KX-TCD950E(E)(00~11) 98.6.24 7:58 PM Page 1 Digital Cordless Phone Model No. KX-TCD950E-B Operating Instructions PLEASE READ BEFORE USE AND SAVE. Charge the battery for about 3 hours before initial use. This equipment is not designed for making emergency telephony calls when the power fails. Alternative arrangements should be made for access to emergency services.
KX-TCD950E(E)(00~11) 98.6.25 5:00 PM Page 2 Important Information APPROVED for connection to telecommunication systems specified in the instructions for use subject to the conditions set out in them. 608310 Do not connect the AC adaptor to any AC outlet other than the standard AC 230–240 V, 50 Hz. • Outlet voltage DC1 8 V, 300 mA Outlet voltage DC2 9 V, 200 mA • The apparatus is approved for use with the KX-TCA9E power supply. • CAUTION: Do not remove cover. Live parts inside.
KX-TCD950E(E)(00~11) 98.6.25 5:00 PM Page 3 b) This apparatus is not suitable as an extension to a payphone or for use on a party line with shared service. This cordless telephone has been designed to operate on radio frequencies which have been assigned to the exclusive use of cordless telephones. As the use of cordless telephones becomes more widespread users may experience a reduction in the quality of service obtainable from this apparatus.
KX-TCD950E(E)(00~11) 98.6.25 5:00 PM Page 4 Before Initial Use Thank you for purchasing your new Panasonic digital cordless telephone. For your future reference Serial No. Date of purchase (found on the bottom of the unit) Name and address of dealer Included with this unit 4 AC Adaptor (p. 12) Order No. KX-TCA9E Telephone Line Cord (p. 12) Order No. PQJA87S Battery (p. 12) Order No. KX-TCA10CE one one one Handset Cover (p. 12) Order No. PQYNTCD950E Handset Clip (p. 19) Order No.
KX-TCD950E(E)(00~11) 98.6.25 5:00 PM Page 5 For Best Performance Battery Charge A rechargeable Nickel-Metal Hydride (Ni-MH) battery powers the handset. Install the battery (p. 12) and charge it for about 3 hours before initial use (p. 14). Operating Distance/Noise Elimination Calls are transmitted between the base unit and the handset using wireless radio waves.
KX-TCD950E(E)(00~11) 98.6.25 5:00 PM Page 6 Contents Chapter 1 Chapter 3 Preparation Advanced Operations (Special Programming Features) Location of Controls .......................8 Settings ..........................................12 Installing the Battery in the Handset .......................................12 Summary of Programming Features..........................................33 Setting the Password ....................34 Connections .................................12 Call Prohibition .
KX-TCD950E(E)(00~11) 98.6.25 5:00 PM Page 7 Chapter 5 Multi-Unit User Operations Useful Information For Optional Multi-Handset Users...............................................47 Replacing the Battery....................70 Operating More than One Handset ........................................47 Cancelling a Handset ...................50 Selecting the Stand-by Mode Display..........................................52 Before Requesting Help ...............72 Safety Instructions .................
KX-TCD950E(E)(00~11) 98.6.25 5:00 PM Page 8 Location of Controls Base unit Antenna (p. 5, 13) Charge Contacts (p. 15) KX-T CD9 50 Charge Indicator ( (p. 14) Page Button (p. 32, 48) In Use Indicator ( 8 ) (p.
KX-TCD950E(E)(00~11) 98.6.25 5:00 PM Page 9 Handset Chapter 1 Preparation Display (p. 10) Redial/Pause Button (p. 21, 22, 29) Talk Button Intercom Button INT (p. 17, 58) (p. 20) Cancel Button (p. 20, 27) Program Button (p. 17, 27) Tone Button (p. 30) 1 AB C GH I 4 PQRS 7 2 DEF 3 JKL 5 MNO 6 TUV 8 WXYZ 9 Auto Button (p. 27) 0 Recall Button (p. 30) R Power/Ringer Button (p. 16) Charge Contacts (p.
KX-TCD950E(E)(00~11) 98.6.25 5:00 PM Page 10 Location of Controls Handset display This display shows all of the possible configurations. 8888888888.88 The handset is in the stand-by mode. The base unit number is displayed (p. 16). You can select displaying either the base unit number, handset number or no display by programming (p. 52). - i- 0 i - 30 - 40 The display shows the length of the call during a conversation.
