KX-TCD953EB(001~007) 4.25.2000 1:46 PM Page 1 Digital Cordless Phone Model No. KX-TCD953EB Operating Instructions ALL REC INT' OK C GHI RDL PROG GH I 1 ABC JK L 4 PQRS DE F 5 MNO 8 WXYZ 1 4 JK L PQRS 7 3 2 AB C TU V 2 DEF MNO 5 TUV 7 3 CEL CAN 6 WXYZ 8 SE PAU IAL/ RED 9 MUTE 0 S TA L P- PHONE I ID DIG LER CAL CT SELE 6 9 0 PWR RCL PLEASE READ BEFORE USE AND SAVE. Caller ID Compatible Charge the batteries for about 4 hours before initial use.
KX-TCD953EB(001~007) 4.25.2000 1:46 PM Page 2 Important Information Do not connect the AC adaptor to any AC outlet other than the standard AC 230–240 V, 50 Hz. • Outlet voltage DC1 8 V, 300 mA Outlet voltage DC2 9 V, 200 mA • The apparatus is approved for use with the KX-TCA9E or KX-TCA11E power supply. • CAUTION: Do not remove cover. Live parts inside.
KX-TCD953EB(001~007) 4.25.2000 1:46 PM This cordless telephone has been designed to operate on radio frequencies which have been assigned to the exclusive use of cordless telephones. As the use of cordless telephones becomes more widespread users may experience a reduction in the quality of service obtainable from this apparatus. 999 or 112 can be dialled on the apparatus for the purposes of making outgoing calls to the Emergency Service.
KX-TCD953EB(001~007) 4.25.2000 1:46 PM Page 4 Before Initial Use Thank you for purchasing your new Panasonic digital cordless telephone. If you require assistance please contact our customer care helpline on Tel. No. : 08701 578577 Caller ID, where available, is a telephone company service. After subscribing to Caller ID, this phone will display the caller’s phone number.
KX-TCD953EB(001~007) 4.25.2000 1:46 PM Page 5 For Best Performance Battery Charge Rechargeable Ni-Cd batteries power the handset. Install the batteries (p. 11) and charge them for about 4 hours before initial use (p. 13). Base Unit Location Calls are transmitted between the base unit and the handset using wireless radio waves.
KX-TCD953EB(001~007) 4.25.2000 1:46 PM Page 6 Contents Chapter 1 Preparation Intercom..........................................27 Transfering a Call Using the Intercom .................................28 Location of Controls ......................8 Special Features ...........................29 Display ...........................................10 How to Use the Pause Feature (For Analog PBX Line/Long Distance Service Users) ..............29 Settings ..........................................
KX-TCD953EB(001~007) 4.25.2000 1:46 PM Page 7 Chapter 5 Multi-Unit User Operations Useful Information For Optional Multi-Unit Users.......40 Replacing the Batteries.................51 Operating More than One Handset ........................................40 Safety Instructions ........................56 Operating More than One Base Unit ...............................................40 Registering a Handset in the Base Unit ......................................
KX-TCD953EB(008~018) 4.25.2000 1:50 PM Page 8 Location of Controls Base unit CALLER ID Indicator (p. 22) Volume Buttons Charge Contacts (p. 12) , (p. 20) Antenna CALL ER ID GH PQR S 1 AB I 4 JK 7 MN O 8 0 L C 2 DE 5 TU F 3 V 6 WXY Z 9 REC ALL CAN CEL RECALL Button (p. 29) RED IAL/P AUS E MUT E SELE CANCEL Button (p. 20) CT D I G I TA LS PH P- ONE REDIAL/PAUSE Button (p. 20, 29) MUTE Button and Indicator (p. 21) Locator/Intercom Butto (p.
KX-TCD953EB(008~018) 4.25.2000 1:50 PM Page 9 Handset Chapter 1 Talk Button Navigator Key F, G (p. 15, 20, 26, 32) (p. 19, 20) Intercom Button INT (p. 27, 47) Cancel Button C (p. 19, 20, 26, 32, 33) INT' C Program Button PROG (p. 15, 26, 28, 32) Preparation Display (p. 10) OK Button OK (p. 15, 32) OO K K PROG RDL GHI PQRS 1 ABC 2 DEF 4 JKL 5 MNO 6 7 TUV 8 WXYZ 9 3 Redial/Pause Button RDL (p. 20, 29) 0 Recall Button RCL (p. 31) RCL PWR Power Button PWR (p.
