REFERENCE GUIDE

Issue 210
Station Programming
Before programming, you need to enter into Programming mode.
When the telephone is idle and Replace the handset or press SP-PHONE;
Press : PAUSE 9 9 .
To exit from Programming mode.
Press : PAUSE .
or
Lift the handset.
Flexible Button Assignment
Press the desired Exchange line button.
Dial 1 - 7 , + desired number (such as phone number or feature number, if required).
-1 : DSS button
-2 + desired number :
One-Touch Dialling button
-3 : MESSAGE button
-4 : FWD/DND button
-5 : SAVE button
-6 : Account button
-7 : Conference (CONF) button
Press STORE button.
Note:
To erase an incorrect entry while assigning: press the TRANSFER button.
To clear the assignment : press the desired Exchange line button + 2 + STORE button.
Full One-Touch Dialling Setting
Dial 3 .
Dial 1 or 2 .
-1 : Off
-2 : On
Press STORE button.