KX-TCD950E(E)(00~11) 98.6.25 5:00 PM Page 11 Symbols The handset is out of range. Move closer to the base unit. Chapter 1 The handset is in range of the base unit. Receiving/dialling/programming functions can be performed. (Flashing) (Flashing) The handset is paging another unit and/or the unit is in the intercom mode (p. 58). Preparation The handset is being paged from another unit. The unit is making or answering a call. An outside call is received.
KX-TCD950E(E)(12~22) 98.6.24 7:55 PM Page 12 Settings Installing the Battery in the Handset Install the battery and the battery cord as shown. Then install the handset cover. Cord(Black) Cord(Red) • If the rechargeable battery is not inserted correctly, the handset will not work. Connections in the AC adaptor cord and the telephone line cord to the bottom of the 1 Plug unit. Fasten the cords to prevent them from being disconnected.
KX-TCD950E(E)(12~22) 98.6.24 7:55 PM Page 13 Chapter 1 2 Connect the cords as shown. Raise the antenna. AC Adaptor TNV* Preparation To Mains Outlet (AC 230–240 V, 50 Hz) To B.T. Socket Telephone Line Cord • USE ONLY WITH Panasonic AC ADAPTOR KX-TCA9E. • Be sure not to confuse the telephone line jack with the AC adaptor jack on the base unit. If connected improperly, the base unit will not work and damage may occur. • The AC adaptor must remain connected at all times.
KX-TCD950E(E)(12~22) 98.6.24 7:55 PM Page 14 Settings Battery Charge At the time of shipment, the battery is not charged. To charge, place the handset on the base unit. Please charge the battery for at least 3 hours before initial use. • Once the handset is placed on the base unit, the charge indicator ( ) lights. Charge Indicator ( Battery strength You can check the present battery strength on the display. The battery strength is as shown in the chart below.
KX-TCD950E(E)(12~22) 98.6.24 7:55 PM Page 15 Battery information Approx. battery life While in use (Talk) Up to about 12 hours While not in use (Stand-By) Up to about 150 hours • Battery life may vary depending on usage conditions and ambient temperature. • Clean the handset and the base unit charge contacts with a soft dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. If not, the battery may not charge properly.
KX-TCD950E(E)(12~22) 98.6.24 7:55 PM Page 16 Settings Turning the Power ON Display Power/Ringer Button Press (Power/Ringer) briefly. • The current connected base unit number is displayed. • You can select displaying either the base unit number, handset number or no display by programming (p. 52). • The handset is in the stand-by mode. 8888888888.88 Ex. The base unit number is 1. - ITo turn the power OFF, press (Power/Ringer) firmly. • The display will go blank. • The handset will not ring.
KX-TCD950E(E)(12~22) 98.6.24 7:56 PM Page 17 You can program the dialling mode by using the handset near the base unit. If you have touch tone service, set to TONE. If rotary or pulse service is used, set to PULSE. The factory preset is 1 (TONE). Chapter 1 Selecting the Dialling Mode Be sure that the power is ON (p. 16) and you are in the stand-by mode. I NT 2 Press Preparation (Program), then 1 •Press " " and " " are displayed. (Intercom). 3 . 3 ---- the base unit password.
KX-TCD950E(E)(12~22) 98.6.24 7:56 PM Page 18 Settings You can determine which type of local BT exchange you are connected to using the following procedure. 1. Ensure that the dialling mode is selected to TONE. 2. Press (Talk), then identify the dial tone. 3. Dial a number you are familiar with. 4. If the call is successful, you are connected to a tone exchange. Therefore, leave the dialling mode as TONE. 5. If the call is not successful, you are connected to a pulse exchange.
KX-TCD950E(E)(12~22) 98.6.24 7:56 PM Page 19 If necessary, you can attach the handset clip so you can hang the handset on your belt or pocket.
KX-TCD950E(E)(12~22) 98.6.24 7:56 PM Page 20 Making Calls Display Redial/Pause Button Talk Button Cancel Button Press (Power/Ringer) briefly to turn the power ON. (Talk). 1 Press •" " is displayed. a phone number. 2 Dial • If you misdial, press (Cancel) then dial again. • The dialled number is displayed. • The display starts showing the length of the call about 7 seconds after dialling the last digit (p. 42). hang up, press (Talk) or place the 3 Tohandset on the base unit. 20 •" " goes out.
KX-TCD950E(E)(12~22) 98.6.24 7:56 PM Page 21 To dial after confirming the entered number a phone number. 1 Enter • If you misdial while dialling a number; I234567 8 (Talk). 2 Press •" " is displayed. I234567 8 0 0 - 0 I - 23 • If " " flashes and an alarm tone sounds after pressing to make a call, move closer to the base unit. Then try again. • If busy tones sound after pressing to make a call, another handset (p. 48) is in use.