KX-TCD953EB(008~018) 4.25.2000 1:50 PM Page 10 Display (The display shows all possible configurations.) Icons The direct call icon is displayed when this mode is turned on (p. 34). The in range icon indicates that the handset is in range of the base unit. It flashes when the handset is out of range. The call prohibition icon is displayed when this mode is turned on (p. 35). The page/intercom icon is displayed when paging or using the intercom. It flashes when another unit pages the handset.
KX-TCD953EB(008~018) 4.25.2000 1:50 PM Page 11 Settings Installing the Batteries in the Handset Chapter 1 Install the batteries as shown. Then install the handset cover. Preparation • If the rechargeable batteries are not inserted correctly, the handset will not work. Using the Belt Clip You can hang the handset on your belt or pocket using the belt clip.
KX-TCD953EB(008~018) 4.25.2000 1:50 PM Page 12 Settings Connections Plug in the AC adaptor and the telephone line cord to the bottom of the unit. Then connect the cords as shown. Fasten the cords to prevent them from being disconnected. Hooks To Mains Outlet (AC 230–240V, 50 Hz) 8V AC Adaptor 9V Telephone AC Line Cord Adaptor Telephone Line Cord * The abbreviation TNV means “Telephone Network Voltage”. To B.T. Socket TNV* • USE ONLY WITH Panasonic AC ADAPTOR KX-TCA11E.
KX-TCD953EB(008~018) 4.25.2000 1:50 PM Page 13 Battery Charge • The charge indicator ( Chapter 1 At the time of shipment, the batteries are not charged. To charge, place the handset on the base unit. Please charge the batteries for about 4 hours before initial use. OR ) lights. ) You can check the present battery strength on the display.
KX-TCD953EB(008~018) 4.25.2000 1:50 PM Page 14 Settings Turning the Power ON Display Power Button PWR Press PWR firmly. • After all possible configurations briefly appear, the display will change to the following. Then the handset is in the stand-by mode. The current connected base unit number is displayed. - i- 00 • You can choose whether to display the base unit number, handset number or no display in the stand-by mode by programming (p. 44).
KX-TCD953EB(008~018) 4.25.2000 1:50 PM Page 15 Selecting the Handset Ringer Volume/Pattern Ringer pattern 7 levels are available. The lowest level is 1. The highest level is 6. The factory preset is 3. When set to OFF, the handset will not ring. You can program the desired handset ringer pattern (6 patterns). The factory preset is pattern 1. 1 Press PROG . F iU 2 Press G or F until “F22 ” is displayed. 3 Press OK . 1 Press PROG . 2 Press G or F until “F23 ” is displayed. 3 Press OK .
KX-TCD953EB(008~018) 4.25.2000 1:50 PM Page 16 Settings Selecting the Base Unit Ringer Volume/Pattern You can program the desired base unit ringer volume and pattern. Make sure that the power is ON (p. 14) and the unit is in the stand-by mode. Ringer volume Ringer pattern 4 levels (HIGH, MEDIUM, LOW) are available. The factory preset is MEDIUM. When set to OFF, the base unit will not ring. You can program the desired base unit ringer pattern (6 patterns). The factory preset is pattern 1.
KX-TCD953EB(008~018) 4.25.2000 1:50 PM Page 17 Setting the Key Tones On the handset On the base unit You can choose whether or not the handset keys will sound tones (key tone, confirmation tone, error tone). The factory preset is ON. You can choose whether or not the base unit keys will sound tones. The factory preset is ON. Press PROG . 2 Press G or F until “F2 i ” is displayed, then press OK . • The current setting is displayed. 1: ON 0: OFF 1 Press PROG then INT . 2 Press 2 then 1 .
KX-TCD953EB(008~018) 4.25.2000 1:50 PM Page 18 Settings Setting the Auto Talk Feature The Auto Talk feature allows you to answer a call by lifting the handset off the base unit without pressing . If you want to use this feature, turn the feature ON. The factory preset is OFF. In order to view caller’s phone number before answering a call, leave the Auto Talk feature OFF. Make sure that the power is ON (p. 14) and the unit is in the stand-by mode. 1 Press PROG .
KX-TCD953EB(019~031) 4.25.2000 1:53 PM Page 19 Making Calls With the Handset Make sure that the power is ON (p. 14). 1 2 Press . Dial a phone number. • The dialled number is displayed. • After a few seconds, the display will start showing the length of the call. 3 To hang up, press or place the handset on the base unit. 3 levels (HIGH, MEDIUM, LOW) are available. The factory preset is MEDIUM. While talking, press F or G to select the desired level. Ex. LOW is selected.
