KX-TCD715EM-1Preparation1** 01.7.19 2:12 PM Page 1 Digital Cordless Phone Model No. KX-TCD715EM Operating Instructions 1 4 7 2 3 5 6 8 9 0 1 GHI 4 ABC JKL PQRS 7 TUV 8 5 2 DEF MNO WXYZ 3 R 6 9 0 PLEASE READ BEFORE USE AND SAVE. Caller ID Compatible Charge the batteries for about 15 hours before initial use. This equipment is not designed for making emergency telephony calls when the power fails. Alternative arrangements should be made for access to emergency services.
KX-TCD715EM-1Preparation1** 01.7.19 2:12 PM Page 2 Thank you for purchasing your new Panasonic digital cordless telephone. • Order accessory items for all Communications Products with ease and confidence either by telephoning our Customer Care Centre on: 08705 357357 Monday - Friday 9:00am - 5:30pm • Or go on line through our Internet Accessory ordering application at www.panasonic.co.uk. • Most major credit and debit cards accepted.
KX-TCD715EM-1Preparation1** 01.7.19 2:12 PM a) This apparatus may be used on telecommunication systems employing MF signalling. It is suitable for connection to a direct exchange line on the PSTN (Public Switched Telephone Network) or via a compatible PBX (Private Branch Exchange). (Contact the supplier for an up to date list of compatible PBX’s.) b) This apparatus is not suitable as an extension to a payphone or for use on a party line with shared service.
KX-TCD715EM-1Preparation1** 01.7.19 2:12 PM Page 4 Before Initial Use Caller ID, where available, is a telephone company service. After subscribing to Caller ID, this phone will display the caller’s phone number. A second caller’s phone number displays while the user is on another call, requires a subscription to both Caller ID and Call Waiting. For your future reference Serial No. Date of purchase (found on the bottom of the unit) Name and address of dealer Included with this unit AC Adaptor (p.
KX-TCD715EM-1Preparation1** 01.7.19 2:12 PM Page 5 For Best Performance Battery Charge Rechargeable Nickel-Metal Hydride (Ni-MH) batteries power the handset. Install the batteries (p. 12) and charge them for about 15 hours before initial use (p. 12). Base Unit Location Calls are transmitted between the base unit and the handset using wireless radio waves.
KX-TCD715EM-1Preparation1** 01.7.19 2:12 PM Page 6 Contents Chapter 1 Preparation Location of Controls ..............................8 Display ...................................................10 Settings .................................................11 Connections ........................................11 Installing the Batteries in the Handset ..12 Battery Charge ....................................12 Turning the Power ON ........................13 Summary of Programmable Functions ...............
KX-TCD715EM-1Preparation1** 01.7.19 2:12 PM Page 7 Chapter 5 Multi-Unit User Operations Useful Information For Optional Multi-Unit Users..............58 Operating More than One Handset.....58 Operating More than One Base Unit...58 Registering Optional Handset(s) in the Base Unit.............................................59 Selecting the Base Unit Access ..........60 Cancelling a Handset ..........................61 Bell Selection.......................................
KX-TCD715EM-1Preparation1** 01.7.19 2:12 PM Page 8 Location of Controls Base unit R (Recall) Button (p. 44) Charge Contacts (p. 13) In Use Indicator ( Caller ID Indicator ( ) (p. 24) ) (p. 26) (Locator) Button (p. 41) (Select) Button (p. 65, 66) 1 GHI 4 ABC JKL PQRS 7 TUV 8 5 2 DEF MNO WXYZ 3 R 6 9 0 MIC (Microphone) (p. 24) (Mute) Button and Indicator (p. 24) (Redial/Pause) Button (p. 24, 43) (Cancel) Button (p. 24) (Digital Speakerphone) Button and Indicator (p.
KX-TCD715EM-1Preparation1** 01.7.19 2:12 PM Page 9 Handset Chapter 1 Back side Receiver (p. 22) Display (p. 10) (Redial/Pause) Button (p. 22, 43) (Phonebook) Button (p. 33, 37) (Function/OK) Button (p. 14, 32) Headset Jack (p. 69) (OFF/Power) Button (p. 13, 21) (Talk) button (p. 21) C (Speakerphone) Button (p. 21) Navigator Key ( , , , (p. 21, 27, 32) Preparation Speaker (p. 21) 1 4 ) (Capital Change) Button (p. 34, 44) 7 2 5 8 C (Clear) Button (p.