KX-TCD950E(E)(12~22) 98.6.24 7:56 PM Page 22 Making Calls To redial after confirming the numbers in redial memory The unit automatically stores the last 10 numbers dialled into redial memory. (Redial/Pause) to select 1 Press the desired phone number. You can Redial item 1 scroll through the numbers by pressing (Redial/Pause). • To return the stand-by mode, press (Cancel) firmly. I234567 8 Redial item 2 I23456 Redial item 10 I234 confirming the number on the 2 After display, press (Talk).
KX-TCD950E(E)(23~44) 98.6.25 4:58 PM Page 23 Answering Calls Make sure that the power is ON (p. 16), or the handset will not ring. the handset is off the base unit, 1 Ifpress (Talk). Talk Button • The display starts showing the length of the call. If on the base unit, just lift up. Chapter 2 OR Basic Operations up, press (Talk) or place 2 Tothehang handset on the base unit. • The length of the call remains on the display for about 5 seconds.
KX-TCD950E(E)(23~44) 98.6.25 4:58 PM Page 24 Setting the Receiver Volume You can program the handset receiver volume (3 levels) according to your needs. The lowest setting is 1 and the highest setting is 3. The factory preset is 2. (Program). 1 •Press " " is displayed. 6 . 2 •Press The current handset receiver volume is 6 2 displayed. a button 3 Press volume. 1 to 3 to select the receiver • The selected receiver volume is displayed. Ex. 3 is selected. 6 3 finished, press (Program).
KX-TCD950E(E)(23~44) 98.6.25 4:58 PM Page 25 Setting the Ringer Volume You can program the handset ringer volume (6 levels) according to your needs. The lowest setting is 1 and the highest setting is 6. The factory preset is 3. 1 Press (Program). 22 3 and rings. a button 3 Press volume. 1 to 6 to select the ringer finished, press (Program). 4 •When A confirmation tone sounds. 22 4 Basic Operations • The selected ringer volume is displayed and rings. Ex. 4 is selected. Chapter 2 2 twice.
KX-TCD950E(E)(23~44) 98.6.25 4:58 PM Page 26 Automatic Dialling Storing Phone Numbers in Memory You can store up to 10 phone numbers in the handset. The dialling buttons ( 0 to 9 ) function as memory stations. Be sure that the power is ON (p. 16) and you are in the stand-by mode.
KX-TCD950E(E)(23~44) 98.6.25 4:58 PM Page 27 (Program). 1 Press •" " is displayed. 2 Press (Auto). a phone number up to 24 digits. 4 Enter • The entered number is displayed. i- finished, press (Program). 5 When • A confirmation tone sounds. - I- • If you misdial while dialling a number; To erase one digit, press (Cancel) briefly. To erase all of the digits, press (Cancel) firmly. •" " goes out and the number is stored in the memory station.
KX-TCD950E(E)(23~44) 98.6.25 4:58 PM Page 28 Automatic Dialling Dialling a Stored Number 1 Press (Talk). 2 Press (Auto). a memory station number ( 0 to 3 Press • The stored number is dialled. 9 ). i234567 To dial after confirming the phone number 1 Press (Auto). the memory station number ( 0 to 2 Press OR 9 ). i234567 Press (Auto) repeatedly to find the number you want to dial. • To return the stand-by mode, press (Cancel) firmly. (Talk). 3 Press • The stored number is dialled.
KX-TCD950E(E)(23~44) 98.6.25 4:58 PM Page 29 Special Features Redial/Pause Button Intercom Button INT Program Button Tone Button How to Use the Pause Button (For Analogue PBX Line/Long Distance Service Users) Ex: Line access number 9 (PBX) (Redial/Pause) 9 Phone number • Pressing (Redial/Pause) once creates a pause. This prevents misdialling when you redial or dial a stored number. • Pressing (Redial/Pause) more than once increases the length of the pause between numbers.
KX-TCD950E(E)(23~44) 98.6.25 4:59 PM Page 30 Special Features Temporary Tone Dialling (For Rotary or Pulse Service Users) Before dialling access numbers which require tone dialling, you must press the following buttons. 1. Press 2. Press 3. Press (Program). (Tone). (Program). • The dialling mode changes to tone. You can enter numbers to access an answering system, electronic banking service, etc. When you hang up, the mode will return to pulse.