KX-TCD953EB(019~031) 4.25.2000 1:53 PM Page 20 Making Calls To redial the last number dialled Press ➡ 3 Press . • The number is dialled automatically. RDL . • The last number dialled is automatically redialled. To redial after confirming the numbers in redial memory The unit automatically stores the last 10 numbers dialled into redial memory. 1 To clear all of the numbers in the redial memory 1 Press PROG . 2 Press G or F until “ then press OK . Press RDL .
KX-TCD953EB(019~031) 4.25.2000 1:53 PM Page 21 Hands-Free Digital Speakerphone The digital speakerphone enhances your telephone conversation. For best performance, please note the following. • Use the speakerphone in a quiet room. • Speak alternately with the caller. • If the caller complains that your voice is hard to hear, press to decrease the speaker volume. • If the other party’s voice from the speaker cuts in/out during a conversation, press to decrease the speaker volume.
KX-TCD953EB(019~031) 4.25.2000 1:53 PM Page 22 Caller ID Service This unit is compatible with a Caller ID service offered by your telephone company. After subscribing to a Caller ID service, the calling party’s phone number will be displayed after the first ring. The unit can record the phone numbers of up to 50 different callers in the Caller List. Using this list, you can automatically call back a caller.
KX-TCD953EB(019~031) 4.25.2000 1:53 PM Page 23 Using the Caller List Viewing the Caller List Telephone numbers of up to 50 different callers are stored from the most recent to the oldest call in the Caller List. When the 51st call is received, the oldest call is deleted. To check the caller’s phone number, follow the steps below. Make sure that the power is ON (p. 14) and the unit is in the stand-by mode. 1 Press G or F. • The most recent caller’s phone number is displayed.
KX-TCD953EB(019~031) 4.25.2000 1:53 PM Page 24 Using the Caller List Calling Back from the Caller List 1 Press PROG then I NT . 2 Press F or G. • The most recent caller’s information is displayed. 3 4 Press . • The displayed phone number is dialed automatically. 5 Press G or F until the desired caller number is displayed. To hang up, press or place the handset on the base unit. • The handset will return to the stand-by mode.
KX-TCD953EB(019~031) 4.25.2000 1:53 PM Page 25 Clearing a Caller’s Phone Number in the Caller List You can clear caller’s phone numbers in the Caller List. Make sure that the power is ON (p. 14) and the unit is in the stand-by mode. Press PROG then I NT . 4 Press PROG . 2 Press F or G. 5 Press and hold C . • A confirmation tone sounds. • The displayed number is cleared and the next caller’s phone number is displayed. • The most recent caller’s phone number is displayed.
KX-TCD953EB(019~031) 4.25.2000 1:53 PM Page 26 Speed Dialling Storing Phone Numbers in Memory You can store up to 20 telephone numbers in the handset. Make sure that the power is ON (p. 14) and the unit is in the stand-by mode. 1 Press G or F until a desired memory station number (00 to I ) is displayed. • You can enter the desired memory station number after pressing G or F. 00 - • If a pause is required for dialling, press RDL where needed. Pressing RDL counts as one digit (p. 29).
KX-TCD953EB(019~031) 4.25.2000 1:53 PM Page 27 Intercom A 2-way intercom is available between the handset and the base unit. Paging the base unit from the handset 1 Handset: Press I NT , then 0 . 2 3 1 Base unit: Press . • The handset rings for 1 minute and “ flashes. • To stop paging, press again. or DIGITAL SP-PHONE Base unit: Talk into the MIC. 2 Handset or Base unit: To end the intercom, press , or DIGITAL SP-PHONE . 3 Base unit: Talk into the MIC.
KX-TCD953EB(019~031) 4.25.2000 1:53 PM Page 28 Intercom Trasferring a Call Using the Intercom The intercom can be used during a call. This feature enables you to transfer a call between the handset and the base unit. From the handset to the base unit 1 Handset: During a call, press I NT then 0 . • The call is put on hold and “ ” is displayed. • If the base unit user does not answer, press I NT . 2 3 Base unit: Press or DIGITAL SP-PHONE to answer the page. Transffering a call: Handset: Press .
KX-TCD953EB(019~031) 4.25.2000 1:53 PM Page 29 Special Features How to Use the Pause Feature (For Analog PBX Line/Long Distance Service Users) We recommend you press RDL on the handset or REDIAL/PAUSE on the base unit if a pause is required for dialling with a PBX or to access a long distance service. Ex: Line access number 9 (PBX) 9 ➡ RDL or REDIAL/PAUSE ➡ Phone number Chapter 2 • Pressing RDL or REDIAL/PAUSE once creates a pause.
