Operating instructions

50
Selecting the Stand-By Mode Display
You can choose whether to display the currently connected base unit number, handset number or no
display while in the stand-by mode.The factory preset is the base unit number.
1 Press .
2 Press G or F until the arrow points to
“Program”.
3 Press OKH.
4 Press G or F until the arrow points to
“Display Option”.
5 Press OKH.
6 While “Standby Display”is at the
arrow, press
OKH.
•The current setting is at the arrow.
7 Press G or F to select “Handset
Number”,“OFF” or “Base Number”.
8 Press OKH.
•A confirmation tone sounds.
•The display will return to “Standby
Display”.
F
9 Press to return to the stand-by
mode.
C
•You can exit the programming mode any time
by pressing .
C
Ex.“Handset Number” is selected.
Ex.“Base Number” is selected.
Ex.“OFF” is selected.
10 New Calls
INT.1
10 New Calls
Base 1
10 New Calls
H
Standby Display
Talk Display
KX-TCD955EC(048~055) 99.6.16 5:25 PM Page 50