Operating instructions

Chapter 6Useful Information

Problem

The unit does not work.

You cannot program items such as the

time/day adjustment (p. 20).

The battery strength is not displayed

correctly.

“ ” flashes or the unit beeps every

15 seconds.

You charged the batteries fully, but

“ ” flashes.

The charge indicator ( ) light never

goes out while charging.

Remedy

• Turn the power ON (p. 14).

• Check the settings (p. 11–18).

• Charge the batteries fully (p. 13).

• Clean the charge contacts and charge again (p. 13).

• Unplug the AC adaptor and turn the power OFF to

reset. Plug in the AC adaptor and turn the power ON.

Then try again.

• The handset has been cancelled or has not been

registered. Register the handset (p. 64).

• Re-install the handset batteries and try again.

• Programming is not possible while the unit is in the

talk or intercom mode.

• Move closer to the base unit.

• Check that the battery type selection is correct

(p. 74).

• Charge the batteries fully (p. 13).

• Clean the charge contacts and charge again (p. 13).

• Install new batteries (p. 74, 81).

• This is normal.

General

KX-TCD965EC-6(74~84) 99.12.10 5:48 PM Page 79