KX-TCD953EB(019~031) 4.25.2000 1:53 PM Page 30 Special Features Setting the Key Lock You can lock the handset dialling buttons. Only incoming calls are accepted until the key lock is cancelled. You can answer a call by pressing any button 0 to 9 , or . When the unit is in the stand-by mode, press and hold PROG until a beep sounds. •“ ” is displayed and all dialling buttons are locked. To cancel the key lock When the unit is in the stand-by mode, press and hold PROG for about 2 seconds.
KX-TCD953EB(019~031) 4.25.2000 1:53 PM Page 31 Using the Recall Feature RCL on the handset or RECALL on the base unit is used to access special telephone services (optional) such as call waiting. Contact your telephone company business office for details. Example: British Telecom call waiting When a call waiting tone is heard during a conversation: a) To hold the existing call and accept the waiting call Press RCL or RECALL .
KX-TCD953EB(032~041) 4.25.2000 1:54 PM Page 32 Summary of Programmable Functions You can program the following function items using the handset near the base unit. See the corresponding pages for function details. Make sure that the power is ON (p. 14) and the unit is in the stand-by mode. - i- 00 Press G or F until a desired function code is displayed, then press OK . Press PROG . Press PROG then I NT .
KX-TCD953EB(032~041) 4.25.2000 1:54 PM Page 33 Setting the Password You can program a 4-digit password for both the handset and base unit individually. Factory preset for both the handset and the base unit is 0000. Changing the password may prevent the unauthorised use of your unit by another person. Once you have programmed the password, you cannot confirm it. We recommend you write down the password. If you forget it, please consult your nearest Panasonic Service Centre.
KX-TCD953EB(032~041) 4.25.2000 1:54 PM Page 34 Direct Call You can store a number in the direct call memory. This feature allows you to make a call easily by pressing . Incoming calls are accepted. Setting the Direct Call Mode After storing the direct call number, the unit will automatically switch to the direct call mode. When the direct call mode is on, you can ONLY dial the number stored in the direct call memory. 1 Press PROG . 2 Press G or F until “F42 ” is displayed. 3 Press OK .
KX-TCD953EB(032~041) 4.25.2000 1:54 PM Page 35 Call Prohibition You can prohibit anyone from making a call with your handset except for emergency calls (999, 112). Incoming calls are accepted. To use this feature, turn on the call prohibition mode by programming. The factory preset is OFF. 1 Press PROG . 2 Press G or F until “F4 i ” is displayed. 3 Press OK . To turn OFF the call prohibition mode Press G or F to select OFF in step 5. • You can press 0 to select OFF. •“ ” will go out.
KX-TCD953EB(032~041) 4.25.2000 1:54 PM Page 36 Call Restriction You can restrict desired handset(s)/base unit from dialling selected phone numbers. Phone numbers beginning with the restricted digits cannot be dialled out. For example, if “00” is assigned as the call restriction number, international calls cannot be made. For selected handset(s)/base unit, you can assign up to 6 call restriction numbers (up to 8 digits).
KX-TCD953EB(032~041) 4.25.2000 1:54 PM Page 37 Other Programmable Settings Setting the Battery Low Alarm Setting the Range Warning Alarm You can choose whether or not the handset will sound a battery low alarm. The factory preset is ON. You can choose whether or not the handset will sound a range warning alarm. The factory preset is OFF. 1 Press PROG . 1 Press PROG . 2 Press G or F until “F26 ” is displayed, then press OK . 2 Press G or F until “F25 ” is displayed, then press OK .
KX-TCD953EB(032~041) 4.25.2000 1:54 PM Page 38 Other Programmable Settings Selecting the Talk Mode Display You can choose whether to display the length of the call or the dialled telephone number while in the talk mode. The factory preset is the length of the call. 1 Press PROG . 2 Press G or F until “F32 ” is displayed, then press OK . • The current setting is displayed. 1: Length of the call 0: Dialled phone number Ex. Length of the call is selected.
KX-TCD953EB(032~041) 4.25.2000 1:54 PM Page 39 Clearing the Settings in Memory This function enables the handset or base unit to clear the following settings at one time. They will return to their initial settings.