KX-TCD715EM-1Preparation1** 01.7.19 2:12 PM Page 10 Display ABCDEFGHIabcdefg 1234567890123456 Icons The call prohibition icon is displayed when this mode is turned on (p. 47). The in-range icon indicates that the handset is in range of the base unit. It flashes when the handset is out of range. The phonebook icon is displayed when storing or viewing the phonebook items (p. 33, 37). The page/intercom icon is displayed when paging or using the intercom. It flashes when another unit pages the handset.
KX-TCD715EM-1Preparation1** 01.7.19 2:12 PM Page 11 Settings Connections LINE Preparation 9V Chapter 1 Fasten the AC adaptor cord to prevent it from being disconnected. Hook Telephone Line Cord To B.T. Socket TNV* To Mains Outlet (AC 220—240 V, 50 Hz) AC Adaptor • USE ONLY WITH Panasonic AC ADAPTOR PQLV1E. • The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.
KX-TCD715EM-1Preparation1** 01.7.19 2:12 PM Page 12 Settings Installing the Batteries in the Handset Install the batteries as shown. Then install the handset cover. • If the rechargeable batteries are not inserted correctly, the handset will not work. Battery Charge At the time of shipment, the batteries are not charged. To charge, place the handset on the base unit. Please charge the batteries for about 15 hours before initial use. During charging the battery, battery icon is as shown below.
KX-TCD715EM-1Preparation1** 01.7.
KX-TCD715EM-2Preparation2 01.7.19 2:13 PM Page 14 Summary of Programmable Functions You can program the following function items using the handset near the base unit. The display shows the instructions. After selecting “Setting Base” , enter the desired function command (p. 15). See the corresponding pages for function details. Make sure that the power is ON (p. 13) and the unit is in the standby mode. Base 1 12 New Calls 12.05 13:58 Press .
KX-TCD715EM-2Preparation2 01.7.19 2:13 PM Page 15 Command menu Command @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ Function item @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 1 1 To select the bell selection (p.
KX-TCD715EM-2Preparation2 01.7.19 2:13 PM Page 16 Summary of Programmable Functions Handset settings You can program the following function items (the handset should be within the range of the base unit). The display shows the instructions. After selecting “Setting Handset”, the main menu is displayed. Most items in the main menu have a sub-menu. The sub-menu is shown after selecting the item in the main menu. See the corresponding pages for function details.
KX-TCD715EM-2Preparation2 01.7.
KX-TCD715EM-2Preparation2 01.7.19 2:13 PM Page 18 Programmable Settings Selecting the Display Language You can choose one of 18 display languages. The factory preset is English. Make sure that the power is ON (p. 13) and the unit is in the standby mode. 1 Press 2 Press or until the arrow points to “Setting Handset”, then press . . 3 Press or until the arrow points to “Display Option”, then press . 4 Press or until the arrow points to “Select Language”, then press . 5 Press or language.
KX-TCD715EM-2Preparation2 01.7.19 2:13 PM Page 19 Setting the Date and Time Chapter 1 After setting the date and time, the current date and time will be displayed on the handset in the standby mode. You can set 24-hour clock by programming. Make sure that the power is ON (p. 13) and the unit is in the standby mode. Setting date Setting time Press . 2 Press or until the arrow points to “Setting Base”, then press 1 Press . 2 Press or to “Setting Base”, then press . Press 3 .
KX-TCD715EM-2Preparation2 01.7.19 2:13 PM Page 20 Programmable Settings Selecting the Handset Ringer Volume 6 levels are available. The lowest level is 1. The highest level is 6. The factory preset is 3. When set to OFF, the handset will not ring. Press or to select “Setting Handset” then “Ringer Option” then or or or to select to select “Ringer Volume” then to select the desired level •To turn the ringer OFF, erase “ ” by pressing until “OFF” is displayed.
KX-TCD715EM-3Basic1 01.7.19 2:13 PM Page 21 Making Calls With the Handset Make sure that the power is ON (p. 13). 1 Press •“ 2 . ” is displayed. Dial a phone number. • The dialled number is displayed. 1 2 To hang up, press or place the handset on the base unit. • The handset will return to the standby mode. To dial after confirming the entered number 1 Enter a phone number. • The entered number is displayed. • If you misdial, press C . Digits are erased from the right.
