Operating instructions

20
Preparing the Answering System
Time and Day Adjustment
Voice Time/Day Stamp: During playback, a synthesised voice will announce the time and day that
each message was recorded.
1 Press then .
2 Press .
•“ ” is displayed on the handset.
•“
P
” is displayed on the base unit.
3 Press .
•“ ” is displayed on the base unit.
•“
Set time ” is announced.
If previously adjusted, the time/day will be
heard.
4 Enter the current time (hour and minute)
using a 4-digit number. (Ex. To set 9:30,
enter “0930”.)
•The entered number is displayed on the
base unit.
5 Press to select “AM” or “PM”.
Press repeatedly to set the day.
•The unit announces the day.
6 Press .
•The unit announces the time/day.
The clock starts working.
PROG
0
INT
PROG
If a power failure occurs, the adjusted time/day
will be erased.
•In step 5, you cannot enter numbers greater
than 12. Do not use 24 hour clock.
(To set 13:00, enter “0100” and select “PM” by
pressing .)
•The accuracy of the clock is approximately
±45 seconds a month at room temperature.
To check the time/day
1 Press then .
2 Press .
3 Press .
•The current time/day is heard. When
finished, press .
PROG
0
INT
PROG
KX-TCD961EB.1(2~22) 99.9.27 7:37 PM Page 20