KX-TCD950E(E)(23~44) 98.6.25 4:59 PM Page 31 Setting the FLASH/EARTH mode If your unit is installed behind a PBX with an earth function, you must select the earth mode. The factory preset is "1" (FLASH). 1 Press 3 . 3 Enter the base unit password (p. 35). 5 To select "EARTH", press 2 . OR To select "FLASH", press 1 , then 2 . 3 32 I Ex. EARTH is selected. 32 2 OR Basic Operations 2 . 4 •Press The current setting is displayed. 3 ---- Chapter 2 2 Press (Program), then I NT (Intercom). Ex.
KX-TCD950E(E)(23~44) 98.6.25 4:59 PM Page 32 Special Features Setting the Key Lock You can lock the handset dialling buttons. Incoming calls can be answered, but outgoing calls can not be dialled until the key lock is cancelled. When the unit is in the stand-by mode, press and hold (Program) for about 2 seconds. •" " is displayed. • A confirmation tone sounds. • If you press (Talk) to answer a call, all of the dialling buttons will unlock and " " goes out.
KX-TCD950E(E)(23~44) 98.6.25 4:59 PM Page 33 Summary of Programming Features This unit has base unit programming and handset programming modes. Be sure that the power is ON (p. 16), you are in the stand-by mode, and the handset is near the base unit. See the noted pages for details. The base unit program mode has the following functions. • To set the Dialling Mode, see page 17. • To set the Pause Timing, see page 29. • To set the FLASH/EARTH Mode, see page 31.
KX-TCD950E(E)(23~44) 98.6.25 4:59 PM Page 34 Setting the Password On the handset You can program the password according to your needs. The factory preset is 0000. Changing the password may prevent the unauthorized use of your unit by another person. You need to enter this password when using the following features. • Setting the Call Prohibition (p. 36) • Clearing the Settings in Handset Memory (p. 45) • Cancelling a Base Unit (p. 51) Once you have programmed the password, you cannot confirm it.
KX-TCD950E(E)(23~44) 98.6.25 4:59 PM Page 35 On the base unit You can program the password according to your needs. The factory preset is 0000. Changing the password may prevent the unauthorized use of your unit by another person. You need to enter this password when using the following features. • Setting the Dialling Mode (p. 17) • Setting the Pause Timing (p. 29) • Setting the FLASH/EARTH Mode (p. 31) • Setting the Call Restriction (p. 38) • Clearing the Settings of the Base Unit Memory (p.
KX-TCD950E(E)(23~44) 98.6.25 4:59 PM Page 36 Call Prohibition You can prohibit anyone from making a call with your handset except for emergency calls (999, 112). Only incoming calls are accepted. The factory preset is 0 (OFF). Setting the Call Prohibition Mode 1 Press 2 Press (Program). 4 , then 1 . 4 i ---- the handset password (p. 34). 3 •Enter The current setting is displayed. 4 Press 1 (ON). finished, press (Program). 5 •When A confirmation tone sounds. •" " is displayed.
KX-TCD950E(E)(23~44) 98.6.25 4:59 PM Page 37 Cancelling the call prohibition mode 1 Press 2 Press (Program). 4 , then 1 . 4 i ---- the handset password (p. 34). 3 •Enter The current setting is displayed. 4 Press 4i i 0 (OFF). •" " goes out. • The unit will cancel the call prohibition mode. - i- Advanced Operations • In case you forget your PIN code, please consult with your nearest Panasonic Service Center. Chapter 3 finished, press (Program). 5 •When A confirmation tone sounds.
KX-TCD950E(E)(23~44) 98.6.25 4:59 PM Page 38 Call Restriction You can restrict desired handset(s) from dialling selected telephone numbers. For selected handset(s), you can assign up to 6 call restriction numbers (up to 8 digits). After storing, all telephone numbers beginning with the restricted digits cannot be dialled out. For example, if "00" is assigned as the call restriction number, international calls cannot be made. The factory preset is OFF.
KX-TCD950E(E)(23~44) 98.6.25 4:59 PM Page 39 a call restriction number up to 8 digits. 6 •Enter If you misdial, press (Cancel) and enter the number again. (Program). 7 •Press The call restriction number is stored. • A confirmation tone sounds. • To set the next call restriction number, enter the number, then press (Program). Ex. 0190 is entered. 6 i- 0 i 90 6 2- Follow steps 1 to 3. In step 4, enter the desired handset number(s). • The cancelled handset number(s) stop(s) flashing.
KX-TCD950E(E)(23~44) 98.6.25 4:59 PM Page 40 Direct Call You can store a number in the direct call memory. This feature allows you to make a call easily by pressing (Talk). You can store a direct call number in each handset, if more than one handset is registered (p. 48). Setting the Direct Call Mode After storing the direct call number, the unit will automatically switch to the direct call mode. 1 Press (Program). 4 , then 2 . 2 •Press The current stored number is displayed.