KX-TCD953EB(042~045) 4.25.2000 1:55 PM Page 40 For Optional Multi-Unit Users Operating More than One Handset You can register and operate up to 6 handsets at the base unit. Operating more than one handset allows you to have an internal call while simultaneously conducting an external phone call using another handset. Radio Range H3 H2 H1 Ex. 6 optional handsets are added to a base unit. Handset 1 is engaged in an internal call with handset 3. Handset 2 is engaged in an external call.
KX-TCD953EB(042~045) 4.25.2000 1:55 PM Page 41 Registration Registering a Handset in the Base Unit You must register the handset in the base unit before use. • Charge the optional handset batteries for about 4 hours before initial use. • Make sure that the power is ON (p. 14) and the unit is in the stand-by mode. • Register the handset number within 1 minute. If not registered within 1 minute, press PROG on the handset to cancel the programming mode. Then start again from step 1.
KX-TCD953EB(042~045) 4.25.2000 1:55 PM Page 42 Registration Selecting the Base Unit Access Automatic base unit access The handset automatically selects a registered base unit. • When the handset moves to another base unit radio area, it loses contact with the previous base unit and automatically accesses the new base unit. • If the handset is in the overlap area between several base unit radio areas, the handset will access a base unit in the order of the base unit numbers.
KX-TCD953EB(042~045) 4.25.2000 1:55 PM Page 43 Cancelling a Handset Cancelling a base unit Each handset can cancel itself or another handset. If another handset is out of range and/or its power is OFF when “Cancelling a Handset”, the previous base unit number will still remain in the cancelled handset. Therefore, you need to cancel the base unit registered in the cancelled handset. 1 Press PROG then I NT . 2 Press 7 . 3 Enter the base unit password (p. 33). 1 Press PROG .
KX-TCD953EB(042~045) 4.25.2000 1:55 PM Page 44 Selecting the Stand-by Mode Display You can choose whether to display the currently connected base unit number, handset number or no display while in the stand-by mode. The factory preset is the base unit number. 1 Press PROG . 2 Press G or F until “F3 i ” is displayed, then press OK . • The current setting is displayed. 1: Base unit number 2: Handset number 0: No display 3 Press G or F to select the desired setting.
KX-TCD953EB(042~045) 4.25.2000 1:55 PM Selecting first handset One handset will ring first, then all other handsets will ring if the first handset is not answered. You can choose which handset will ring first and the ring count (1 to 6) until all handsets ring. The factory preset is 3 rings. Press PROG then I NT . 2 Press 1 . 3 Enter the base unit password (p. 33). • The current setting is displayed. 1: All handsets 2: Specified handset(s) 3: First handset 4 Press 3 .
KX-TCD953EB(046~056) 4.25.2000 1:56 PM Page 46 Paging/Intercom Intercom between the Handset(s) and the Base Unit A 2-way intercom is available between one of the handsets and base unit when another handset is not having an outside call. The base unit user can page the handset users individually or at one time. Paging all the handsets from the base unit (All paging) Paging a handset from the base unit (Individual paging) The base unit user can talk with the handset user who answered the page first.
KX-TCD953EB(046~056) 4.25.2000 1:56 PM Page 47 Transferring a Call Using the Intercom The intercom can be used during a call. This feature enables you to transfer a call between a handset and the base unit. From the base unit to a handset 1 Base unit: During a call, press INTERN and enter the handset number you want to page, then press . 3 Handset: Press Multi-Unit User Operations • The transfer is completed. Handset can answer the call. • The call is put on hold.
KX-TCD953EB(046~056) 4.25.2000 1:56 PM Page 48 Paging/Intercom Transferring a Call from One Handset to Another The intercom can be used during a call, enablings you to transfer a call between handsets registered to the same base unit. Transferring a call using the intercom Transferring a call without the intercom Ex. Handset 1 is transferring a call to Handset 2. This feature enables you to transfer the call to another handset without waiting for the paged handset to answer.
KX-TCD953EB(046~056) 4.25.2000 1:56 PM Page 49 Conference During a call using the handset, you can make an intercom call to another handset and then combine the calls together to establish a conference call between handsets registered to the same base unit. 1 Handset 1: During a call, press I NT . Then enter the desired handset number. • The call is put on hold. • If there is no answer, press I NT to return to the call. Handset 2: When the unit rings, press answer.
KX-TCD953EB(046~056) 4.25.2000 1:56 PM Page 50 Paging/Intercom Setting the Call Waiting Tone If an incoming call has been received during an intercom between handsets, a call waiting tone sounds. You can choose whether or not this tone will sound. The factory preset is ON. 1 Press PROG . 2 Press G or F until “F24 ” is displayed. 3 Press OK . • The current setting is displayed. 1: ON 0: OFF Ex. ON F24U i 4 Press G or F to select the desired setting. • You can press 0 or 1 to select OFF or ON.
