Operating instructions

Preparation
8
Menu icons
When in standby mode, pressing the middle
soft key reveals the handset’s main menu.
From here you can access various features
and settings.
Soft keys
The handset features 3 soft keys. By
pressing a soft key, you can select the
feature or operation indicated by the soft key
icon shown directly above it.
L Pressing the left, middle, or right soft key
selects the leftmost, centre, or rightmost
soft key icon respectively.
L The icons shown will vary depending on
how you are using the unit.
Soft key icons
x Handset is accessing base
unit. (intercom, paging,
changing base unit settings,
etc.)
k Handset is on an outside
call.
x Call bar is on. (page 23)
y Missed call (Caller ID
subscribers only; page 30)
i Batteries are charging.
1 Battery strength
e Alarm is on. (page 20)
d Voice enhancer is set to
high or low tone. (page 14)
U Ringer volume is off. (page
20)
f Night mode is on. (page 21)
[2] Handset number: The left
icon shows handset 2
example. (page 22)
-2- Base unit number: The left
icon shows base unit 2
example. (page 22)
h New SMS message
received (SMS users only;
page 34)
j Your written SMS message
is over 160 characters.
(SMS users only; page 33)
m SMS memory is full. (SMS
users only)
Line is being used by
another handset.
Display
icon
Meaning
Menu
icon
Menu/feature
W Caller List
X SMS (Short Message Service)
b Time Settings
Y Handset Setup
Z Base Unit Setup
a Display Setup
Soft
key
icon
Action
v Returns to the previous
screen.
$ Displays the main menu.
, Accepts the current selection.
q Displays a previously dialled
phone number.
U Opens the phonebook.
C
s
i
h
T
TCD300CX(e).book Page 8 Monday, January 31, 2005 1:49 PM