX-TG1070FX KX-TG1072FX Digital Cordless Answering System Model No. KX-TG1090FX KX-TG1070 Charge the batteries for about 10 hours before initial use. Table of Contents Introduction ................................................. 2 Preparation .................................................. 4 Useful Telephone Settings ....................... 10 Making / Answering Calls ......................... 12 Phonebook ......................................
Introduction Thank you for purchasing a new Panasonic digital cordless phone. For your future reference Attach or keep original receipt to assist with any repair under warranty. Serial No. (found on the bottom of the unit) Date of purchase Name and address of dealer Note: • In the event of problems, you should contact your equipment supplier in the first instance. Declaration of Conformity: Panasonic Communications Co., Ltd.
Introduction Included accessories Quantity No. Accessory items KX-TG1070 KX-TG1090 KX-TG1072 1. AC adaptor for base unit Part No. PQWATG1070CE 1 1 2. Telephone line cord 1 1 3. Rechargeable batteries AAA (R03) size Part No. HHR-55AAAB or HHR-4EPT 2 4 4. Handset cover* 1 2 5. Charger Part No. PQWETGA107CE _ 1 * The handset cover comes attached to the handset. 1. 4. 2. 3. 5.
Preparation Important information Warning: • General • • • • • • • Use only the AC adaptor included with this product, noted on page 3. Do not connect the AC adaptor to any AC outlet other than a standard 220240 V AC outlet. This product is unable to make calls when: - The portable handset battery(ies) need recharging or have failed. - There is a power failure. - The key lock feature is turned on. Do not open the base unit, charger or handset other than to replace the battery(ies).
Preparation Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
Preparation Connections Location For maximum distance and noise-free operation, place your base unit: • Away from electrical appliances such as TVs, radios, personal computers or other phones. • In a convenient, high and central location. Base unit Hook Battery installation 1. To telephone network 2. 220-240 V, 50 Hz Note: • Use only the included AC adaptor and telephone line cord. • Connect the AC adaptor securely to the AC outlet. • To mount the base unit to the wall, see page 23.
Preparation Battery charge Place the handset on the base unit or charger for about 10 hours before initial use. and are alternately When charging, shown on the display. When the batteries are remains on the display. highly charged, Battery strength Battery icon Meaning The handset can be used. Needs to be charged. • • not in use (standby). Even after the handset is fully charged, the handset can be left on the base unit or charger without any ill effect on the batteries.
Preparation Handset Charger KX-TG1072 KX-TG1090 1 1. Charge contacts Displays Icons Meaning 1. Receiver 2. Display 3. [ /C] Answering system / Clear / Mute 4. [ ] Talk 5. [ ] Speakerphone 6. [ / ] Volume down / Redial list 7. Charge contacts 8. [ /INT] Phonebook / Intercom* 9. [ /OK] Setting/OK 10. [ /CID] Volume up / Call log 11. [ ] Off 12. [R] Recall 13. Microphone * For models with 2 or more handsets included.
Preparation Icons Meaning Displayed when you press [ ] Displayed when you press [ ] Displayed when you press [R] Symbols used in these operating instructions Symbol Meaning [ /OK] Press [ > Proceed to the next operation /OK] Displayed when you long press [0] [ ] If the current handset number is 2, “[2]” is displayed Displayed when you press and hold [INT].
Useful Telephone Settings Guide to telephone settings For your reference, a chart of all items which can be customized for the telephone is printed below.
Useful Telephone Settings Handset ringer volume 1 2 • • 3 [ /OK] > [5] Press [ ] or [ ] to select handset ringer volume. 5 levels are available. The handset plays the selected tone at that volume while selecting. [ /OK] to save the setting. Handset key tone (On/Off) 1 2 3 [ /OK] > [6] Press [ ] or [ ] to select handset key tone “On” or “OFF”. [ /OK] to save the setting. Dial mode (Tone/Pulse) 1 2 [ /OK] > [7] Press [ ] or [ ] to select between tone “1” and pulse “2” dial modes.
Making / Answering Calls Making calls Answering calls 1 • 1 2 2 Predial the phone number > [ ] If you make a mistake while predialling a phone number, press [C] to clear it. Press and hold [C] to clear all inputs. When finished talking, press [ ] or place the handset on the base unit or charger. Adjusting the receiver volume Press [ ] or [ ] while on a call. 5 levels are available. Press [ ] to answer the call. When finished talking, press [ ] or place the handset on the base unit or charger.
