Operating instructions

46
10 New Calls
Direct Call
Direct Call
You can easily make a call using a stored direct call number by pressing . Incoming calls can
still be accepted.To use this feature, store the direct call number andturn on the mode by programming.
When the direct call mode is on, you can ONLY dial the number stored in the direct call memory.
The factory preset is OFF.
Setting the Direct Call Number and Mode
1 Press .
2 Press G or F until the arrow points to
“Program”.
3 Press OKH.
4 Press G or F until the arrow points to
“Call Option”.
5 Press OKH.
6 Press G or F until the arrow points to
“Direct Call No.”.
7 Press OKH.
8 Enter the phone number, up to 24 digits.
•If you misdial, press I. The digits are
erased from the right. To erase all digits,
press I firmly.
9 Press OKH.
F
To turn OFF/ON the direct call
mode
Follow steps 1 to 5. In step 6, press G or F
until the arrow points to “Direct
ON/OFF” then press
OKH. Press G or F
to select OFF or ON and press
OKH. When
finished, press .
•When set to off, “Direct Call” will go out.
C
Dialling the Stored Number
Make sure that “Direct Call” is displayed, then press .
•The number stored in the direct call memory is dialled automatically.
•When the handset is in “Direct Call” mode emergency calls can not be made until direct call is
cancelled.
10 While the arrow is at “Save”, press
OKH.
11 While the arrow is at “ON”, press OKH.
•Aconfirmation tone sounds.
•The display will return to “Direct Call
No.”.
12 Press to return to the stand-by
mode.
C
•You can exit the programming mode any time
by pressing .
C
<Enter Phone No>
KX-TCD965EC-3(42~53) 99.9.27 8:02 PM Page 46