KX-TCD953EB(046~056) 4.25.2000 1:56 PM Page 51 Replacing the Batteries Selecting the battery type Three Nickel cadmium (Ni-Cd) batteries are included with this unit. Nickel metal hydrid (Ni-MH) rechargeable batteries can also be used. If you replace the batteries with Ni-MH batteries, you must set the battery type selection to “1”, or the battery strength will not be displayed correctly. The factory preset is “0” (Ni-Cd). 1 2 3 4 Press PROG . 5 Press PROG .
KX-TCD953EB(046~056) 4.25.2000 1:56 PM Page 52 Replacing the Batteries Caution: To reduce the risk of fire or injury to persons, read and follow these instructions. 1. 2. 3. 4. Use only the batteries specified. Do not use non-rechargeable batteries. Do not mix old and new batteries. Do not dispose of the batteries in a fire. They may explode. Check with local waste management codes for special disposal instructions. 5. Do not open or mutilate the batteries.
KX-TCD953EB(046~056) 4.25.2000 1:56 PM Page 53 Before Requesting Help Problem Remedy “ ” flashes and an alarm tone sounds when you press . • You are too far from the base unit. Move closer and try again. • Plug in the AC adaptor. A busy tone sounds when you press . • Another handset is in use. You cannot dial. • The unit is in call prohibition mode. Cancel the mode (p. 35). • The dialled number is restricted. Cancel the number (p. 36). • Key lock mode is set. Cancel the mode (p. 30).
KX-TCD953EB(046~056) 4.25.2000 1:56 PM Page 54 Before Requesting Help Problem You cannot program function items such as the talk mode display. • Programming is not possible while the unit is in the talk or intercom or speakerphone mode. • Do not pause for over 60 seconds while programming. You cannot store a phone number in memory. • You cannot store a phone number while the unit is in the talk or intercom mode. • Do not pause for over 60 seconds while storing.
KX-TCD953EB(046~056) 4.25.2000 1:56 PM Page 55 Problem Remedy You cannot register the handset in the base unit. • The base unit has registered a maximum of 6 handsets or the handset has registered a maximum of 4 base units. • A wrong base unit password was entered. Enter the correct password. • There is interference from other electrical units. Locate the handset and base unit away from them.
KX-TCD953EB(046~056) 4.25.2000 1:56 PM Page 56 Safety Instructions Take special care to follow the safety suggestions listed below. Safety 1) The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. 2) When the unit is not used, turn the power off. When left unused for a long period of time, the base unit should be unplugged from the household AC outlet.
KX-TCD953EB(059~062) 4.25.2000 2:06 PM Page 57 Adding Another Phone This unit will not function during a power failure. To connect a standard telephone on the same line, use a T-adaptor. To B.T. Socket T-Adaptor Telephone Line Cord Standard Telephone Chapter 5 Batteries, due to their construction, undergo some wear and tear. The lifetime of a battery also depends on correct maintenance. Charging and discharging are the most important factors.
KX-TCD953EB(059~062) 4.25.2000 2:06 PM Page 58 Dear purchaser, You have acquired a KX-TCD953EB, which is a product made in regard with the European Standards for Cordless Telephones (DECT). DECT technology is characterised by high-security protection against interceptions as well as high-quality digital transmission. This telephone was designed for a wide range of applications.
KX-TCD953EB(059~062) 4.25.2000 2:06 PM Page 59 GUARANTEE CONDITIONS OF GUARANTEE This guarantee is in addition to and does not in any way affect any statutory or other rights of consumer purchasers. If within the applicable guarantee period, the appliance proves to be defective by reason of faulty design, workmanship or materials, we undertake subject to the following conditions to have the defective appliance (or any part or parts there of) repaired or replaced free of charge. 1.
KX-TCD953EB(059~062) 4.25.2000 2:06 PM Page 60 Manufacturers Declaration: This product is in conformity with the essential requirements of the ‘R&TTE Directive 1999/5/EC’. 0436 1999/5/EC Customer Care Helpline Tel. No.: 08701 578577 Sales Department: Panasonic Business Systems U.K. Panasonic House, Willoughby Road, Bracknell, Berkshire, RG12 8FP Manufacturer: Kyushu Matsushita Electric (U.K.) Ltd.
