Digital Super Hybrid System p Reference Guide Proprietary Telephones and DSS Console for Digital Super Hybrid Systems The KX-T7020E, KX-T7130E, KX-T7040E, and KX-T7050E can perform most of the functions of the systems. Please read before using.
Thank you for purchasing this Panasonic Telephone System.
Table of Contents________________________ 5 5 8 9 9 9 9 9 9 10 10 10 11 11 11 11 12 12 12 12 12 12 12 12 12 12 13 13 13 13 13 13 13 14 14 14 14 14 14 15 15 15 15 15 15 16 16 16 16 Configuration Location of Controls Feature Button Descriptions Initial Setting Connection Handset/Headset Selection Display Contrast Control Speaker Volume Control Ringer Volume Control Station Programming Flexible Button Assignment Full One-Touch Dialling Setting Proprietary Telephone Features Basic Operation Absent Message Capa
Station Speed Dialling System Speed Dialling Timed Reminder Trunk (Exchange line) Answer from Any Station (TAFAS) Voice Mail Integration Feature Number List Installing the Card Holder DSS Console Features Location of Controls Connection DSS (Direct Station Selection) Buttons PF (Programmable Feature) Buttons Wall Mounting Cautions 16 16 16 17 17 18 19 20 20 20 21 21 22 23 4 Issue 2
Configuration___________________________ Location of Controls - KX-T7130E Display (Liquid Crystal Display) MESSAGE Button Programmable Function Buttons (F1 through F12) TRANSFER Button PROGRAM/PAUSE Button Flexible Exchange line Buttons (Exchange line 01 through Exchange line 12) AUTO DIAL/STORE Button AUTO ANSWER/MUTE Button INTERCOM Button CONF (Conference) Button FWD/DND Button REDIAL Button RECALL Button Card Holder with memory station card HOLD Button SP-PHONE Button Microphone 5 Issue 2
Configuration_______________________________ Configuration - KX-T7020E Programmable Function Buttons (F1 through F4) MESSAGE Button TRANSFER Button Flexible Exchange line Buttons (Exchange line 01 through Exchange line 12) PROGRAM/PAUSE Button AUTO DIAL/STORE Button INTERCOM Button AUTO ANSWER/MUTE Button CONF (Conference) Button REDIAL Button FWD/DND Button RECALL Button HOLD Button Microphone 6 SP-PHONE Button Issue 2
Configuration Configuration - KX-T7050E - Programmable Function Buttons (F1 through F4) MESSAGE Button TRANSFER Button RINGER Volume Selector PROGRAM/PAUSE Button Flexible Exchange line Buttons (Exchange line 01 through Exchange line 12) AUTO DIAL/STORE Button CONF (Conference) Button INTERCOM Button REDIAL Button RECALL Button HOLD Button 7 MONITOR Button Issue 2
Configuration Feature Button Descriptions AUTO ANSWER/MUTE Button Used for extension auto answer, it turns the microphone off during a conversation. PAUSE / PROGRAM Button Used to enter into Station Programming mode and to exit from Station Programming mode. Inserts a pause in speed dial numbers or in other numbers AUTO DIAL/STORE Button Used for System Speed Dialling and for storing program changes.
Initial Setting Connection (for KX-T7130E/KX-T7020E/KX-T7050E) Connect as shown. The included telephone line cord -> Connect to a Digital Super Hybrid System via a Secondary Socket. Handset/Headset Selection for KX-T7130E Set the HANDSET/HEADSET switch to either 1 HANDSET (Normal operation). 2 HEADSET (The SP-PHONE button operates the headset).
Station Programming Before programming, you need to enter into Programming mode. When the telephone is idle and Replace the handset or press SP-PHONE; Press : PAUSE 9 9 . To exit from Programming mode. Press : PAUSE . or Lift the handset. Flexible Button Assignment Press the desired Exchange line button. Dial 1 - 7 , + desired number (such as phone number or feature number, if required).
Proprietary Telephone Features Off-hook: Lift the handset or press the SPPHONE/MONITOR button. On-hook: Replace the handset or press the SPPHONE/MONITOR button. Fx: Press Function button “ x ” Pressing the MONITOR button can perform handsfree dialling operation. Absent Message Capability Helpful hints for Handsfree operation: There are nine flexible absent messages available. If you select a message, it will be shown on the display of the calling party's telephone.