Making / Answering Calls Redialling Silent mode The last 4 numbers dialled (each 20 digits max.) are stored in the redial list. 1 [ / ] > Press [ ] or [ ] to select a desired number. 2 Press [ ] to start redialling. Note: • If the number is more than 12-digit long, only the last 11 digits will be displayed preceded by a “_”. To switch off ringer, press and hold [ ] until “ ” shows on the display. • When an incoming call is received, only “ ” flashes on the display to indicate an incoming call.
Phonebook Adding entries to the phonebook The phonebook allows you to make calls without having to dial manually. You can add 10 phone numbers to the phonebook. 1 [ /OK] > [ ] 2 Press [ ] or [ ] to select a phonebook location (0-9). 3 Enter the party’s phone number (20 digits max.). 4 [ /OK] to save the phone number in the phonebook. Making calls 1 [ ] > Press [ ] or [ ] to display the desired entry. 2 [ ] Note: • (KX-TG1090) - Press [ ] to talk through the earpiece. If you want to ].
Caller ID Service Using Caller ID service Important: • This unit is Caller ID compatible. To use Caller ID features (such as displaying caller phone numbers), you must subscribe to Caller ID service. Consult your service provider/ telephone company for details. Caller ID features When new calls have been received, the display will show the number of new calls. If a call is not answered, phone numbers of the last 10 different callers will be listed in the call log and “-CALL-” is shown on the display.
Answering System Feature (KX-TG1090) Answering system The unit contains an answering system which can answer and record calls for you when you are unavailable to answer the phone. The total recording capacity (including your greeting message and caller messages) is about 8 minutes. Important: • When callers leave messages, the unit records the date and time of each message. Make sure the date and time have been set (page 10). • Messages are retained even if a power failure occurs.
Answering System Feature (KX-TG1090 ) Deleting the greeting message ] 1 [ • “ ” flashes on the display. 2 [7 ] 3 Press [#x] to delete user’s greeting message while listening to the greeting message. Prerecorded greeting message cannot be deleted. After you have erased your own greeting message, the unit will play a prerecorded greeting message. 4 [ ] Recording incoming messages After the answering system is turned on, it will pick up incoming calls after 4 rings without user’s answering.
Answering System Feature (KX-TG1090) Turning call screening on / off 1 • 2 3 4 [ ] “ ” flashes on the display. [3 SCREEN] Press [ ] or [ ] to select between “On” and “OFF”. [ /OK] to save the setting. >[ ] Screening calls While a caller is leaving a message, you can listen to the call through the handset speaker. To adjust the speaker volume, press [ ] or [ ] repeatedly. You can answer the call by pressing [ ] on the handset.
Multi-unit Operation (KX-TG1072) Intercom between handsets Transferring an outside call to handsets Intercom calls can be made between handsets. Example: When handset 1 calls handset 2 1 Handset 1: Press and hold [INT] until “ ” shows on the display. Press [2] (desired handset number). 2 Handset 2: Press [ ] to answer. 3 When finished talking, press [ ]. Note: • If phonebook is shown when you press [INT], press [C], then press and hold [INT].
Useful Information Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base unit's AC adaptor and remove the handset batteries. Then reconnect the AC adaptor and install the batteries. Problem disappears. Cause & Solution • • • • flashes. • • I cannot make or receive calls. • • The handset is too far from the base unit. Move closer. The AC adaptor is not connected. Check the connections.
Useful Information Problem Cause & Solution Noise is heard during a call. • You are using the handset or base unit in an area with high electrical interference. Place the handset and base unit away from interference sources, such as antennas and mobile phones. Pressing [ ] does not display/ dial the last number dialled. • The redialled number was more than 20 digits long. Redial the number manually. I tried to charge the batteries, but they do not charge at all.
Useful Information Answering system (KX-TG1090) Problem Cause & Solution The unit does not record new messages. • The answering system is turned off. Turn it on (page 16). The other party complains that they cannot leave a message. • The answering system is turned off. Turn it on (page 16). Message memory is full. Erase unnecessary messages (page 17). • I cannot operate the answering system with the handset. • • I cannot operate the answering system remotely.
Useful Information Handset registration Specifications The included handset and base unit are is not shown on the preregistered. If handset display when the unit is turned on, the handset is not registered to the base unit. Register the handset. 1 Base unit: Press and hold page button [ ] for about 10 seconds to go to registration mode. • If all registered handsets start ringing in step 1, press [ ] to stop and try again.
1999/5/EC Panasonic Communications Zhuhai Co., Ltd. 3 Ping Xi 8 Lu, Nanping Keji Gongye Yuan, Zhuhai, Guangdong, China 519060 Copyright: This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd. © 2006 Panasonic Communications Co., Ltd. All Rights Reserved.
