Operating instructions

14
Settings
Ringer Volume
LOW HIGH
1
Press .
2 Press G or F until the arrow points to
“Program”, then press
OKH.
3 Press G or F until the arrow points to
“Setting Handset”, then press
OKH.
4 Press G or F until the arrow points to
“Ringer Volume”, then press
OKH.
•The current volume is displayed and rings.
5 Press G or F to select the desired
level.
•Each time you press a button, the selected
volume is displayed and rings.
F
Selecting the Handset Ringer Volume/Pattern
You can program the desired handset ringer volume and pattern.
Make sure that the power is ON (p. 12) and the unit is in the stand-by mode.
•You can press to go to the next menu
instead of pressing G.
•You can exit the programming mode any time
by pressing .
C
F
Ringer volume
7 levels are available.The lowest level is 1.The
highest level is 6.The factory preset is 3.When
set to OFF, the handset will not ring.
Ringer pattern
You can program the desired handset ringer
pattern (6 patterns).The factory preset is
pattern 1.
6 Press OKH.
•A confirmation tone sounds.
•The display will return to “Ringer
Volume”.To return to the stand-by
mode, press or wait for 60 seconds.
•When set to OFF, “Ringer Off”will
be displayed.
C
•To set to OFF, erase “ ”by pressing G
until “OFF” is displayed.
1 Follow steps 1 to 3 of the ringer volume
procedures.
2 Press G or F until the arrow points to
“Ringer Pattern”.
3 Press OKH.
•The current ringer pattern is at the arrow
and rings.
4 Press G or F to select the desired
pattern.
•Each time you press a button, the selected
ringer pattern will sound.
5 Press OKH.
•A confirmation tone sounds.
•The display will return to “Ringer
Pattern”.To return to the stand-by
mode, press or wait for 60 seconds.
C
Ringer Pattern
H
Ringer 1
Ringer 2
KX-TCD955EC(008~015) 99.6.16 5:23 PM Page 14