Operating instructions

19
Preparation
Chapter 1
Setting time
1
Press .
2 Press or until the arrow points
to “Setting Base”, then press .
•“Input Command” is displayed.
3 Press .
•If already set, the current setting is
displayed.
4 Enter the current time (24 hour time)
using a 4–digit number.
5 Press .
•Abeep sounds.
•To return to the standby mode, press
.
Setting the Date and Time
After setting the date and time, the current date and time will be displayed on the handset in the
standby mode. You can set 24-hour clock by programming.
Make sure that the power is ON (p. 13) and the unit is in the standby mode.
Setting date
1
Press .
2 Press or until the arrow points
to “Setting Base”, then press .
•“Input Command” is displayed.
3 Press TWICE.
•If already set, the current setting is
displayed.
4 Enter the current date (day, month, year)
using a 6-digit number.
5
Press .
•Abeep sounds.
•To return to the standby mode, press
.
Input Command
__–__
Input Command
09–30
Ex. To set 9:30, enter “0930” .
Input Command
__–__–__
Input Command
05–08–01
Ex. To set 5. August, 2001, enter “010801”.
If a power failure occurs, the adjusted day/time
will be erased. Readjust the date and time.
KX-TCD715EM-2Preparation2 01.7.19 2:13 PM Page 19