Operating instructions

<Enter Phone No>
1 Press .
2 Press G or F until the arrow points to
“Program”.
3 Press OKH.
4 Press G or F until the arrow points to
“Call Option”.
5 Press OKH.
6 Press G or F until the arrow points to
“Direct Call No.”.
7 Press OKH.
8 Enter the phone number, up to 24 digits.
•If you misdial, press I.The digits are
erased from the right.To erase all digits,
press I firmly.
9 Press OKH.
F
You can easily make a call using a stored direct call number by pressing .Incoming calls are
accepted.To use this feature, store the direct call number and turn on the mode by programming.
The factory preset is OFF.
Setting the Direct Call Number and Mode
36
10 New Calls
Direct Call
Direct Call
To turn OFF/ON the direct call
mode
Follow steps 1 to 5. In step 6, press G or F
until the arrow points to “Direct
ON/OFF”.Then press G or F to select
OFF or ON and press
OKH.When finished,
press .
•When set to off, “Direct Call” will go
out.
C
Dialling the Stored Number
Make sure that “Direct Call” is displayed, then press .
•The number stored in the direct call memory is dialled automatically.
10 While the arrow is at “Save”, press
OKH.
11 While the arrow is at “ON”, press OKH.
•A confirmation tone sounds.
•The display will return to “Direct
Call No.”.
12 Press to return to the stand-by
mode.
C
•You can exit the programming mode any time
by pressing .
C
KX-TCD955EC(032~037) 99.6.16 5:24 PM Page 36