Operating instructions

Problem

The unit does not work.

You cannot program items such as the

time/day adjustment (p. 19).

The battery strength is not displayed

correctly.

“ ” flashes or the unit beeps every

15 seconds.

You charged the batteries fully, but

“ ” flashes.

The charge indicator ( )

light never goes out while charging.

Remedy

• Turn the power ON (p. 14).

• Check the settings (p. 11–17).

• Charge the batteries fully (p. 13).

• Clean the charge contacts and charge again (p. 13).

• Unplug the AC adaptor and turn the power OFF to

reset. Plug in the AC adaptor and turn the power ON.

Then try again.

• The handset has been cancelled or has not been

registered. Register the handset (p. 48).

• Re-install the handset batteries and try again.

• Programming is not possible while the unit is in the

talk or intercom mode.

• Move closer to the base unit.

• Check that the battery type selection is correct

(p. 57).

• Charge the batteries fully (p. 13).

• Clean the charge contacts and charge again (p. 13).

• Install new batteries (p. 57, 65).

• This is normal.

General

✂

KX-TCD961EB.6(57~68) 99.12.10 5:59 PM Page 63