KX-TCD715EM-3Basic1 01.7.19 2:13 PM Page 22 Making Calls To select the receiver volume (HIGH, MEDIUM or LOW) or speaker volume (6 levels) while talking To increase, press To decrease, press To redial using the redial list The last 10 numbers dialled are stored in the redial list. 1 Press . • The last number dialled is displayed. . 2 . Ex. Receiver volume: HIGH Speaker volume: level 6 Press or until the desired number is displayed. • To search from the most recent to the oldest number, press .
KX-TCD715EM-3Basic1 01.7.19 2:13 PM Page 23 To store a redial number in the phonebook While the desired number is displayed, press , then see “To store an entered number in the phonebook”, from step 3. To store an entered number in the phonebook 1 • The entered number is displayed. • If you misdial, press C . Digits are erased from the right. To clear a number in the redial memory 2 . While the desired number is displayed, press .
KX-TCD715EM-3Basic1 01.7.19 2:13 PM Page 24 Making Calls With the Base Unit (Digital Speakerphone) 1 Press Hands-Free Digital Speakerphone . • The indicator lights. 2 Dial a telephone number. • If you misdial, press again. then dial 3 When the other party answers, talk into the MIC. 4 To hang up, press . • The indicator light goes out. • The base unit speaker phone cannot be used while a handset is in use. Wait until the in use indicator ( ) goes out.
KX-TCD715EM-3Basic1 01.7.19 2:13 PM Page 25 Answering Calls If you subscribe to a Caller ID service, the calling party information will be displayed after the first ring (p. 26). Please wait until the second ring to answer a call in order to view the Caller ID information. You can also program the desired external ringer type (p. 52). Make sure that the power is ON (p. 13), otherwise the handset will not ring.
KX-TCD715EM-3Basic1 01.7.19 2:13 PM Page 26 Caller ID Service This unit is compatible with a Caller ID service offered by your telephone company. After subscribing to a Caller ID service, the calling party information will be displayed after the first ring. The unit can record information of up to 50 different callers in the Caller List. Using this list, you can automatically call back a caller. You can store a caller’s phone number from the Caller List into the phonebook.
KX-TCD715EM-3Basic1 01.7.19 2:13 PM Page 27 Using the Caller List Viewing the Caller List Information of up to 50 different callers is sorted from the most recent to the oldest call in the Caller List. When the 51st call is received, the first caller’s information is deleted. Each caller’s phone number received is shown. If a call is received with the private name display function (p. 32), the caller’s name will be shown. To confirm who has called you, follow the steps below.
KX-TCD715EM-3Basic1 01.7.19 2:13 PM Page 28 Using the Caller List Calling Back from the Caller List Make sure that the power is ON (p. 13) and the unit is in the standby mode. 1 2 Press or until the desired caller number is displayed. Press or 3 . • The handset will return to the standby mode. . • The displayed phone number is dialled automatically. To hang up, press • In some cases, you may have to edit the number before dialling (see below).
KX-TCD715EM-3Basic1 01.7.19 2:13 PM Page 29 Storing the Caller List Information in the Phonebook You can store phone numbers that are in the Caller List into the phonebook. You can also assign the caller information to one of 9 categories to use the private category feature (p. 36). Make sure that the power is ON (p. 13) and the unit is in the standby mode. 1 Press or until the desired caller number is displayed, then press 2 5 . 6 Enter the name, up to 16 characters (p. 32). 7 Press 8 .
KX-TCD715EM-3Basic1 01.7.19 2:13 PM Page 30 Using the Caller List Clearing the Caller List You can clear some or all entries in the Caller List. Make sure that the power is ON (p. 13) and the unit is in the standby mode. To clear a specific entry from the Caller List To clear all entries in the Caller List 1 Press or until the caller information you want to clear is displayed, then press . 1 Press or until the caller information you want to clear is displayed, then press .
KX-TCD715EM-4Basic2 01.7.19 2:13 PM Page 31 Using the Phonebook After subscribing to a Caller ID service, you can store up to 200 names and phone numbers in the phonebook. All phonebook items are sorted by the first word in alphabetical order. Using the phonebook, you can make a call by selecting a name on the display. You can also assign the caller’s information to one of 9 private categories (1–9) to use the private category feature (p. 36).
