Digital Super Hybrid System p Reference Guide Please read before using an MF4 or LD Telephone with the Digital Super Hybrid System
Table of Contents________________________ Feature Descriptions .............................................................................................................................. 3 Operating Instructions Basic Operation ......................................................................................................................... 5 Standard Operation ................................................................................................................... 5 Feature Numbers ....
Feature Descriptions Absent Message Capability There are nine flexible absent messages available. If you select a message it will be shown on the display of the calling party’s proprietary telephone. Conference Allows you to make a three way conference Do Not Disturb (DND) Allows you to prevent other people from disturbing you. Automatic Call-back Busy (Camp-On) When the selected Exchange line of extension you have dialled is busy, the dial camp-on code and hang up.
Feature Descriptions Redial Automatically saves the last outside number you dialled and allows you to dial the same number again. * These features must have previously been allowed through System Programming. See the Installation Manual of the Digital Super Hybrid System. Station Feature Clear Allows you to reset all the extension features you have set to the default settings. Station Speed Dialling Each extension can store up to 10 speed dial numbers which are only available to that extension.
Operating Instructions If you use a Loop Disconnect (LD) type single line telephone, it is not possible to use the features marked *. Message 7,8 or 9. (Programmable) Pick up the handset. Dial 7507 -7509. - 7507 : for Message 7 - 7508 : for Message 8 - 7509 : for Message 9 Enter parameters (if required). Replace the handset Making Calls Intercom Calling Pick up the handset. Dial extension number . Outward Dialling - Line Access, Automatic Pick up the handset.
Operating Instructions - Group Pick up the handset. Dial 40. - Confirmation tone is audible (optional). Talk. Call Hold Setting Press Register Recall button Dial 50 - Confirmation tone is audible. Replace the handset Retrieving (Intercom Call) - At the holding extension Pick up the handset. Dial 50. - At another extension (Exchange line call) Pick up the handset. Dial 53 + held exchange line number (01-24) (Intercom call) Pick up the handset Dial 51 + holding extension number.
Operating Instructions Do Not Disturb (DND) Setting Pick up the handset. Dial 7101. - Confirmation tone is audible. Replace the handset. Cancelling Lift the handset. Dial 7100. - Confirmation tone is audible. Replace the handset. Do Not Disturb (DND) Override Calling a DND extension Dial 2 . External Feature Access While having a conversation; Press Register Recall button. Dial 64 Dial the code for the desired service. Message Waiting Setting Pick up the handset. Dial 701 + extension number.
Operating Instructions Paging Pickup Dialling* - All* Pick up the handset. Dial 62 ( or 63 ) + *. - Confirmation tone is audible (optional). Announce. - External To access all external pagers Pick up the handset. Dial 620. - Confirmation tone is audible (optional). Announce. To access a particular pager Pick up the handset. Dial 62 + external pager number (1-4). - Confirmation tone is audible (optional). Announce. - Group To access all groups simultaneously Pick up the handset. Dial 6300 .
Operating Instructions Timed Reminder Voice Mail Integration Setting Pick up the handset. Dial 761 . Enter hour (01-12). Enter minute (00-59). Dial 0 or 1 . -0 : for AM -1 : for PM Dial 0 or 1 . -0 : for a one time alarm setting -1 : for a daily alarm setting Replace the handset. Cancelling Pick up the handset. Dial 760 . - Confirmation tone is audible. Replace the handset. Setting Call Forwarding to Voice Processing System Pick up the handset. Dial 710 + FWD number (2 - 5).
Feature Number List This Manual uses the initial factory settings (default value) for feature descriptions. If you change the feature number, use the new one you programmed instead.
Index F*1 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 Absent Message Capability Automatic Call-back Busy (Camp-On) Busy Station Signalling (BSS) Call Forwarding (FWD) Call Hold Call Park Call Pickup Call Transfer to Extension Call Waiting Conference Do Not Disturb (DND) Do Not Disturb (DND) Override External Feature Access Intercom Calling Line Access, Automatic Line Access, Exchange Line Group Message Waiting Paging Paging and Transfer Pickup Dialling Redial Station Feature Clear Station Speed D
Others If there is any trouble, unplug the extension line and connect a known working phone. If the known working phone operates properly, have the defective phone repaired by one of the specified Panasonic Factory Service Centres. If the known working phone does not operate properly, check the Digital Super Hybrid System and the Internal extension wiring. Do not use benzene, thinner, or the like, or any abrasive powder to clean the cabinet. Wipe it with a soft cloth.
