Operating instructions

1 Press G or F until the desired name is
displayed.
•You can also search for the item by initial
(p. 36).
2 Press OKH.
3 While “Edit” is at the arrow, press
OKH.
•If you do not need to change the name, go
to step 5.
4 Edit the name using the dialling buttons,
, or , up to 16 characters
(p. 35).
5 Press OKH or G.
•If you do not need to change the number,
go to step 7.
F
37
Chapter 2 Cordless Telephone (Basic Operations)
H
Edit
Clear
Go Back
•You can exit the programming mode any time
by pressing .
C
6 Add a number to the current number.
•Pressing I erases the digit to the
left of the cursor. To erase all digits,
press I firmly.
7 Press OKH.
8 Press G or F to select private ring ON
or OFF, then press
OKH.
9 While “Save” is at the arrow, press
OKH.
•Aconfirmation tone sounds and “Saved”
is displayed.
Editing an Item in the Phonebook
5 Press G or F to select “YES”, then
press
OKH.
•Aconfirmation tone sounds and
“CLEARED” is displayed.
•After a few seconds, the display will show
the next item.
•To return to the stand-by mode, press
or wait for 60 seconds.
C
•You can exit the programming mode any time
by pressing .
C
Clearing an Item from the Phonebook
1 Press G or F until the desired name is
displayed.
•You can also search for the item by initial
(p. 36).
2 Press OKH.
3 Press G or F until the arrow points to
“Clear”.
4 Press OKH.
•“Clear ?” is displayed.
KX-TCD965EC-2(26~41) 99.9.27 8:03 PM Page 37