Operating instructions

32
H
Select Base
Setting Handset
Display Option
Call Option
Change Hset PIN
Receiver Volume
Registration
Clear Redial
Reset Handset
Setting Base
Redial
Caller ID
New Phonebook
H
Program
Go Back
Summary of Programmable Functions
You can program the following function items using the handset near the base unit.The display
shows the instructions.See the corresponding pages for function details.
Make sure that the power is ON (p. 12) and the unit is in the stand-by mode.
<Stand-by mode>
<Function menu>
*
Press .
F
Press
OKH.
To select the base unit
access (p.46)
To set the handset
password (p. 34)
To select the receiver
volume (p.16)
To clear the handset
settings (p. 42)
•You can exit the programming mode any time by pressing .
•When programming is completed, a confirmation tone sounds.
C
To clear the redial
memory (p. 17)
While programming:
*
To select a desired function item, press G or F until the arrow points to the item.Then press OKH
to go to the next step.
•You can press to go to the next menu of the function menu instead of pressing G.
F
<Function menu>*
12 New Calls
Base 1
•To return to the previous step during programming, press I.
KX-TCD955EC(032~037) 99.6.16 5:24 PM Page 32