Operating instructions

28
H
Pause
Go Back
Ex. Line access number (PBX)
# Press .
$ Press and press OKH to select “Pause”.
% Enter a phone number.
F
9
9
Special Features
1 Press .
2 Press G or F until the arrow points to
“Program”, then press
OKH.
3 Press G or F until the arrow points to
“Setting Base”, then press
OKH.
•“Input Command” is displayed.
4 Press .
5 Enter the base unit password (p. 35).
•The factory preset is 0000.
3
F
6 Press .
•The current timing is displayed.
1:3 seconds 2:5 seconds
7 To select 5 seconds, press .
OR
To select 3 seconds, press .
8 Press OKH.
•A confirmation tone sounds.
•The display will return to “Setting
Base”.To return to the stand-by mode,
press or wait for 60 seconds.
C
1
2
3
How to Use the Pause Feature
(For Analog PBX Line/Long Distance Service Users)
We recommend you insert “Pause” if a pause is required for dialling with a PBX or to access a long
distance service.
•Selecting “Pause” creates a pause.“P” is displayed.
This prevents misdialling when you redial or dial a stored number.
•Selecting “Pause” more than once increases the length of the pause between numbers.
Setting the pause timing
You can set the pause timing to 3 seconds or 5 seconds, depeding on your PBX requirements.The
factory preset is 3 seconds.
Make sure that the power is ON (p. 12) and the unit is in the stand-by mode.
9
9P1234567
Ex.3 second is selected.
Input Command
33 1
KX-TCD955EC(024~031) 99.6.16 5:24 PM Page 28