Operating Instructions

Base Unit Settings
34
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
8 Select a memory location, then press {>} .
L If the memory location already contains a
restricted number, the number is
displayed.
9 Enter the phone number or area code to be
restricted (8 digits max.), then press
{j /OK } .
L To erase a restricted number, press
{ C/ T } .
10 Press {ih} .
Other options
Changing the base unit PIN (Personal
Identification Number)
For security, the base unit PIN must be entered
when changing certain settings. The default PIN
is
“ 0000 ” .
Important:
L If you change the PIN, please make note of
your new PIN. The unit will not reveal the PIN
to you. If you forget your PIN, consult your
nearest Panasonic service centre.
1 Press {j /OK } .
2 Select “ Base Unit Setup ” , then press
{>} .
3 Enter “ 0000 ” (default base unit PIN).
L If you changed the PIN, enter it.
4 Select “ Other Options ” , then press {>} .
5 Select “ Base Unit PIN ” , then press {>} .
6 Enter the new 4-digit base unit PIN, then
press
{j /OK } .
7 Press {ih} .
Resetting the base unit to its default
settings
1
Press {j /OK } .
2 Select “ Base Unit Setup ” , then press
{>} .
3 Enter “ 0000 ” (default base unit PIN).
L If you changed the PIN, enter it (page 34).
4 Select “ Other Options ” , then press {>} .
5 Select “ Reset Base ” , then press {>} .
6 Select “ Yes ” , then press {>} .
7 Press {ih} .
Note:
L The following items will be deleted or reset to
their default settings:
– Settings listed on page 31, 42, 51
– All SMS messages
– Private mailbox settings for SMS
– Caller list
L The following items will be retained:
– Date and time
– Shared phonebook entries
– Recordings, including your greeting
message, caller messages, voice memos,
audible call announcements, and recorded
conversations