KX-TCD715EM-4Basic2 01.7.19 2:13 PM Page 32 Using the Phonebook Storing Names and Numbers in the Phonebook After caller information is categorized in the phonebook, you can select the backlight color and ringer type for each private category (p. 36). Make sure that the power is ON (p. 13) and the unit is in the standby mode. 1 2 Press . Press or 6 until the arrow points to “New Phonebook”, then press • The display shows the number of remaining phonebook items then “”.
KX-TCD715EM-4Basic2 01.7.19 2:13 PM Page 33 To enter names selecting characters The dialling buttons can be used to enter letters and character symbols. The letters are printed on the dialling buttons. Pressing each button selects a character as shown on page 34, 35. To change the character mode You can select one of 6 character modes by pressing The factory preset is “ABC”. Press 2 Press while entering a name. or until the arrow points to the desired character mode, then press .
KX-TCD715EM-4Basic2 01.7.19 2:13 PM Page 34 Using the Phonebook Character mode table Buttons 1 2 3 4 5 6 7 8 9 0 ABC (Alphabet) ΑΒΓ (Greek) 0–9 (Numeric) AÄÅ (Extended 1) #&’() ,–./ 1 #&’() ,–./ #&’() ,–./ #&’() ,–./ 1 #&’() ,–./ #&’() , –.
KX-TCD715EM-4Basic2 01.7.19 2:13 PM Page 35 Character mode table Buttons 1 2 (Russian) S Ś Š (Extended 2) #&’() ,–./ #&’() ,–./ #&’() , –. / #&’() ,–./ AÁÄĄBCĆČ aáäĄbcĆČ DĎEÉ F d Ď eé 4 Chapter 2 3 f GHIÍ ghiÍ JKLŁĹ Basic Operations 5 jklŁĹ 6 7 MNŃ OÓÖŐ mnŃ oóöő PQRŔ pqrŔ 8 SŚŠ sŚŠ TŤÚÜŰV tŤúüŰv 9 WXYÝZŹŻŽ wxyýzŹŻŽ 0 blank blank blank blank The following small letters of Greek, Russian (Cyrillic), Polish, Czech and Slovakian are not available.
KX-TCD715EM-4Basic2 01.7.19 2:13 PM Page 36 Using the Phonebook Using the Private Category Feature After subscribing to a Caller ID service, you can select the display backlight color and ringer type for each private category. When receiving a call, you can easily figure out who has called by setting backlight color and ringer type of each private category. Make sure that the power is ON (p. 13) and the unit is in the standby mode.
KX-TCD715EM-4Basic2 01.7.19 2:13 PM Page 37 Finding Items in the Phonebook Make sure that the power is ON (p. 13) and the unit is in the standby mode. 1 Press To search for a name by initial to enter the phonebook. • The first item is displayed. 1 Press or is displayed. 2 until the desired name Press Ex. To find “Felix”, press 3 repeatedly until the first item under “F” is displayed. . 3 Alphabet Letter Symbol Press until the desired name is displayed.
KX-TCD715EM-4Basic2 01.7.19 2:13 PM Page 38 Using the Phonebook Editing an Item in the Phonebook Make sure that the power is ON (p. 13) and the unit is in the standby mode. 1 Press 6 to enter the phonebook. • The first item is displayed. 2 Press or . • You can also search for the item by initial (p. 37). H Edit Clear Reg. To Hot Key 3 • Pressing C erases the digit to the left of the cursor. To erase all digits, press and hold C .
KX-TCD715EM-4Basic2 01.7.19 2:13 PM Page 39 Hot Key Dial The dialling buttons (1–9) function as one-touch dials. You can assign up to 9 phone numbers from the phonebook items into dialling buttons as hot key dials. Make sure that the power is ON (p. 13) and the unit is in the standby mode. Storing phonebook items as hot key dials 1 Press Dialling a stored number 1 to enter the phonebook.
KX-TCD715EM-4Basic2 01.7.19 2:13 PM Page 40 Using the Phonebook Phonebook Copy You can copy the information in the phonebook between the handsets registered in the same base unit. The phonebook copy must be operated in intercom mode (see page 41). Ex. Handset 2 is coping the phonebook to Handset 1 during an intercom call. To copy the specified item in the phonebook To copy all the items in the phonebook Handset 1 (Receiver): Handset 1 (Receiver): 1 During an intercom call, press 2 Press or .
