Operating instructions

31
Chapter 2
Basic Operations
9 To select “Earth”, press .
OR
To select “Time break recall”, press .
10 Press OKH.
•A confirmation tone sounds.
•The display will return to “Setting
Base”.To return to the stand-by mode,
press or wait for 60 seconds.
C
1
2
1 Press .
2
Press G or F until the arrow points to
“Program”.
3 Press OKH.
4 Press G or F until the arrow points to
“Setting Base”.
5 Press OKH.
•“Input Command” is displayed.
6 Press .
7 Enter the base unit password (p. 35).
•The factory preset is 0000.
8 Press .
•The current mode is displayed.
1:Time break recall 2: Earth
2
3
F
Selecting the earth (option)/time break recall mode
The earth relay can be installed as an option depending on your PBX requirements. Please consult
your nearest Panasonic Service Centre for installation.Then you can select the time break recall or
earth mode.The factory preset is the time break recall.
Make sure that the power is ON (p. 12) and the unit is in the stand-by mode.
•If 5 beeps sound in step 7, the entered
password is incorrect.Enter the correct
password.
•You can exit the programming mode any time
by pressing .
C
Ex.Time break recall is selected.
Input Command
32 1
KX-TCD955EC(024~031) 99.6.16 5:24 PM Page 31