KX-TCD950E(E)(23~44) 98.6.25 4:59 PM Page 41 Dialling a Stored Number Make sure that " (Talk). " is displayed, then press 987654 3 2 I • The number stored in the direct call memory is dialed automatically. Cancelling the direct call mode 1 Press (Program). 42 -987654 3 2 I finished, press (Program). 3 •When A confirmation tone sounds. - i- Advanced Operations • " " goes out. • The direct call mode is cancelled. Chapter 3 4 , then 2 . 2 •Press The current stored number is displayed.
KX-TCD950E(E)(23~44) 98.6.25 4:59 PM Page 42 Selecting the Talk Mode Display You can select displaying either the length of the call or the dialled telephone number while in the talk mode. The factory preset is 1 (length of the call). 1 Press (Program). 3 , then 2 . 2 •Press The current setting is displayed. 3 ToORselect "dialled telephone number", press 32 i 0 . Ex. "Dialled telephone number" is selected. To select "length of the call", press 1 . • The setting is displayed.
KX-TCD950E(E)(23~44) 98.6.25 4:59 PM Page 43 Setting the Ringer Pattern You can program the handset ringer pattern (6 patterns) according to your needs. The factory preset is pattern 1. 1 Press (Program). 2 , then 3 . 2 •Press The current handset ringer pattern is displayed 23 I and rings. a button 3 Press pattern. 1 to 6 to select the ringer • The selected ringer pattern is displayed and rings. Ex. 4 is selected. 23 4 Chapter 3 finished, press (Program). 4 •When A confirmation tone sounds.
KX-TCD950E(E)(23~44) 98.6.25 4:59 PM Page 44 Setting the Range Warning Alarm You can select whether the handset sounds a range warning alarm or not. The factory preset is 0 (OFF). 1 Press (Program). 2 Press 2 , then 5 . 3 ToORselect ON, press 1 . To select OFF, press 0 . • The setting is displayed. 25 0 Ex. ON is selected. 25 i finished, press (Program). 4 When • A confirmation tone sounds. Setting the Battery Low Alarm You can select whether the handset sounds a battery low alarm or not.
KX-TCD950E(E)(45~61) 98.6.24 7:52 PM Page 45 Clearing the Settings in Memory On the handset This function enables the handset to clear the following settings at one time. All settings will return to the default settings (shown in brackets).
KX-TCD950E(E)(45~61) 98.6.24 7:52 PM Page 46 Clearing the Settings in Memory On the base unit This function enables the base unit to clear the following settings at one time. All settings will return to the default settings (shown in brackets). – – – – – – – Bell selection Dialling mode Pause timing Call restricted handset(s) Call restriction number(s) Base unit password FLASH/EARTH mode 1 Press (Program), then I NT (Intercom). 2 Press 0 . 3 Enter the base unit password (p. 35).
KX-TCD950E(E)(45~61) 98.6.24 7:52 PM Page 47 For Optional Multi-Handset Users Operating More than One Handset You can register and operate up to 6 handsets in the base unit. Operating more than one handset allows you to have an internal call while simultaneously conducting an external phone call with another handset. Example: Handset 1 is engaged in an internal call with handset 3. Handset 2 is engaged in an external call.
KX-TCD950E(E)(45~61) 98.6.24 7:52 PM Page 48 For Optional Multi-Handset Users Registering a Handset in the Base Unit Each optional handset that you purchase must be registered in the base unit before use. • Charge the optional handset battery for about 3 hours before initial use. • Be sure that the power is ON (p. 16) and you are in the stand-by mode. • Register the handset number within 1 minute. If it is not registered within 1 minute, press (Program) on the handset to cancel the programming mode.
KX-TCD950E(E)(45~61) 98.6.24 7:52 PM Page 49 the desired base unit number using 4 Press buttons 1 to 4 . • " " flashes. • While the handset is searching for the base unit, "–" flashes across the display. • The number is assigned as the base unit number for the handset. • The factory preset of the base unit password is 0000. If you have changed the base unit password (p. 35), enter the new password. finished, press (Program). 6 •When A confirmation tone sounds. 7i 7 i ---Ex.
KX-TCD950E(E)(45~61) 98.6.24 7:52 PM Page 50 For Optional Multi-Handset Users Cancelling a Handset Each handset can cancel itself or another handset. 1 Press (Program), then I NT (Intercom). 2 Press 7 . the base unit password (p. 35). 3 •Enter The current registered handset number(s) is/are displayed. the handset number(s) you wish to 4 Press cancel using the dialling buttons. • The selected handset number(s) flash(es). • If you misdial, press the number(s) again. finished, press (Program).