KX-TCD715EM-5Basic3 01.7.19 2:13 PM Page 41 Intercom A 2-way intercom is available between the handset and the base unit. Paging the base unit from the handset 1 Handset: Press I N T , then 0 . •“ 3 or Handset or Base unit: To end the intercom, press on the handset, OR or on the base unit. . • The handset rings for 1 minute and “ flashes. • To stop paging, press again. to answer. Base unit: Talk into the MIC. Base unit: Press 2 Handset: Press ” to answer. 3 Base unit: Talk into the MIC.
KX-TCD715EM-5Basic3 01.7.19 2:13 PM Page 42 Intercom Transferring a Call Using the Intercom The intercom can be used during a call. This feature enables you to transfer a call between the handset and the base unit. From the handset to the base unit 1 Handset: During a call, press I N T then 0 . • The call is put on hold and “ ” is displayed. • If the base unit user does not answer, press I N T . 2 3 Base unit: Press page. or to answer the Transffering a call: Handset: Press .
KX-TCD715EM-5Basic3 01.7.19 2:13 PM Page 43 Special Features How to Use the Pause Feature (For Analog PBX Line/Long Distance Service Users) We recommend you press distance service. if a pause is required for dialling with a PBX or to access a long Ex. Line access number 9 (PBX) 9 ➡ ➡ Phone number Setting the pause timing 1 Press . 2 Press or 6 until the arrow points to “Setting Base”, then press • “Input Command” is displayed. 3 4 Press 3 . Enter the 4-digit base unit PIN (p. 55). .
KX-TCD715EM-5Basic3 01.7.19 2:13 PM Page 44 Special Features Setting the Key Lock You can lock the handset dialling buttons. Only incoming calls are accepted until the key lock is cancelled. When the unit is in the standby mode, press and hold until a beep sounds. Base 1 [X] • “ [X]” is displayed and all dialling buttons are locked. 12.04 15:00 To cancel the key lock When the unit is in the standby mode, press and hold for about 2 seconds. • “ [X]”will disapper and the key lock will be cancelled.
KX-TCD715EM-5Basic3 01.7.19 2:13 PM Page 45 Call Waiting and Caller ID Compatible If you subscribe to Caller ID and Call Waiting service, your handset displays a second caller’s information while talking. After you hear a second caller waiting tone, the caller’s phone number and “CALL WAITING” will be displayed. You can answer the second call, keeping the first call on hold. • If the phone number is stored in the directory, the caller’s name will be displayed (p. 32).
KX-TCD715EM-6Advance1 01.7.19 2:14 PM Page 46 Direct Call You can easily make a call using a stored direct call number by pressing or . Incoming calls are accepted. To use this feature, store the direct call number and turn on the mode by programming. The factory preset is OFF. Setting the Direct Call Number and Mode After storing the direct call number, the unit will automatically switch to the direct call mode.
KX-TCD715EM-6Advance1 01.7.19 2:14 PM Page 47 Call Prohibition You can prohibit anyone from making a call with your handset except for emergency calls. Incoming calls are accepted. To use this feature, turn on the call prohibition mode by programming. The factory preset is OFF. Make sure that the power is ON (p. 13) and the unit is in the standby mode. 1 Press . 2 Press or 7 to “Setting Handset”, then press .
KX-TCD715EM-6Advance1 01.7.19 2:14 PM Page 48 Call Restriction You can restrict desired handset(s)/base unit from dialling selected phone numbers. Phone numbers beginning with the restricted digits cannot be dialled out. For example, if “00” is assigned as the call restriction number, international calls cannot be made. For selected handset(s)/base unit, you can assign up to 6 call restriction numbers (up to 8 digits).
KX-TCD715EM-6Advance1 01.7.19 2:14 PM When you dial a restricted number, the call is disconnected and the dialled number flashes. Ex. The restricted number is “00”. 00 Page 49 To cancel the call restriction number(s) Follow steps 1 to 6 on page 48. In step 7, press until the call restriction number you want to cancel is displayed. Then erase the number by pressing C . • The call restriction number is cleared. To cancel the call restricted handset(s) Follow steps 1 to 2 on page 48. 2 Press 6 .
KX-TCD715EM-6Advance1 01.7.19 2:14 PM Page 50 Setting the Time Alarm The handset will sound an alarm at a preset time for 30 seconds just for once or repeated daily. You can also select the ringer type for time alarm (p. 52). If you select the melody for time alarm, the handset will sound longer (It depends on the ringer type). You must set the date and time before setting the alarm time. Make sure that the power is ON (p. 13) and the unit is in the standby mode. To turn off the time alarm 1 Press .
