Operating instructions

H
Cancel Base
Register H/set
Command Function item
5 To set the base unit password
(p. 45)
6 To set the call restricted
handset(s) and restriction
number(s) (p. 48)
7 To cancel a handset (p. 66)
0 To clear the base unit settings
(p. 53)
Chapter 3 Cordless Telephone (Advanced Operations)
43
To set the key tone (p. 50)
To select the handset ringer volume (p. 16)
To select the handset ringer pattern (p. 16)
To set the call waiting tone (p. 73)
To set the range warning alarm (p. 50)
To set the battery low alarm (p. 51)
To select the display language (p. 14)
To set the auto talk feature (p. 18)
To select the stand-by mode display (p. 67)
To select the talk mode display (p. 51)
To select the battery type (p. 74)
To set the call prohibition mode (p. 47)
To set the direct call number (p. 46)
To set the direct call mode (p. 46)
To cancel the base unit (p. 66)
To register a handset in the base unit (p. 64)
H
Key Tone ON/OFF
Ringer Volume
Ringer Pattern
Call Waiting
Range Alarm
Battery Alarm
Select Language
Auto Talk
H
Standby Display
Talk Display
Battery Type
H
Call Bar
Direct Call No.
Direct ON/OFF
Enter a desired function command as shown
below.
<Function menu>
*
<Function menu>*
Command Function item
1 To select the bell selection
(p. 68)
2 To select the base unit ringer
volume (p. 17)
To select the base unit ringer
pattern (p. 17)
3 To select the dialling mode
(p. 15)
To select the pause time (p. 39)
To select the earth/time break
recall mode (p. 41)
Input Command
KX-TCD965EC-3(42~53) 99.12.13 7:05 PM Page 43