Digital Super Hybrid System KX-TD816E KX-TD1232E Added Features for User Manual In this manual, the last letter “E” of each model number is omitted.
Table of Contents Additional Features Section 2.2, Programming Flexible Button Assignment Night Button.................................................................................................................... 3 One-Touch Dialling with Auto Hold Button .................................................................. 4 Phantom Button .............................................................................................................. 5 Phantom Extension Bell On / Off Set..................
2.2 Station Programming Flexible Button Assignment Night Button (Assignment) Allows you to assign a Flexible (CO, DSS) button as a Night button. Pressing the Night button allows you to switch between the day mode and night mode. The button indicator turns on when the night mode is assigned and turns off when the day mode is assigned. — Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9]. 1 1. Press the desired Flexible (CO, DSS) button you wish to assign as the Night button.
2.2 Station Programming One-Touch Dialling with Auto Hold Button (Assignment) Allows you to assign a Flexible (CO, DSS, PF) button as an One-Touch Dialling with Auto Hold button. During a conversation, the call is put on hold and transferred to the assigned number. You can make a call to the assigned number by pressing this button as well as pressing the One-Touch dialling button. — Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9]. 1.
2.2 Station Programming Phantom Button (Assignment) Allows you to assign a Flexible (CO, DSS) button as the Phantom button. — Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9]. 1 1. Press the desired Flexible (CO, DSS) button which you wish to assign as the Phantom button. 2 2. Dial 88. • The display shows: 8 8 EXTCLR 3 3. Dial the phantom extension number.
2.2 Station Programming Phantom Extension Bell On / Off Set You can select whether or not the bell will ring when a call is received at a phantom extension. — Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9]. 1. Press the Phantom button. 1 2 2. Press the same Phantom button again. 3 1 4 or 2 3. Dial 1 or 2. – 1 : Ring off – 2 : Ring on AUTO DIAL STORE 4. Press the STORE button. • The STORE indicator light turns on.
2.2 Station Programming Ringing Tone Selection for Intercom Button Allows you to assign a ringer frequency to the intercom button. — Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9]. INTERCOM 1. Press the INTERCOM button which you wish to change the ringing tone. INTERCOM 2. Press the same INTERCOM button again. • The display shows the current status. 1 2 3. Enter the tone type number (1 through 8).
C 4.2 DPT Features Call Forwarding — to ISDN Line TD816 TD1232 ✔ ✔ DPT (72**) The call forwarding to ISDN line feature can be assigned to each extension. 30 35 50 There are the following three types: ✔ ✔ ✔ – Call Forwarding Unconditional (CFU): All incoming calls to an extension are transferred to an ISDN line. – Call Forwarding No Reply (CFNR): An incoming call to an extension is transferred to an ISDN line when the extension does not answer before a time that a telephone company assigns.
4.2 C DPT Features 7. Hang up or press the SP-PHONE button. 7 Cancelling (individually) 1. Lift the handset or press the SP-PHONE button. 1 2 FWD/DND 3 9 2 or 9 2. Press the FWD/DND button. • You may dial the feature number (710) instead. 3. Dial 92, 93 or 94. – 92 : CFU – 93 : CFB – 94 : CFNR 3 4. Dial 0. or 9 4 4 0 5. Dial your multi subscriber number (MSN) and press #. • You hear a confirmation tone and then a dial tone. • The display shows the assignment (example). CFU Cancel 5 6.
C 4.2 DPT Features Cancelling (all) 1 1. Lift the handset or press the SP-PHONE button. 2 2. Press the FWD/DND button. • You may dial the feature number (710) or press the flexible button assigned as the FWD/DND button instead. FWD/DND 3. Dial 90. 3 9 0 4. Dial your multi subscriber number (MSN) and press #. • You hear a confirmation tone and then a dial tone. 4 Your MSN + # 5. Hang up or press the SP-PHONE button.
4.2 C DPT Features Calling / Connected Line Identification Presentation (CLIP / COLP) TD816 TD1232 ✔ ✔ DPT (72**) 30 35 50 ✔ ✔ Allows you to display the calling party’s number on the LCD of the called party’s telephone when making a call (CLIP), or allows you to display the called party’s number on the LCD of the calling party’s telephone when answering a call (COLP). Condition • The number sent to the other party is assigned by system programming.
P 4.2 DPT Features Phantom Extension Allows you to route calls to a phantom extension. The call arrives at the extension which has the corresponding Phantom button. A flexible CO or DSS button can be assigned as the Phantom button. The lighting patterns of Phantom button and status are as follows: Off : Idle Red on : You are calling a phantom extension.
4.
C 6.2 SLT and ISDN Telephone Features Call Forwarding — to ISDN Line The call forwarding to ISDN line feature can be assigned to each extension. There are the following three types: – Call Forwarding Unconditional (CFU): All incoming calls to an extension are transferred to an ISDN line. – Call Forwarding No Reply (CFNR): An incoming call to an extension is transferred to an ISDN line when the extension does not answer before a time that a telephone company assigns.
6.2 SLT and ISDN Telephone Features C 7. On-hook. 7 Cancelling (individually) 1. Lift the handset. 1 2. Dial the feature number (710). 2 3. Dial 92, 93 or 94. – 92 : CFU – 93 : CFB – 94 : CFNR 3 or or 4. Dial 0. 5. Dial your multi subscriber number (MSN) and press #. • You hear a confirmation tone and then a dial tone. 4 6. On-hook.
C 6.2 SLT and ISDN Telephone Features Cancelling (all) 1. Lift the handset. 1 2. Dial the feature number (710). 2 3. Dial 90. 3 4. Dial your multi subscriber number (MSN) and press #. • You hear a confirmation tone and then a dial tone. 4 5. On-hook.
7 Quick Reference 2 Station Programming ❐ Flexible Button Assignment — Night Button • Press the PROGRAM button and dial 99. • Press the desired Flexible button. • Dial 8 . • Press the STORE button. • Press the PROGRAM button to exit or lift the handset. ❐ Ringing Tone Selection for Intercom Button • Press the PROGRAM button and dial 99. • Press the Intercom button. • Press the same Intercom button again. • Dial the tone type number (1 through 8). • Press the STORE button.
7 Quick Reference 4 DPT Features ❐ Call Forwarding — to ISDN Line Setting • Off-hook. • Press the FWD/DND button. • Dial 92, 93 or 94. – 92: CFU – 93: CFB – 94: CFNR • Dial 1. • Dial your MSN + #. • Dial the phone number + #. • On-hook. Cancelling (individually) • Off-hook. • Press the FWD/DND button. • Dial 92, 93 or 94. – 92: CFU – 93: CFB – 94: CFNR • Dial 0. • Dial your MSN + #. • On-hook. Cancelling (all) • Off-hook. • Press the FWD/DND button. • Dial 90. • Dial your MSN + #. • On-hook.
Printed in the United Kingdom PSQX1272ZA KK0797MT0