KX-TCD715EM-7Advance2 01.7.19 2:14 PM Page 51 Other Programmable Settings Selecting the Talk Mode Display You can choose whether to display the length of the call or the dialled telephone number while in the talk mode. The factory preset is the length of the call. Make sure that the power is ON (p. 13) and the unit is in the standby mode. 1 Press . 2 Press or During a conversation, the display will be as follows. until the arrow points to “Setting Handset”, then press .
KX-TCD715EM-7Advance2 01.7.19 2:14 PM Page 52 Other Programmable Settings Setting the Handset Ringer Type You can program the desired handset ringer type for external/internal calls and paging, time alarm. External ringer type (p. 25) You can select the external ringer type. 20 ringer types are available. The factory preset is type 1.
KX-TCD715EM-7Advance2 01.7.19 2:14 PM Page 53 Setting the Call Waiting Tone If an incoming call has been received during an intercom between handsets, a call waiting tone sounds. You can choose whether or not the tone sounds. The factory preset is ON. Press or to select “Setting Handset” then “Tone Option” then or or or to select to select “Call Waiting” then to select ON or OFF Setting the Range Warning Alarm You can choose whether or not the handset will sound a range warning alarm.
KX-TCD715EM-7Advance2 01.7.19 2:14 PM Page 54 Other Programmable Settings Selecting the Base Unit Ringer Type You can program the desired base unit ringer type (6 types). The factory preset is type 1. Press or to select “Setting Base” then 2 3 Ringer type (1–6) Setting the Key Tones You can choose whether or not the handset keys will sound tones (key tone, confirmation tone, error tone). The factory preset is ON.
KX-TCD715EM-7Advance2 01.7.19 2:14 PM Page 55 Setting the PIN You can program a 4-digit handset/base unit PIN (Personal Identification Number). The factory preset is 0000. Changing the PIN may prevent the unauthorised use of your unit by another person. Make sure that the power is ON (p. 13) and the unit is in the standby mode. Once you have programmed the PIN, you cannot confirm it. We recommend you write down the PIN. If you do forget it, please consult the Panasonic Customer Care Helpline.
KX-TCD715EM-7Advance2 01.7.19 2:14 PM Page 56 Clearing the Settings in Memory On the handset This function enables the handset to clear the following settings at one time. They will return to their initial settings. Function Time Alarm Alarm ON/OFF Handset ringer volume External ringer type Internal ringer type Paging type Alarm type Private ringer Key tones Call waiting tone Range warning alarm Battery low alarm Standby mode display 1 Press .
KX-TCD715EM-7Advance2 01.7.19 2:14 PM Page 57 On the base unit This function enables the base unit to clear the following settings at one time. They will return to their initial settings. Function Bell selection Bell interval (First ring) Earth/time break recall Pause timing Call restricted handset(s) 1 Press .
KX-TCD715EM-8Multi 01.7.19 2:14 PM Page 58 For Optional Multi-Unit Users Operating More than One Handset You can register and operate up to 6 handsets at the base unit. Operating more than one handset allows you to have an internal call while simultaneously conducting an external phone call using another handset. Radio Range H3 H2 H1 Ex. 6 optional handsets are added to a base unit. Handset 1 is engaged in an internal call with handset 3. Handset 2 is engaged in an external call.
KX-TCD715EM-8Multi 01.7.19 2:15 PM Page 59 Registering Handset(s) in the Base Unit You must register the handset in the base unit before use. • Charge the optional handset batteries for about 15 hours before initial use. • Make sure that the power is ON (p. 13) and the unit is in the standby mode. • Register the handset number within 1 minute. If not registered within 1 minute, press handset to cancel the programming mode. Then start again from step 1. 1 2 Handset: Press .
KX-TCD715EM-8Multi 01.7.19 2:15 PM Page 60 For Optional Multi-Unit Users Selecting the Base Unit Access Automatic base unit access (Auto) The handset automatically selects a registered base unit. • When the handset moves to another base unit radio area, it loses contact with the previous base unit and automatically accesses the new base unit. • If the handset is in the overlap area between several base unit radio areas, the handset will access a base unit in the order of the base unit numbers.