KX-TCD950E(E)(45~61) 98.6.24 7:52 PM Page 51 Cancelling a base unit If the handset is in another radio area and/or the power is OFF when "Cancelling a Handset" on page 50, the previous base unit number still remains in the cancelled handset. Therefore, you need to cancel the base unit registered in the cancelled handset by following the steps below. 1 Press (Program). the handset password (p. 34). 3 •Enter The current registered base unit number(s) 70 - - - Ex.
KX-TCD950E(E)(45~61) 98.6.24 7:52 PM Page 52 For Optional Multi-Handset Users Selecting the Stand-by Mode Display You can select displaying either the base unit number, handset number or no display while in the stand-by mode. The factory preset is 1 (base unit number). 1 Press (Program). 3 , then 1 . 2 Press • The current setting is displayed. 3 ToORselect "the handset number", press 3i 2 . To select "no display", press 0 . OR To select "the base unit number", press 1 . finished, press (Program).
KX-TCD950E(E)(45~61) 98.6.24 7:52 PM Page 53 Bell Selection There are four types of bell selection. The factory preset is 1 (All handsets). All handsets (p. 57) When a call is received, all of the handsets will ring at the same time. Selecting the handsets (p. 55) You can select which handset(s) you want to ring. Selecting the first handset (p. 56) One handset will ring first, then all of the handsets will ring if the first handset does not answer the call.
KX-TCD950E(E)(45~61) 98.6.24 7:52 PM Page 54 For Optional Multi-Handset Users Selecting "Cyclic" You can make the handsets ring in their handset number order (Handset 1, then Handset 2, etc.). When "Cyclic" is selected, you can select the ring count (1 to 6) for the other handsets. The factory preset is 3 rings. 1 Press 2 Press (Program), then I NT (Intercom). 1 . i ---- the base unit password (p. 35). 3 •Enter The current setting is displayed. 1 : All handsets Ex. "All handsets" is selected.
KX-TCD950E(E)(45~61) 98.6.24 7:52 PM Page 55 Selecting the Handsets You can select which handset(s) you want to ring. 1 Press 2 Press (Program), then I NT (Intercom). 1 . Ex. "All handsets" is selected. i i 3 . 4 •Press The current registered handset number(s) is/are displayed. • The current selected handset number(s) is/are flashing. • The selected handset number(s) flash(es). • If you misdial, press the number(s) again. • You must enter a handset number.
KX-TCD950E(E)(45~61) 98.6.24 7:52 PM Page 56 For Optional Multi-Handset Users Selecting the First Handset One handset will ring first, then all of the handsets will ring if the first handset does not answer the call. You can select which handset will ring first and the ring count (1 to 6) until all of the handsets ring. 1 Press (Program), then I NT (Intercom). 2 Press 1 . the base unit password (p. 35). 3 Enter • The current setting is displayed. i ---Ex. "All handsets" is selected. i i 4 .
KX-TCD950E(E)(45~61) 98.6.24 7:52 PM dialling buttons, 7 Press ring count. Page 57 1 to 6 to select the Ex. "5 rings" is selected. i 4 - i 23456 - 5 finished, press (Program). 8 •When A confirmation tone sounds. • To change the handset you wish to ring, repeat from step 1. When a call is received, all of the handsets will ring at the same time. 1 Press (Program), then I NT (Intercom). 2 Press 1 . 4 Press 1 . Ex. "Cyclic" is selected. i 2 Chapter 4 the base unit password (p. 35).
KX-TCD950E(E)(45~61) 98.6.24 7:52 PM Page 58 For Optional Multi-Handset Users Paging All Handsets from the Base Unit The base unit user can page all of the handsets as shown below. Press (Page). • All of the handsets will ring for 1 minute. • To stop paging, press again or press (Talk) on one of the handsets. Page Button Talk Button Intercom between Handsets A 2-way intercom is available between the handsets. (Ex. Handset 1 is paging Handset 2.
KX-TCD950E(E)(45~61) 98.6.24 7:52 PM Page 59 Transferring a Call from One Handset to Another The intercom can be used during a call. This feature enables you to transfer a call between the handsets. (Ex. Handset 1 is transferring a call to Handset 2.) Transferring a call using the intercom 1: 1 Handset During a call, press • The call is put on hold. • You will hear an internal ring back tone until the other handset answers. • If there is no answer, press I NT (Intercom) to return to the call.