Proprietary Telephone Features - No Answer All incoming calls are forwarded to another extension, if you don't answer the call. Alternate Calling -- Ring/Voice Allows you to select ring or voice calling when making an intercom call. In Ring-Calling mode, you can call the other party with a ring tone. While in Voice-Calling mode, you can talk to the other party immediately after a confirmation tone.
Proprietary Telephone Features - Group Pick up the handset or press SP-PHONE. Dial 40. - Confirmation tone is audible (optional). Talk. Call Hold Allows you to hold an extension or an outside call. Press the HOLD button. Retrieving (Intercom Call) - At the holding extension Press the INTERCOM button. - At another extension Off hook. Dial 51 + holding extension number. (Outside Call) - At the holding extension Press the green CO button that is slowly flashing.
Proprietary Telephone Features Conference Message Waiting Allows you to make a three-party conference. Allows you to leave a message for another extension. The message waiting lamp gives a visual indication that a message has been received. Setting When the called extension is busy or does not answer; Press MESSAGE button. - Confirmation tone is audible. Replace the handset or press SP-PHONE. Cancelling Pick up the handset or press SP-PHONE. Dial 700 + extension number . - Confirmation tone is audible.
Proprietary Telephone Features the external pagers can be answered by any extension in the system. Pick up the handset or press SP-PHONE. Dial 42 + external pager number (1-4) or 43 . - 42 + external pager number (1-4): To answer a page sent to the external pager/TAFAS. - 43 : To answer a page sent to the built-in speaker. - Confirmation tone is audible (optional). Talk. Paging Provides an announcement (page), through the built-in speaker of the telephone or by the external speakers.
Proprietary Telephone Features Pulse to Tone Conversion Station Speed Dialling Allows you to change from Pulse to Tone dialling mode. Dial phone number (Pulse mode). Dial * + # . Dial phone number (Tone mode). Each extension can store up to 10 speed dial numbers which are only available to that extension user. Storing phone numbers Pick up the handset or press SP-PHONE. Dial 60 . Dial the Station Speed Dial number (0-9). Dial the desired number *1 + # .
Proprietary Telephone Features Trunk (Exchange line) Answer from Any Station (TAFAS) Voice Mail Integration When you are busy or absent, your calls can be forwarded to a mail box of the Voice Processing System. Ringing through the external paging system indicates an incoming outside call. TAFAS allows this call to be answered from any extension. Setting Call Forwarding to Voice Processing System Pick up the handset or press SP-PHONE. Press FWD/DND (F3)* button.
Feature Number List This Manual uses the initial factory settings (default value) for feature descriptions. If you change the feature number, use the new one you programmed instead. Additional Required Digits are needed as follows.
Installing the Card Holder The KX-T7130E, KX-T7020E and KX-T7050E are equipped with a card holder with a memory station card. Follow the instructions below to install the card holder to the unit. 1 Match the marks the slide rails on the on the card holder and on unit. 2 Push two shaded portions slightly and insert the edges of the holder under the slide rails and then slide down in direction of arrow "A".
DSS Console Features With a Directed Station Selection (DSS) console, the KX-T7040E, you can call an extension, transfer calls and access system features with the touch of a button. The DSS Console must be connected to the Panasonic Digital Super Hybrid System and paired with a proprietary telephone. Note: System Programming is required to designate the jack numbers of the paired DSS Console and proprietary telephone.
DSS Console Features DSS (Direct Station Selection) Buttons PF (Programmable Feature) Buttons Use your paired telephone for the operation except for the DSS button. The initial factory settings for the DSS buttons are as follows: DSS 01-32 : extension numbers 201-232 Use your paired telephone for the operation except for the PF button. Press PAUSE button + 99 . Press a DSS button.
Wall Mounting 1 Remove the handset hook by pulling it toward the top of the unit. Turn it around and re-insert. (Except for the KX-T7040E.) 2 3 4 Place the stand on the centre line. 5 Mount the unit on the wall. Remove the attaching stand. To temporarily place the handset down during a conversation, hook it over the top edge of the phone as shown. (Except for the KX-T7040E.) Turn it around 180 degrees.
Cautions The apparatus is designed to be installed and operated under controlled conditions of ambient temperature and a relative humidity not greater than 60%. Avoid installing the apparatus in damp or humid environments, such as bathrooms or swimming pools. 999 or 112 can be dialled on the apparatus after accessing the Exchange line for the purpose of making outgoing calls to the BT emergency service. During dialling, this apparatus may tinkle the bells of other telephones using the same line.