KX-TCD715EM-8Multi 01.7.19 2:15 PM Page 61 Cancelling a Handset Each handset can cancel itself or another handset. Make sure that the power is ON (p. 13) and the unit is in the standby mode. 1 Press . 2 Press or 5 • The selected handset number(s) flash(es). Ex. The handset No. 5 is selected. until the arrow points to “Setting Base”, then press . • “Input Command” is displayed. 4 Input Command 7 123456 Press 7 . Enter the 4-digit base unit PIN (p. 55).
KX-TCD715EM-8Multi 01.7.19 2:15 PM Page 62 For Optional Multi-Unit Users Bell Selection There are three choices for bell selection. When a call is being received: — all handsets ring. “All handsets” — the selected handset(s) ring(s). “Specified handset(s)” — the selected handset rings first, then if it does not answer, all other handsets will ring. “First handset” The factory preset is “All handsets”. To change the bell selection, program as follows. Make sure that the power is ON (p.
KX-TCD715EM-8Multi 01.7.19 2:15 PM Page 63 Selecting first handset Selecting all handsets One handset will ring first, then all other handsets will ring if the first handset is not answered. You can choose which handset will ring first and the ring count (1 to 6) until all of the handsets ring. The factory preset is 3 rings. When a call is received, all handsets will ring at the same time. Follow steps 1 to 4 on page 62. 2 Press 3 . • The current registered handset number(s) is/are displayed.
KX-TCD715EM-8Multi 01.7.19 2:15 PM Page 64 For Optional Multi-Unit Users Selecting the Standby Mode Display You can choose whether to display the currently connected base unit number, handset number or no display while in the standby mode. The factory preset is the base unit number. Make sure that the power is ON (p. 13) and the unit is in the standby mode. 1 Press . 2 Press or 7 until the arrow points to “Setting Handset”, then press . 3 4 Press mode. to return to the standby Ex.
KX-TCD715EM-8Multi 01.7.19 2:15 PM Page 65 Paging/Intercom Intercom between the Handset(s) and the Base Unit A 2-way intercom is available between one of the handsets and base unit when another handset is not having an outside call. The base unit user can page the handset users individually or at one time. Paging a handset from the base unit (Individual paging) The base unit user can talk with the handset user who answered the page first.
KX-TCD715EM-8Multi 01.7.19 2:15 PM Page 66 Paging/Intercom Transferring a Call from the Base Unit to a Handset The intercom can be used during a call. This feature enables you to transfer a call between a handset and the base unit. 1 Base unit: During a call, press and enter the handset number you want to page, then press . 3 • The transfer is completed. Handset can answer the call. • The call is put on hold. • If the handset user does not answer, press .
KX-TCD715EM-8Multi 01.7.19 2:15 PM Page 67 Transferring a Call from One Handset to Another The intercom can be used during a call, enabling you to transfer a call between handsets. Transferring a call using the intercom Transferring a call without the intercom Ex. Handset 1 is transferring a call to Handset 2. This feature enables you to transfer the call to another handset without waiting for the paged handset to answer. 2 3 Handset 1: During a call, press I N T .
KX-TCD715EM-8Multi 01.7.19 2:15 PM Page 68 Paging/Intercom Conference During a call using the handset, you can make an intercom call to another handset and then combine the calls together to establish a conference call. 1 Handset 1: During a call, press I N T . Then enter the desired handset number. • The call is put on hold. • If there is no answer, press I N T to return to the call. 2 68 Handset 2: When the unit rings, press answer. to 3 Handset 1: Press 3 to establish a conference call.
KX-TCD715EM-9Useful-OPT 01.7.19 2:23 PM Page 69 Using a Belt Clip You can hang the handset on your belt or pocket using the belt clip. To attach the belt clip To remove the belt clip Using an optional Headset Plugging an optional headset into the handset allows a hands-free phone conversation. Please use only the Panasonic KX-TCA89EX headset. Connecting the headset to the handset Useful Information Open the headset jack cover, and connect the headset to the headset jack as shown.
KX-TCD715EM-9Useful-OPT 01.7.19 2:23 PM Page 70 Replacing the Batteries Selecting the battery type Two Nickel metal hydride (Ni-MH) batteries are included with this unit. Nickel cadmium (Ni-Cd) rechargeable batteries can also be used. If you replace the batteries with Ni-Cd batteries, you must set the battery type selection to “Ni-Cd”, or the battery strength will not be displayed correctly. The factory preset is “Ni-MH”. 1 2 3 4 Press .
