Operating instructions

18
Settings
Setting the Auto Talk Feature
The Auto Talk feature allows you to answer a call by lifting the handset off the base unit without
pressing . If you want to use this feature, turn the feature ON. The factory preset is OFF.
In order to view Caller ID information before answering a call, leave the Auto Talk feature OFF.
Make sure that the power is ON (p. 14) and the unit is in the stand-by mode.
1 Press .
2 Press
GG
or
FF
until the arrow points to
“Program”, then press OK
HH
.
3 Press
GG
or
FF
until the arrow points to
“Setting Handset”, then press
OK
HH
.
4 Press
GG
or
FF
until the arrow points to
“Auto Talk”, then press OK
HH
.
•The current setting is at the arrow.
5 Press
GG
or
FF
to select ON or OFF.
6 Press OK
HH
.
•Aconfirmation tone sounds.
•The display will return to “Auto Talk”.
To return to the stand-by mode, press
or wait for 60 seconds.
C
F
•You can press to go to the next menu
instead of pressing
GG
.
•You can exit the programming mode any time
by pressing .
C
F
KX-TCD965EC-1(2~25) 99.9.27 8:05 PM Page 18