Operating instructions

23
Chapter 1 Preparation
Selecting the Caller’s Recording Time
You can select “1 minute”, “unlimited” or “greeting only” for the caller’s recording time. The factory
preset is “unlimited”.
1 Press .
2 Press
GG
or
FF
until the arrow points to
“Program”, then press OK
HH
.
3 Press
GG
or
FF
until the arrow points to
“Setting Base”, then press OK
HH
.
•“Input Command” is displayed.
4 Press .
•“Remote Operation” is displayed on
the handset.
•“
P
” is displayed on the base unit.
5 Press .
•The current setting is displayed on the
base unit.
1: 1 minute 2: unlimited 3: greeting only
6 Press , or to select the
recording time.
•The setting is displayed.
7 Press OK
HH
.
•If you select “greeting only”, “––” is
displayed on the base unit.
3
2
1
3
F
•You can exit the programming mode any time
by pressing .
C
If you select “greeting only”, the unit will
answer a call with the greeting message, and
then hang up. The unit will not record any
incoming messages.
KX-TCD965EC-1(2~25) 99.9.27 8:05 PM Page 23