Operating instructions

42
Clearing the Settings in Memory
On the handset
This function enables the handset to clear the following settings at one time.They will return to their
initial settings.
1 Press .
2 Press G or F until the arrow points to
“Program”.
3 Press OKH.
4 Press G or F until the arrow points to
“Reset Handset”.
5 Press OKH.
F
6 Enter the handset password (p. 34).
•“Reset handset?” is displayed.
7 Press G or F to select “YES”.
8 Press OKH.
•A confirmation tone sounds and
“CLEARED” is displayed.
•The display will return to “Reset
Handset”.To return to the stand-by
mode, press or wait for 60 seconds.
C
•You can exit the programming mode any time
by pressing .
C
H
Reset Handset
Setting Base
Enter H/set PIN
12345678900:
----
Call prohibition OFF
Direct call mode OFF
Direct call number Clear
Handset password 0000
Handset receiver volume MEDIUM
Redial memory All clear
Display language English
Auto talk OFF
Function Initial setting
Base unit access Automatic base
unit access
Key tones ON
Handset ringer volume 3 (MEDIUM)
Handset ringer pattern 1
Call waiting tone ON
Range warning alarm OFF
Battery low alarm ON
Stand-by mode display Base unit number
Talk mode display Length of the call
Function Initial setting
KX-TCD955EC(038~047) 99.6.28 4:27 PM Page 42