Operating instructions

41
Chapter 3
Advanced Operations
Setting the Battery Low Alarm
You can choose whether or not the handset will sound a battery low alarm.The factory preset is ON.
1 Press .
2 Press G or F until the arrow points to
“Program”, then press
OKH.
3 Press G or F until the arrow points to
“Setting Handset”, then press
OKH.
4 Press G or F until the arrow points to
“Battery Alarm”, then press
OKH.
•The current setting is displayed.
F
5 Press G or F to select ON or OFF.
6 Press OKH.
•A confirmation tone sounds.
•The display will return to “Battery
Alarm”.To return to the stand-by mode,
press or wait for 60 seconds.
C
•You can exit the programming mode any time
by pressing .
C
1 Press .
2 Press G or F until the arrow points to
“Program”, then press
OKH.
3 Press G or F until the arrow points to
“Display Option”, then press
OKH.
4 Press G or F until the arrow points to
“Talk Display”, then press
OKH.
•The current setting is at the arrow.
Talk Time: Length of the call
Phone No.: Dialled phone number
5 Press G or F to select “Phone No.”
or “Talk Time”, then press
OKH.
•A confirmation tone sounds.
•The display will return to “Talk
Display”.To return to the stand-by
mode, press or wait for 60 seconds.
C
F
“Phone No.” is selected.
(Ex:123-456-7890)
Selecting the Talk Mode Display
You can choose whether to display the length of the call or the dialled telephone number while in the
talk mode.The factory preset is the length of the call.
•You can exit the programming mode any time
by pressing .
C
During a conversation, the display will be as
follows.
“Talk Time” is selected.
(Ex:1 hour, 30 minutes, 40 seconds.)
1234567890
01-30-40
KX-TCD955EC(038~047) 99.6.16 5:24 PM Page 41