Operating Instructions Quick Guide

– 2 –
Base unit
Displays
Display icons
Various icons appear on the handset display to indicate the current status of the unit.
A {x} (Page)
B Charge contact
B
bA
w Within range of a base unit
L When flashing: Handset is
searching for base unit. (out
of range of base unit,
handset is not registered to
base unit, no power on base
unit)
x Handset is accessing base unit.
(intercom, paging, changing
base unit settings, etc.)
k Handset is on an outside call.
x Call bar is on.
y Missed call (Caller ID
subscribers only)
i Batteries are charging.
1 Battery strength
e Alarm is on.
d Voice enhancer is set to high or
low tone.
U Ringer volume is off.
f Night mode is on.
[2] Handset number: The left icon
shows handset 2 example.
-2- Base unit number: The left
icon shows base unit 2
example.
h New SMS message received
(SMS users only)
j Your written SMS message is
over 160 characters. (SMS
users only)
m SMS memory is full. (SMS
users only)
{ Line is being used by another
handset.
TCD300FX_QG.fm Page 2 Friday, October 15, 2004 11:44 AM