KX-TCD950E(E)(45~61) 98.6.24 7:52 PM Page 60 For Optional Multi-Handset Users Transferring a call without an intercom This feature enables you to transfer the call to another handset without waiting for the handset to answer the page. (Ex. Handset 1 is transferring a call to Handset 2.) 1: 1 Handset During a call, press I NT (Intercom), then press the desired handset number using the dialling buttons. Press (Talk) to transfer the call. • The call is put on hold.
KX-TCD950E(E)(45~61) 98.6.24 7:52 PM Page 61 Setting the Call Waiting Tone If an incoming call has been received during an intercom between handsets, a call waiting tone sounds. You can select whether this tone will sound or not. The factory preset is 1 (ON). 1 Press (Program). 3 ToORselect OFF, press 0 . To select ON, press 1 . • The setting is displayed. Ex. OFF is selected. 24 0 Chapter 4 finished, press (Program). 4 •When A confirmation tone sounds.
KX-TCD950E(E)(62~71) 98.6.24 7:54 PM Page 62 For Optional Multi-KX-TCD950E-B Users Operating More than One Base Unit You can register and operate your handset (KX-A332CE-B) at up to 4 KX-TCD950E-B base units. Since each base unit forms a radio cell, you can extend the range or area in which you can make/answer calls with the same handset by placing the base units in suitable locations. Operation example: The example below shows two base units connected to 2 lines.
KX-TCD950E(E)(62~71) 98.6.24 7:54 PM Page 63 Connecting several base units to a PBX The example below shows a telephone system with 2 lines shared by 6 handsets which are registered in all 3 base units (p. 66). Radio Range H2 H3 B1 L1 H4 PBX B2 L2 Multi-Unit User Operations H1 B3 H6 H5 Chapter 4 H : Handset B : Base unit L 1 : Telephone line 1 L 2 : Telephone line 2 You can make outgoing calls via phone line L1 or L2 within the radio area of all 3 base units.
KX-TCD950E(E)(62~71) 98.6.24 7:54 PM Page 64 For Optional Multi-KX-TCD950E-B Users Organizing multiple handsets at more than one base unit *H1 B1 H2 H3 H4 H5 Optional Handsets (Can be used at both base units.) *H1 B2 * The included handsets (handsets 1) are only registered to their corresponding base unit (base unit 1 and base unit 2). Example: 4 optional KX-A332CE-B handsets are added to 2 KX-TCD950E-B base units.
KX-TCD950E(E)(62~71) *H1 98.6.24 7:54 PM Page 65 B1 H3 H4 H5 (The optional handsets are already registered.) B2 *H1→H6 * Both included handsets (1) are already registered in their corresponding base unit. In order to use both of the included handsets in base units 1 and 2, follow the steps below to register the handsets. Chapter 4 1. Cancel the included handset for base unit number 2. (See page 50.) 2. Register base unit 1’s included handset in base unit number 2.
KX-TCD950E(E)(62~71) 98.6.24 7:54 PM Page 66 For Optional Multi-KX-TCD950E-B Users Registering at More than One Base Unit You can register and operate your handset (KX-A332CE-B) at up to 4 KX-TCD950E-B base units. If the handset is used with another base unit, it must be registered in that base unit before use. • Be sure that the power is ON (p. 16) and you are in the stand-by mode. • Register the handset number within 1 minute.
KX-TCD950E(E)(62~71) 98.6.24 7:54 PM Page 67 the desired base unit number using 4 Press buttons 1 to 4 . • " " flashes. • While the handset is searching for the base unit, "–" flashes across the display. • The number is assigned as the base unit number for the handset. • The factory preset of the base unit password is 0000. If you have changed the base unit password (p. 35), enter the new password. finished, press (Program). 6 •When A confirmation tone sounds. 7i 7 i ---- Ex.
KX-TCD950E(E)(62~71) 98.6.24 7:54 PM Page 68 For Optional Multi-KX-TCD950E-B Users Notes on using the handset(s) at more than one base unit • The base unit number which the handset is currently in contact with can be displayed in the stand-by mode (p. 52). Calls (both incoming and outgoing) can be conducted only via the displayed base unit (even if the radio areas overlap with neighbouring base units).
KX-TCD950E(E)(62~71) 98.6.24 7:54 PM Page 69 Accessing the Base Unit Automatic base unit access The handset automatically selects a registered base unit. • When the handset moves to another base unit radio area, it loses contact with the previous base unit and automatically accesses the new base unit radio area. • If the handset is in the overlap area between several base unit radio areas, the handset will access the base unit in the order of the base unit numbers.