KX-TCD715EM-9Useful-OPT 01.7.19 2:23 PM Page 71 Caution: To reduce the risk of fire or injury to persons, read and follow these instructions. 1. 2. 3. 4. Use only the batteries specified. Do not use non-rechargeable batteries. Do not mix old and new batteries. Do not dispose of the batteries in a fire. They may explode. Check with local waste management codes for special disposal instructions. 5. Do not open or mutilate the batteries.
KX-TCD715EM-9Useful-OPT 01.7.19 2:23 PM Page 72 Wall Mounting This unit can be mounted on a wall. 1 Connect the AC adaptor. To Power Outlet 2 Tuck the Telephone line cord inside the wall mounting adaptor, then push it in the direction of the arrow. • The word “UP” should face upward. 3 Install screws using the wall template below. Connect the Telephone line cord. Mount the unit, then slide down. Screws Screws 8.
KX-TCD715EM-9Useful-OPT 01.7.19 2:23 PM Page 73 Option Covers You can change the look of your phone’s handset with option covers (KX-A109EX). 1. Turn the power OFF to prevent memory loss (p. 11). Remove the battery cover by sliding while pressing the arrow. Remove the batteries. 2. The option cover is locked with the right and left tabs. Unlock one of the tabs by pressing horizontally # and vertically $, and partially pull down the option cover %, &, as shown. Repeat this operation on other tab.
KX-TCD715EM-9Useful-OPT 01.7.19 2:23 PM Page 74 Before Requesting Help Problem The unit does not work. • Turn the power ON (p. 13). • Check the settings (p. 11–20). • Charge the batteries fully (p. 12). • Clean the charge contacts and charge again (p. 12). • Unplug the AC adaptor and turn the power OFF to reset. Plug in the AC adaptor and turn the power ON. Then try again. • The handset has been canceled or has not been registered. Register the handset (p. 59).
KX-TCD715EM-9Useful-OPT 01.7.19 2:23 PM Problem Page 75 Remedy The handset does not ring. • Turn the power ON (p. 13). • The ringer is set to OFF. Select the desired volume level (p. 20). The base unit does not ring. • The ringer is set to OFF. Set to HIGH, MEDIUM or LOW (p. 20). You cannot program function items such as selecting language. • Programming is not possible while the unit is in the talk, intercom or speakerphone mode. • Do not pause for over 60 seconds while programming.
KX-TCD715EM-9Useful-OPT 01.7.19 2:23 PM Page 76 Before Requesting Help Problem 76 Remedy The paged handset does not answer. • The handset is not in the same radio area. • The handset is engaged in an outside call. • The handset has been cancelled or has not been registered. Register the handset in the base unit (p. 59). While using the intercom, two tones sound. • A call is being received. To answer, press or and . The unit misdials when connected to a PBX. • Check the pause function (p. 43).
KX-TCD715EM-9Useful-OPT 01.7.19 2:23 PM Page 77 Safety Instructions Take special care to follow the safety suggestions listed below. Safety 1) The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. 2) When the unit is not used, turn the power off. When left unused for a long period of time, the base unit should be unplugged from the household AC outlet.
KX-TCD715EM-9Useful-OPT 01.7.19 2:23 PM Page 78 Term Definitions DECT The abbreviation DECT means “Digital Enhanced Cordless Telecommunications”. Advantages of DECT Excellent voice quality: Through sampling of digital signals DECT units obtain nearly noiseless transmission. High grade taping security: Based on digital transmission, DECT conversations are well protected against unapproved monitoring. Multi-Handset operation: To operate several handsets at the base unit, no cable installation is required.
KX-TCD715EM-9Useful-OPT 01.7.19 2:23 PM Page 79 GUARANTEE CONDITIONS OF GUARANTEE This guarantee is in addition to and does not in any way affect any statutory or other rights of consumer purchasers. If within the applicable guarantee period, the appliance proves to be defective by reason of faulty design, workmanship or materials, we undertake subject to the following conditions to have the defective appliance (or any part or parts there of) repaired or replaced free of charge. 1.
KX-TCD715EM-9Useful-OPT 01.7.19 2:23 PM Page 80 MODEL No. KX-TCD715EM Manufacturer's Declaration: Hereby, Kyushu Matsushita Electric (U.K.) Ltd., declares that this Dect Cordless Telephone is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Acopy of the manufacturer's declaration of conformity to the essential requirements of the R&TTE Directive is available at the following web address: http://doc.panasonic-tc.de Customer Care Helpline Tel. No.
