Operating instructions

50
1 Press .
2 Press G or F until the arrow points to
“Program”.
3 Press OKH.
4 Press G or F until the arrow points to
“Setting Handset”.
5 Press OKH.
6 Press G or F until the arrow points to
“Range Alarm”.
F
7 Press OKH.
•The current setting is at the arrow.
8 Press G or F to select ON or OFF.
9 Press OKH.
•Aconfirmation tone sounds.
•The display will return to “Range
Alarm”. To return to the stand-by mode,
press or wait for 60 seconds.
C
•You can exit the programming mode any time
by pressing .
C
Other Programmable Settings
Setting the Key Tones
You can choose whether or not the handset keys will sound tones (key tone, confirmation tone, error
tone). The factory preset is ON.
6 While “Key Tone ON/OFF” is at the
arrow, press
OKH.
•The current setting is at the arrow.
7 Press G or F to select ON or OFF.
8 Press OKH.
•If ON is selected, a confirmation tone
sounds.
•The display will return to “Key Tone
ON/OFF”. To return to the stand-by mode,
press or wait for 60 seconds.
C
1 Press .
2 Press G or F until the arrow points to
“Program”.
3 Press OKH.
4 Press G or F until the arrow points to
“Setting Handset”.
5 Press OKH.
F
•You can exit the programming mode any time
by pressing .
C
H
Key Tone ON/OFF
Ringer Volume
Ringer Pattern
Call Waiting
H
Range Alarm
Battery Alarm
Setting the Range Warning Alarm
You can choose whether or not the handset will sound a range warning alarm. The factory preset is
OFF.
KX-TCD965EC-3(42~53) 99.9.27 8:02 PM Page 50