KX-TCD950E(E)(62~71) 98.6.24 7:54 PM Page 70 Replacing the Battery If " " flashes after a few telephone calls even when the handset battery has been fully charged, it is time to change the battery with a new one. Remember to charge the new battery after battery replacement. the power OFF to prevent memory loss (p. 16). 1 Turn Remove the handset cover, then remove the battery. the battery with a new 2 Replace one as shown. Cord(Black) • When you finish, close the handset cover and turn the power ON (p.
KX-TCD950E(E)(62~71) 98.6.24 7:54 PM Page 71 Caution: To reduce the risk of fire or injury to persons, read and follow these instructions. 1. Use only the battery specified. 2. Do not dispose of the battery in a fire. It may explode. Check with local waste management codes for special disposal instructions. 3. Do not open or mutilate the battery. Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed. 4.
KX-TCD950E(E)(72~) 98.6.24 7:55 PM Page 72 Before Requesting Help Problem 72 Remedy The unit does not work. • Check the settings (p. 12–18). • Charge the battery fully (p. 14). • Clean the charge contracts and charge again (p. 15). • The handset has been cancelled or the handset has not been registered. Register the handset number (p. 48, 66). • Unplug the AC adaptor and turn the power OFF to reset. Reconnect the AC adaptor and turn the power ON. Then try again.
KX-TCD950E(E)(72~) 98.6.24 7:55 PM Problem Page 73 Remedy • The dialling mode setting is incorrect. Please check the dialling mode (p. 17). • The unit is in the call prohibition mode. To cancel the mode, see page 37. • The number which you dialled is restricted. To cancel the number, see page 39. • Key lock mode is set. To cancel the mode, see page 32. Static, sound cuts in/out, fades. Interference from other electrical units.
KX-TCD950E(E)(72~) 98.6.24 7:55 PM Page 74 Before Requesting Help Problem 74 Remedy The paged handset does not answer. • The paged handset is not in the same radio area. • The paged handset is engaged in an outside call. • The handset number has been cancelled or the handset has not been registered. Register the handset in the base unit (p. 48, 66). You cannot program items, such as the dialling mode. • Programming is not available while the unit is in the talk or intercom mode.
KX-TCD950E(E)(72~) 98.6.24 7:55 PM Page 75 Remedy You cannot register the handset number. • 6 handsets are already registered in the base unit. • 4 base units are already registered in the handset. • A wrong base unit password was entered. Enter the correct password. • There is interference from other electrical units. Set the handset and base unit away from them. • You must register the handset number within 1 minute or programming will be cancelled. " " flashes or beeps tones sound every 15 seconds.
KX-TCD950E(E)(72~) 98.6.24 7:55 PM Page 76 Safety Instructions Take special care to follow the safety suggestions listed below. Safety 1) Power Source: The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. 2) Non use Periods: When the unit is not used, turn the power off. When left unused for a long period of time, the base unit should be unplugged from the household AC outlet.
KX-TCD950E(E)(72~) 98.6.24 7:55 PM Page 77 Important Notice Concerning the Correct Use and Charging of a Ni-MH Battery Batteries, due to their construction, undergo some wear and tear. The life of a battery also depends on correct maintenance. Charging and discharging are the most important factors. You should take notice of the following to maintain battery life for as long as possible. A Ni-MH battery has the "memory effect".
KX-TCD950E(E)(72~) 98.6.24 7:55 PM Page 78 Dear purchaser, You have acquired a KX-TCD950E-B, which is a product made in regard with the European Standards for Cordless Telephones (DECT). DECT technology is characterised by high-security protection against interception as well as high-quality digital transmission. This telephone was designed for a wide range of applications.
KX-TCD950E(E)(72~) 98.6.24 7:55 PM Page 79 GUARANTEE CONDITIONS OF GUARANTEE This guarantee is in addition to and does not in any way affect any statutory or other rights of consumer purchasers. If within the applicable guarantee period, the appliance proves to be defective by reason of faulty design, workmanship or materials, we undertake subject to the following conditions to have the defective appliance (or any part or parts there of) repaired or replaced free of charge. 1.
KX-TCD950E(E)(72~) 98.6.24 7:55 PM Page 80 73/23/EEC 89/336/EEC 92/31/EEC 93/68/EEC Sales Department: Panasonic Business Systems U.K. Panasonic House, Willoughby Road, Bracknell, Berkshire, RG12 8FP Manufacturer: Kyushu Matsushita Electric (U.K.) Ltd.
